Used Paint Drumming for sale (6,658)

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): Kdsdpfx Aezk Epcjdqor – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. Kdsdpfx Aetu Hpqjdqer The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Kedpfx Ajzuzg Eodqjdr Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), For sale is a like-new JET cylindrical grinding machine, model JWDS 1632, with a maximum grinding width of 406 mm / 812 mm in 2 passes. The machine is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: Kdsdpezgrz Refx Adqsr - Power: 230 V / 1.1 kW / 1.5 HP - Drum speed: 1,450 rpm - Grinding speed: 9.5 m/s - Feed rate: 0 - 3 m/min - Maximum grinding width: 406 mm / 812 mm in 2 passes - Minimum grinding length: 60 mm - Grinding thickness: max / min 75 / 0.8 mm - Dust extraction connection: 100 mm - Dimensions (L x W x H): 1,010 x 510 x 1,270 mm - Weight: 71 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: grinder, grinding machine, grinding Reference: R-R05Y9

Condition: used, power: 60 kW (81.58 HP), overall weight: 11,000 kg, operation weight: 7,280 kg, Year of construction: 2005, EXCELLENT CONDITION Kdodpfjy Hiz Dsx Adqsr

Condition: like new (used), functionality: fully functional, machine/vehicle number: MD1001, total height: 150 mm, total length: 45 mm, total width: 52 mm, overall weight: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT Ksdpewp Slkofx Adqsdr SHIPPING AVAILABLE 🚚 -Brand: Graco -Reference: MD1001 -UPC Code: 633955370647 -General Industry: Paints and Glues -Application: Two-component paints, solvent and water, glues, varnishes, lacquers. -Mixing close to the guns for greater control -Compatible with solvent- and water-based epoxies and polyurethanes -Mixing ratio up to 30:1 -Pressure: 275.6 bar (4000 psi) -Pre-owned, fully inspected -Warranty: 1 year -OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL (PRICE ON REQUEST)

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Kdedpfezdc D Ssx Adqsr Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, Year of construction: 2008, Max. weight per suspension point 44 kg Kjdpfx Adezbvlwsqodr Conveying Technology (Frequency-Controlled) 0,6 - 2,0 m/min Total chain length ca. 40.500 mm indexing 270 mm In our assessment, the paint line is in good used condition. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), functionality: fully functional, 7 units x Ventherm system for surface treatment systems, including a hot air unit with aluminum and copper water heating registers, individual cross-flow heat exchangers for heat recovery, and a ventilation system. We are open to offers for 1-7 units. Kedpfx Aezpzqtjdqodr Inspection is welcome.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, 4 double strokes per 1 liter of material, with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Kodpfx Adjiv Huwoqjdr available from warehouse in Seevetal, subject to prior sale.

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Kedpfx Aeg Sk T Dedqodr Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: good (used), Painting booth with suction device and cabinet Article: Spray booth with extraction unit and cabinet Dimensions spray booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colours: green and black Condition: used  Complete factory locker, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Kdsdpfeg I Dhgjx Adqor Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 hp Permissible total weight: 7500 kg Wheelbase: 3365 mm Standard equipment: • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning • Headlight wipers • Manual air conditioning • Electric parking brake • Driver's seat with suspension • Fog lights (front/rear) • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Electric windows • Hill start assist (HSA) • Bi-LED headlights and taillights • Headlight beam adjustment • Automatic headlights • Warning lights for insufficient securing of the driver's cabin against lifting • Twice adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare tire ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharging with electronically controlled VGS compressor, intercooler, variable exhaust valve control. DISPLACEMENT: 2999 cm³; POWER: 110 kW (150 hp) at 2800 rpm; MAXIMUM TORQUE: 375 Nm at 1280 – 2800 rpm. EXHAUST CONTROL - EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Active emergency brake assist ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking system with pedestrian and cyclist detection EBD: Electronic brake force distribution FVSN: Following vehicle warning system Junction warning: Blind spot warning when turning EVSC: Electronic stability control DDAW: Driver attentiveness warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Rear view camera TSR: Traffic sign recognition MOIS: Motion detection system BSIS: Blind spot assist TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® Transmission and gear ratios: Manual, 6-speed Capacity: 3 persons Axles: 2, including driven rear axle with twin tires Brakes: Front and rear: 310 x 42 mm, internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS according to EC standards, separate brake circuits on both axles. Drum parking brake on the driveshaft. Suspension: Front and rear: Parabolic springs with integrated rubber buffers, double-acting hydraulic telescopic shock absorbers. Stabilizer bar front and rear. Electrical system: Voltage 24 V – Alternator 90 A – 2 x 90 Ah battery (F-Space: 2 x 70 Ah) VEHICLE CONSTRUCTION DATA Hooklift system 90 cm City System Marrell Length: 3300 mm Load capacity: up to 4000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure container stability Hook mechanism frame made of stainless steel Steel structure shot-blasted and painted with epoxy primer Side marker lights Work platforms Work light 1 unit Auxiliary headlights Frame of the rear lamp cover With us, there are no hidden payments: - Delivery costs 0, - Documents 0, - First inspection 0,- Financing or leasing FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Kedpfx Aozr Txbjdqedr Germany We are at your service: ONLINE SALES we speak German we speak English мы говорим по-русски mówimy po polsku

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 Ksdpfx Aov Uvftodqjdr P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,780 kg, maximum load weight: 23,220 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 4 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on front gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size 2 pairs of additional 10 t folding lashing rings 1 on gooseneck (protruding) 1 recessed in floor behind last axle #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Braking System Twin-line air brake system Spring parking brake Kjdpfoznwzrjx Adqjdr 2 non-interchangeable front coupling heads 24 V ABS and ALB with front ABS plug #Electrical System 24 V LED multi-chamber lights, yellow side LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates 24/7 service hotline "Gewährleistungsverlängerung auf Rahmen auf 5 Jahre ab Auslieferungsdatum" Prepared for two-line number plate holder Reflective contour markings to ECE R 048, white sides, red rear #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Galvanised drawbar Hot-dip galvanised loading ramps

Condition: ready for operation (used), Year of construction: 2006, A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment. Ksdpszgwx Isfx Adqsdr

Condition: used, Painting booths Kdsdpjzb Ut Hsfx Adqor nr. 2 pieces left

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed Kdjdpfxjzlyzvo Adqer min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 23,140 kg, overall weight: 28,000 kg, axle configuration: 2 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 800 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,538 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. --- ## Chassis – 2-Axle Jumbo Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * New slightly inclined outer frame with integrated Load-Lock profile for securing lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Free landing leg corner dimension / rear swing clearance approx. 1,920 mm * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards in front of and behind each axle * Spare wheel carrier for one spare wheel, including wheel mounting kit * Lockable plastic toolbox with shelf insert, dimensions: 620 × 360 × 440 mm (W × H × D), padlock not included --- ## Axles & Suspension * Drum brake axles (manufacturer's choice) * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension --- ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified maintenance * Spring-loaded parking brake * Front Duomatic coupling without connecting hoses * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 235/75 R17.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front socket without connecting cable --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * High point-load capacity, suitable for forklift axle loads up to 5,600 kg --- ## Front Wall * Front wall made of 25 mm aluminium hollow profiles, approx. 1,350 mm high * Heavy-duty steel corner posts in volume specification --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Finish * Chassis: hot-dip galvanised or painted according to customer requirements Kjdpfx Ajkv Uvzodqsdr * Aluminium front wall --- # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: good (used), Choice of 40” drums to make products such as hash browns, potato waffles etc. Please note that the triangle hash brown unit has now been sold (August 2025) Kdodjqpd Ttepfx Adqor

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,680 kg, Drum clamp Ksdoyzvlxjpfx Adqedr ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Description: Beer keg clamp, year 2020, ISO 3A (51 cm), capacity 1680 kg, width 1040 mm, forks 1150 mm, ID OS1943

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 4,000 h, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: trumpf, laser hours: 15,231 h, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 250 m/min, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 100 mm Laser power: 5,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited, replaced two years ago Maximum workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Simultaneous positioning speed (X+Y): 300 m/min Maximum steel sheet thickness: 25 mm Maximum stainless steel sheet thickness: 25 mm Maximum aluminum sheet thickness: 15 mm MACHINE DETAILS Electrical operating hours: 39,836 h Cutting hours: 15,231 h Control model: Siemens Sinumerik 840D Control features: Open PC-based control system Online support Diagnostic functions Maintenance log Technological data Remote support Safety equipment: Multi-beam photoelectric barriers and safety enclosure Fully enclosed optical guide with nitrogen ventilation Kdjdpfxoztad Hs Adqor Surveillance system Multi-zone extraction and compact dust filter Paint: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with direct linear motors OTHER FEATURES Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor Programmable power cycles Programmable cutting gas pressure adjustment Laser cutting head with 5", 7.5", 9" and 3.75" lenses Quick-change system for cutting heads Automatic sheet edge detection Capacitive height control and APC process control PCS Upon request, a quotation can be provided for disassembly and preparation for transport.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp Kedpfx Ajx N U R Asdqodr ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Description: Beer keg clamp Year 2019 ISO 3A (51 cm) Capacity 2,000 kg Width 1,020 mm Forks 1,200 mm ID OS1761

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Kdedpfx Adox Rafuoqer Technical condition: good Description: Beer keg clamp Year 2019 ISO 2A (41 cm) Capacity 2,000 kg Width 950 mm Forks 1,200 mm ID OS1826

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Kdodpfow Idbyjx Adqsr Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1