Used Run Winch for sale (8,520)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Bedpfsyug Hxsx Aa Iedh enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch 1.5 kw Bdsdpfsz E Nhvsx Aa Ish 5.7 m3/hr H max 60m

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: M71311, functionality: fully functional, operating hours: 1,500 h, pressing force: 160 t, stroke length: 300 mm, operating speed: 110 mm/s, reverse speed: 10 mm/s, table width: 90 mm, table length: 3,060 mm, table height: 960 mm, distance table to ram: 590 mm, total length: 4,000 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 15,000 kg, year of last overhaul: 2026, Equipment: safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 160-3100 NS (160T - 3060 mm) Tooling system: WILA Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive Bdsdpfjz Ibnyox Aa Ieh - Pressing force: 160 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Back gauge controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - Light curtain - programmable - WILA tooling system - Hydraulic punch clamping and hydraulic die clamping - Lower table compensation - "CROWNING" - CNC controlled - Front supports - 2 pcs, 150 kg/pc, length 950 mm

Year of construction: 2019, condition: used, functionality: unexamined, Montanari Traction Winch for Elevator (Gearbox & Motor) - Year 2019 Selling a used elevator traction unit from the Italian brand Montanari Giulio & C. Composition of the unit: 1. Speed Reducer (Winch) o Model: M93 B9/1 o Reduction ratio: 1/39 o Serial number: 496692 o Year of manufacture: 2019 o Lubrication: Uses synthetic oil. o Equipped with a large 5-groove traction sheave 2. Electric Motor o Brand: Montanari o Type: MPV160L.40 (Three-phase asynchronous motor) o Power: 13 / 13.25 kW o Frequency: 50 Hz o Speed: 1380 / 315 rpm o Voltage: 230 / 400 V o Insulation class: F 3. Electromagnetic Brake o Model: EM500 o Voltage: 48V D.C. o Current: 2.7 A o Connection type: Parallel connection. o Equipped with a red manual release lever Key Features: Bdsdpsy U I R Hjfx Aa Ieh • Leading brand in the elevator industry. • Recent year of manufacture (2019). • Complete unit, ready for installation. • Traction sheave in excellent condition. The equipment is sold as is. Price: €2000 For more information or to arrange a visit, please contact me by message or WhatsApp.

Condition: used, Year of construction: 1999, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 180 mm, table width: 4,000 mm, overall weight: 16,000 kg, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Bdedpfx Aozzknrsa Ieh Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, mileage: 8,000 km, power: 390 kW (530.25 HP), first registration: 12/2018, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, Manufacturer Mercedes Model Arocs 4153 8x4 MPG 220 TM7 Winch Year 2018 Condition Very good Serial Number WDB96403810274993 Ref. nr. 538158 Reg. date: Last seen: 26-09-2025 Hk: 530 Km: 8000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 500 Air conditioning: ? Number of beds: 1 Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 60 - 60 - 80 - 80 % Front suspension: Springs Suspension rear: Air Wheelbase: 6400 mm Hydraulic system: ? Total weight: 37000 Kg Net weight: 35600 Kg Crane Manufacturer: MPG 220 TM 7 Tonsmeter: 220 Remote control: ? Year: 2018 Extension extension (hydraulic): 7 Bdsdpfozlxaqsx Aa Ijh Max range (hydraulic): 25 m

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Bdsdpfezzffrjx Aa Ijh

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Bsdpfx Aoy Avl Ioa Iedh Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: used, mileage: 73,765 km, power: 478 kW (649.90 HP), first registration: 12/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,350 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, navigation system, parking heater, retarder, seat heater, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Roof spoiler - Remote central locking - LED headlights - Alloy wheels - Air suspension - Tow hitch - Engine brake - Hub reduction - PTO - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Scania R650 8x4 435 cm wheelbase. "King of the Road" version. All-round air suspension. Retarder. 140,000 kg GVWR. 3.5" Jost fifth wheel. Adaptive cruise control. Refrigerator. Heated and ventilated driver's seat. Alcoa wheels. Van Rijssel body. Finished with stainless steel all around. Compartment wall/headboard with equator support. Stainless steel chain drawers between the axles. Box/drawer under the battery compartment. Box under the crane on the right side. Crane: HMF 9520 OK6 Jib FJ 2000 K6 Winch. Pre-stamping. Scanreco remote control with flippers. Removable ballast box, mounted on twist locks. Recessed tie-down eyes. Removable aluminum plates and stakes. Dimensions: 480 cm x 248 cm. Floor height: 140 cm. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Bdsdez H T H Sepfx Aa Ish Front Axle 2: Tire size: 385/65R22.5; Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear Axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75% Rear Axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 26,553 kg Payload: 12,447 kg GVWR: 39,000 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: R650 V8 8x4 / HMF 9520 + JIB + W = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: Numer fabryczny maszyny B0503A0341, functionality: fully functional, operating hours: 29,000 h, For sale, a used TRUMPF TruBend 5085 edge bending machine, manufactured in 2009. The machine is in unique technical condition – very good! The machine has a low number of operating hours – 8250. In 2020, the control system was replaced with a new one at an operating hour count of 20500. The actual total operating hours of the machine are 29000. Machine serial number: B0503A0341 Hydraulics: Hoerbiger Year of manufacture: 2009 Maximum pressing force: 850 kN Working length: 2720 mm Opening: 415 mm, Throat: 420 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Bedjy Tluyspfx Aa Iodh Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 - Upper drive in a four-cylinder version Y1/Y2 - 4-axis back gauge - X, R, Z1, Z2 Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Bedpjykyuzofx Aa Iedh Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: excellent (used), mileage: 678,627 km, power: 324 kW (440.52 HP), first registration: 09/2006, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, Year of construction: 2006, Equipment: crane, = Additional options and accessories = - PTO = Remarks = Crane Number of hydraulic extensions: 7 Remote control: ✓ Winch: ✓ YV2AS02G36A620259 = More information = Cab: single Empty weight: 10.117 kg Carrying capacity: 21.883 kg GVW: 32.000 kg Crane: HIAB 422 E-7, behind the cab Make of bodywork: HIAB 422 E7 Technical condition: very good Visual appearance: very good Registration number: 1BHN143 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Bdodpfx Aaeymqate Ijh Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Bsdpfx Aaszrwc Ds Isdh Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: excellent (used), mileage: 351,906 km, power: 382 kW (519.37 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,400 mm, loading space width: 2,480 mm, Year of construction: 2017, Equipment: crane, retarder, = Additional options and accessories = - Intarder - PTO = Remarks = Crane Number of hydraulic extensions: 10 Number of support legs: 4 Remote control: ✓ Winch: ✓ Meter capacity: 34 m Capacity kilo: 4600 kg YS2R8X40002124470 = More information = Bdsdpfxjzal Tbo Aa Ijh Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 25.751 kg Carrying capacity: 13.249 kg GVW: 39.000 kg Functional Crane: PALFINGER PK72002 C, behind the cab Make of bodywork: PALFINGER 72002 Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Serial number: E10156 / B0105A0067 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat depth (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Bjdpfez Hk Iajx Aa Iodh Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil capacity: approx. 95 l Diameter of hydraulic cylinder: 190 mm Dimensions and weight of the machine: Total weight: approx. 18,000 kg External dimensions of the machine (W x D x H): approx. 5,000 × 2,210 × 3,100 mm. The machine is offered without tooling.

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Bsdjyc T Apepfx Aa Isdh Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: used, Year of construction: 2012, functionality: fully functional, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Distance between uprights: 2600 mm Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Working speed: 11 mm/s Return speed: 100 mm/s Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production Bsdpfeyxp Eyex Aa Ijdh If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Bjdpfjyyu S Usx Aa Iedh

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Bdedpfx Aezqtb Tja Ieh

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical specifications of the DURMA AD-S 30175 press brake: Bdjdpfx Ajz Diu Tja Ioh number of axes: 4 (X, Y1, Y2, R) maximum pressing force: 175 t maximum bending length: 3050 mm slide stroke: 265 mm reach: 410 mm approach speed: 140 mm/s bending speed: 10 mm/s return speed: 130 mm/s distance between columns: 2600 mm dwell time: 102 ms dwell distance: 8 mm safety distance: 263.2 mm oil tank volume: 200 l maximum operating pressure: 285 kg/cm2 motor power: 18.5 kW current: 37 A current protection: 50 A control voltage: 24 V power supply: 3 x 400 V; 50 Hz dimensions (L x W x H): 5450 x 2550 x 2750 mm weight of the DURMA AD-SERVO 30175 machine: 10830 kg Equipment of the DURMA press brake: CNC control unit: CYBELEC ModEva 10S manual deflection compensation European-type tool clamping system European-type punches and dies powered back gauge front supports with T-slots and tilting stop

Condition: used, Year of construction: 2008, Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Bedpfx Aajrixi Ts Isdh Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 Bodpjz A Tg Dofx Aa Iedh - Standard tool kit

Condition: good (used), Year of construction: 2011, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Bedpszpd Etjfx Aa Iedh

Condition: used, Year of construction: 2008, MECOS 7-AXIS PRESS BRAKE Bjdez Dwkpspfx Aa Iedh Model SYNCRO 135/3000 Year 2008 Weight kg 13,000 Dimensions mm 4820x2500 H 2850 CNC ESA FEATURES Type of press brake: Hydraulic, Synchro, 7-axis Maximum force: 135 tons Maximum distance between uprights: 450 mm Maximum stroke: 200 mm Approach speed: 200 mm/s Working speed: 0 ÷ 10 mm/s Return speed: 130 mm/s Back gauge stopping distance: 11 mm Laser safety distance – punch: 16 mm Voltage: 400 V Electrical power supply: 50 Hz Phases: 3 Motor power: 15 kW Tank capacity: 200 liters Maximum pressure in hydraulic circuit: 310 bar Length of lifting cables: 2 m Noise level at operator station: 64 dB(A) Machine complete with operating manual and a copy of the CE declaration of conformity. All technical data provided are indicative and may be subject to change without prior notice; therefore, they should not be considered binding.

Condition: as good as new (ex-display), Year of construction: 2023, Adira E-Brake BB base configuration: Adira Electric Press Brake - AD 75 control system (Y1/Y2, X, R, Z1/Z2) with 3D graphical programming and automatic sequence optimization, Bodpfxsz A Thhj Aa Iedh (BG1 for BB3515 and BG2 for 5020) - Bluedrive technology - Standard table with basic 60 mm Promecam dies - Promecam quick-release upper tool holder - 2 front supports on a 500 mm guide rail - IRIS safety light curtains - CE safety compliance - Standard tooling kit - Robot interface