Used Painting Line for sale (13,696)

Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Dcsdpe Afpiyjfx Ab Aep

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Dcodsxw Ux Hjpfx Ab Aop Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Dcodsz Rnu Tjpfx Ab Asp Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE . Dedpfsy Uk A Sox Ab Ajcp

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections. Dedez Azx Rjpfx Ab Aocp

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. Djdpfx Ajywaqqsb Ajcp The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Dcedpfx Aozhblnsb Aop Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Dcsdetxnp Njpfx Ab Aop

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Dedpfxjzylxij Ab Aocp Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. Dodpfx Abez Ix Azj Ascp The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line Dcsdjzgayuspfx Ab Ajp This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: used, The painting line consists of the following elements: Dedpsyy Rivsfx Ab Ascp 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Dcodpfxozuzg Sj Ab Aep Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps Dodpfeyx Sv Uex Ab Ascp 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Dodpfx Abjit Rrvo Aocp

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Dsdpfxeivur Ae Ab Aocp 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Dcodpfezuzt Esx Ab Aop Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3 Djdpfx Abehyty As Ascp

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure Dcodpfx Abshbyr Se Aep f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Dcodpfx Abjyzw Hwe Ajp Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: excellent (used), Year of construction: 2015, Brand: Makor Type: Robospray Twin Dcodpfxsiu Hbne Ab Aop Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Dimension W: 4600 mm Dimension H: 4500 mm Includes - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes Dcodpfszf N Niox Ab Aop 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : Dedpfx Abehtlw Re Ajcp - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) Dcodpfx Aeyv Hzgsb Aep *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs Dodpsvw Egrefx Ab Ascp 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition