Used Ink Mixing System for sale (38,025)

Condition: used, Year of construction: 2013, functionality: fully functional, Rubber solution mixing unit with compact agitator and inline mixer for free-flowing rubber-toluene mixtures or ther liquids. Gtedpsyhpa Usfx Afneu ATEX certified Version EX II 1/2G c IIB T3 Inline mixer with thermo-siphon system Type 450LS Silverson Mixing output (water): 25.000 l/h Motor speed: 3000 rpm Compact agitator Type ARW-2081 (EX) Motor speed: 129 rpm Agitator shift diameter: 30 mm Measurements Measurements (LxWxH): 1800 x 1000 x 1710 mm Weight approx.: 1320 kg

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Gsdpfxowrhwzo Afnotu

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Gjdpfxjwfg E Do Afnstu

Year of construction: 2016, condition: ready for operation (used), A mixing system for mixing pre-packed individual products (flowpacks) for manual filling or packaging lines is available. Components: Scales, bucket elevators, conveyor chutes and a platform. Mixing components: 2x6 (12), cycle output: 2x40 (80), discharge points: Bucket elevators, bucket elevator positions: 4, total system dimensions X/Y/Z: approx. 22850mm/7200mm/4750mm, total system weight: approx. 7600kg. 1) 2x high-performance combination weigher HD-Wiegetechnik MultiWeigh, cycle capacity: 45/min, weighing range: 1000g/discharge, discharge volume: 3500cm³, weighing system: 2-beam strain gauge, resolution: 0.5g, machine dimensions X/Y/Z: approx. 2200mm/2200mm/2100mm, weight: approx. 1350kg. 2) 2x Pendelbecherwerke Wiese Förderelemente GmbH, conveying medium: rubber chains with buckets. 3) Walk-on platform (platform) Wiggenhauser, material: S235JR, max. deformation: 4.2mm, load capacity of scales: 1720kg, load capacity of platforms: 11550kg. This is a complete system with central switch cabinet. Documentation available. On-site inspection is possible. Expected to be available from summer (approx. August) 2026. Gjdow A R Tgopfx Afnstu

Year of construction: 2018, condition: ready for operation (used), A vacuum butterfly mixer with container is available. Mixer: lifting height: 650mm, butterfly agitator inserts: 3, butterfly speed: 72-720rpm, scraper arm speed: 17rpm, control: Siemens Sinatic HMI, dimensions X/Y/Z: approx. 1360mm/2650mm/2450mm, weight: approx. 2400kg. Tank: mixing chamber volume: 100l, mixing chamber pressure: 0bar-1bar, heating/cooling chamber volume: 13l, heating/cooling chamber pressure: 3bar, tank jacket operating temperature min./max.: 15°C/150°C, max. bearing and seal operating temperature: 130°C. Gtjdpfx Ajtq U Ddsfneu

Year of construction: 1992, condition: ready for operation (used), A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Gtjdexqgxxepfx Afnju

Year of construction: 2009, condition: ready for operation (used), Capacity: 800l, power: 110kW, mixing chamber material: stainless steel, speed: 475rpm, dimensions X/Y/Z: 2800mm/1800mm/2500mm, weight: approx. 3600kg. Gtsdpstqnuqsfx Afneu

Year of construction: 2017, condition: like new (used), functionality: fully functional, Growing media mixing system consisting of: - 5 x 18m3 feed hoppers; - Screening set consisting of two screens (fine and coarse); - 1 x 10m3 dosing hopper with internal reel; - Dosing system consisting of 5 fertilizer dosers equipped with a weighing system; - 1 x rotary screen for the finished product; - 3 x 25m3 finished product collection hoppers. The system includes connection conveyors and a main electrical control panel. Godpfeyg Eb Eox Afnstu Dismantling, assembly, and transportation are the responsibility of the purchaser.

Condition: excellent (used), Year of construction: 2003, Piovan material dosing unit colouring station Type Model: MDT 14 -- 1MD 1840 Specification: PA 58D /54S M Year of construction: 2003 volumetric dosing capacity: 0,1 to 3,2 kg./h hopper volume: 15 ltr. 2 separate dyeing stations + 1 main hopper tested for functionality before dismantling Gtsdpfjhupq Eex Afnsu available immediately in our warehouse Hannover /Germany

Condition: new, Year of construction: 2024, The Hight Speed Mixer SPT-SHM series are used to mix dry powder for tablets and capsules and can be also used for wet granulation Gjdpjh Im D Tsfx Afnotu (pre-stage to tablet and capsule powder). All product touching parts are made out of SS 316L steel. Others are out of SS 304. The machines are conform to GMP standards and CE certificated. The output of the machine depends on the product.

Condition: like new (used), Good working condition. Please check out our other listings as well. Gjdpfxsimwxwo Afnjtu

Condition: used, Name: Used polymer mixing system Manufacturer: Inter-Dos Type: Interflock 3-1000 Year built: Unknown Content: 1.000 liters Conveying / dosing of: Liquid polymers # Chamber: 3 Material: Polypropylene Gsdpfx Asxa Algsfnstu Driving force: 1: 0.75, 2: 0.55, 3: 0.55 kW Model: Horizontal Dimensions: L 2.100 x W 1.000 x H 1.600 mm Empty weight: Approx: 300 kg Technical doc.: Yes Condition: Second hand Price: By request

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Gsdpfx Aoq T N T Tsfnjtu Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) Godpfxjxyh E Sj Afnstu TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Extended feeder MB folding machine Gatefold pocket Delivery

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Feeders: KR497BW Conveyor: KR314-6 KR840RF Infeed Roller KR519F50 Vacuum Firejet, overall weight: 600 kg, type of input current: AC, input voltage: 230 V, input current: 230 A, total width: 820 mm, total length: 3,430 mm, total height: 845 mm, input frequency: 5,060 Hz, This envelope printer is for sale from the factory its in excellent working condition, ready to work, if necessary we can arrange try out on a scheduled meeting in Hungary, or we can do an online show off. Gjdpfx Aoxzfq Ujfnstu

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel vertical mixing vessel. Unit has a welded flat top and welded conical bottom. Unit measures approximately 1650mm diameter x 1800mm straight side. Unit has a top entry stainless steel offset (3) deck 3-blade pitched agitator driven by a 3kW motor. Unit is mounted on (3) legs. Specifications: Capacity: 792.5 gal Diameter: 5.41' Height: 5.91' Type of stainless: stainless steel Type Of Heads: Welded Flat Top, Welded Conical Bottom Gtodpeygvgrofx Afnju Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 Dimensions: 1650mm diameter x 1800mm straight side

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Film shrink system Manufacturer: Kuper Machine type: ST/I-1200 Machine number: 7560 Year of manufacture: 1991 Gedoyh Nd Dopfx Afnetu Connected load: approx. 51kW Working width: 1200mm We have recently dismantled this system. We are still in contact with the person who operated the machine. Documentation is included.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Gtsdpjxl Dxljfx Afnsu Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Gtjdpfxsx T Aqfo Afnou Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: excellent (used), Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. With its compact dimensions of 188 x 80 x 98 mm, the system can be easily installed in or on production lines. The printhead achieves top speeds of more than 180 m/min and has an IP65 protection rating. The printing system is equipped with a display for data entry, as well as for changing and reviewing system settings. Operators can review or change variable print information and settings directly on-site using the user-friendly display. Intuitive control is via an i-Logic button. Maintenance status can also be displayed on the display. The Integra One is particularly compact, measuring 188 x 80 x 98 mm, and was specifically designed for system integration. Smart Cartridge Monitoring The intelligent SmartCard cartridge monitoring system identifies the current ink type and automatically sets the appropriate ink parameters. The chip records and stores the current ink level and therefore detects opened cartridges. Thanks to the Click'n Print cartridge holder, changing ink is quick and easy. Maximum print speed (300 dpi horizontal) up to 180 m/min depending on configuration Horizontal print resolution adjustable from 50 to 900 dpi Vertical print resolution 300 or 600 dpi depending on configuration Maximum print height 12.5 mm Technology HP MK3 Authentication SmartCard Text field yes Counter yes (depending on configuration) Gtedpfx Ajq Tp Rmjfnou Time yes (depending on configuration) Date field/date offset yes (depending on configuration) Logo yes Variable input yes (depending on configuration) Action fields yes (depending on configuration) 1D code/2D code yes (depending on configuration) Data transfer via USB stick yes (USB-C) Ethernet yes (depending on configuration) Wi-Fi optional EIA232 yes Password levels yes (depending on configuration) Configurable inputs and outputs yes (depending on configuration) You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. Gjdpfotw Sk Uex Afnotu The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function. Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: excellent (used), Hugo Beck SL 412/25 Shrink tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulation fan Cooling fan 2 x control heating 1 x basic heating 1 x additional heating with chain transport Dimensions Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm You can find more items - new and used - in our store! Gtedop H T Iuopfx Afneu International shipping costs on request!

Year of construction: 2010, condition: like new (used), We sell: Gtedsgnguvopfx Afnju TOTAL WALTHER deluge system / sprinkler container with 13 fire fighting groups, Year of construction 2010, only short time in operation, as good as new. Plant is still completely installed, (incl. piping). The deluge system is automatically monitored for operational readiness. Monitoring centre make: TOTAL WALTHER; type: MZ382100; registration no.: G4860030. Number of monitoring contacts: 41 Fully functional On-site inspection possible at any time Offer price 2010: 161.422,-€ Further documents (technical data sheets, operating instructions, etc.) can be requested on request.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Gedpfx Afsv Nl A Ronotu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Godpfx Afsv Nl Dbenetu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.