Step By Step Wet Painting Systems

PROTON STP-STP

Year of construction: 2018, condition: like new (used), Dumeta hydraulic welding positioner, height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole, 100–200 mm Table diameter 700 mm Horizontal height min. 0.6 m, max. 1.2 m Tilted height min. 0.40 m, max. 1.0 m Redpfx Abjhua Dqs Escd Speed 0.11–1.25 RPM Weight 750 kg Tilt up to 135° Hand and foot remote control with speed display Very robust

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer Rjdswr A Alopfx Ab Escd

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Rsdpfx Asdrtalsb Eocd Maintenance doors as swing doors Maintenance easy.

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Rodocw Tzxspfx Ab Escd Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. For more information, visit Romer-Deutschland.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 055 - 030.0221, Complete overhaul Year 2003 - Fanuc 16i-T Center height 175 mm and distance between centers 650 mm 2 external grinding wheels + B-axis fine adjustment Country of origin: CH Voltage: 3x400V Dimensions: 3680x2165x2100 mm Rodpszbaz Aofx Ab Escd Net machine weight: 5500 kg TECHNICAL SPECIFICATIONS Center height: 175 mm Distance between centers: 650 mm LONGITUDINAL SLIDE (Z) Maximum travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm TRANSVERSE SLIDE (X) Maximum travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum weight of workpiece clamped between centers: 80 kg TAILSTOCK Taper: Morse 3 Sleeve: Ø 50 mm Sleeve travel: 35 mm UNIVERSAL GRINDING WHEEL HEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Grinding wheel head power: 12.5 kW Rotation speed: 3,200 min-1 Programmable cutting speed up to: 50 m/s B-axis travel: -15 to +195° B-axis indexing accuracy: 0.0001 ° LEFT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001 ° RIGHT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Subject to errors and omissions, the technical specifications are provided without commitment. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanical, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings + adjustment. New paint. Workpiece head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of belts. New spindle bearings. New paint. Tailstock Disassembled, inspected, overhauled Hydraulics Disassembly, motor check, replacement of pipes, defective and worn parts. Check the hydraulic block. X-axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of the hydraulic piston, re-grinding of the tables. Z-axis Disassembly, re-grinding of the tables, replacement of worn and defective parts, overhaul of the hydraulic piston, new paint. Electrical cabinet Complete check, replacement of various relays. Paint Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm Rcodpfx Aeylmmmeb Eod • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics®: Refurbished industrial robot. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Rodpfxep T Umqj Ab Escd Controller: R-30iA Payload: 260 kg Reach: 3.1 m General purpose: Heavy-duty, long-reach robot Robot mass: 1800 kg Delivery time: To be agreed upon mutually IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our core business is the reliable delivery of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide!

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Redpfxjyt Hc Do Ab Eocd Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length Rcodpextbf Esfx Ab Ejd 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm Rcsdsmidyispfx Ab Esd - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg