Used Sawn for sale (76)

Condition: ready for operation (used), functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 - after technical inspection - very good condition - for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition power of feeder motor 1,5 kW length of feeder 4200 mm Fedper Ak Rgjfx Ad Nspp transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Fpsdpow S Eylsfx Ad Nsp

Condition: good (used), Year of construction: 2008, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. Fedpfx Asvlfbfjd Njpp Running on 100mm wide blades. tilting heads. Comes with 12 metre infeed and 8 metre outfeed. No cross transfer deck which is shown on video. Twin and single head deburring attachments also if required a systems TM auto stacker at extra cost, Nine complete new improved power feed rollers with sprockets and chain tension rollers for improved faster production. Also additional sawdust ports for added fire protection and some dust extraction trucking. All additions costing over 20k GBP. Comes with blades. Estimated production 36 m3 sawn per hr. This line new today would be over 650k GBP. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. Final agreed price offers in excess of £135.000 or approx 154,872.0 euros or ex rate at point of sale

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Fpjdpfx Asu R I A Hod Nep Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: new, Number of motors 2 Stück 0 2650 mm Control manuell Ruchser RU-GLS-ED 45° glazing bead saw ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Pos. 1.5 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros Fpedpfxsxmk Dqe Ad Nep Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: 576.00 euros ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!)

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Fodpexn T Smofx Ad Nopp Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost. Fjdpfx Aoxrg E Iod Nepp

Condition: new, overall weight: 22,000 kg, axle configuration: 2 axles, loading space length: 6,600 mm, Equipment: ABS, Internal number for customer inquiries: 2-149 ---!!! WORLD PREMIERE !!! PAVIC HTA 20 66Z Short Timber Trailer with OPTIPA SW Bunks. SW = Quick-Change. With this system, you can remove the OPTIPA AL10 telescopic stanchions within minutes, allowing for maximum flexibility! Ideal for round timber and sawn timber! The side stanchion storage is included! You benefit from the greatest flexibility the market has to offer! !!! AVAILABLE IMMEDIATELY !!! ---Choose your desired stanchion stripe color: red, green, blue, neon red, neon yellow, or black! Fpsdpfx Aexnn Snjd Nop 2-axle bolster trailer * 4x OPTIPA SW bolster frames (quick-change system with patented wedge technology) * 8x OPTIPA AL10 telescopic loading stanchions * Special tool for stanchion assembly and telescoping * Side aluminum box for stanchion storage (holds 4 units) * Optional: a larger aluminum box for storage of all 8 stanchions available for an additional charge * Chassis length approx. 6,600 mm * Front overhang approx. 710 mm (turntable) * Removable hooks on load bolsters for securing cargo * Payload 14,750 kg * Technical gross weight up to 22,000 kg * EBS / ABS * Air suspension with safety cables, leaf spring suspension available upon request * 2 x 10t SAF off-road axles * Turntable with double ball race, max. load 20 t * Front lifting rope * Wabco smartboard * Front signal light system, highly visible for max. airbag pressure indication * LED lighting * LED work lights * High-quality KTL coating – baked enamel finish included * Twin tires: 275/70 R 22.5 with branded tires on steel rims * Optional: ALCOA Dura-Bright aluminum rims available at extra cost Immediately available! Financing, leasing, or hire purchase available. Our sales team is happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, 1 Pair of Transport Rollers, Platform Trolleys, Transport Carts GORR Fpedpfxexcixlj Ad Njp Load capacity per roller: 1,000 kg Platform size per roller: 1050 x 255 mm Platform (support plate) thickness: 4 mm Overall height: 145 mm Roller diameter: 100 mm Roller width: 37 mm Load capacity per swivel castor: 300 kg - Each roller equipped with 4 swivel castors with white polyamide wheels, bolted to the support plate - Each roller is fitted with two castors with brakes - Steel support plate with reinforced edge serves as the platform surface Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per roller: 17 kg Net weight for both rollers: 34 kg Very good condition Price is per pair = 2 heavy-duty transport skates Scope of delivery: You will receive 2 of these universally and multi-purpose heavy-duty rollers. Currently, 50 pairs in stock. Both rollers together are fitted with 8 castors and can carry up to 2 tonnes in total. Our customers use them to transport squared timber, boards, planks, and sawn timber. Other users move beams, girders, and heavy pipes within the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machine skates, material dollies, or machinery transport units.

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers Fedpsu Agk Hofx Ad Nspp - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform swap body 7.45m GALVANIZED central lashing rings for sawn timber, etc. 28 lashing rings Lashing rail Craneable Load area: 7300 mm x 2480 mm 16,000 kg GVW Multiple units available Large stock of swap bodies and drawbar trailers! ##### PLEASE CALL – NO EMAILS! NATIONWIDE DELIVERY WITHIN GERMANY POSSIBLE! Fodoxuvq Ejpfx Ad Nspp MEPO Commercial Vehicles has been delivering since 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: new, Number of motors 2 Stück 0 2380 mm Control , RUCHSER RU-GL-45° ----- Glass bead saw on the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage Manually movable mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glazing bead saw 45° on RU-SA-3000 ----- for glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually mounted movably. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 1 set of carbide saw blades for for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 piece each Saw blade L1233 (left) and L1085 (right), with special grinding 43°. Additional price: 421.00 euros Pos. 1.2 Holding device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing beads Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Fsdpjxmkz Nsfx Ad Nopp Additional price: 428.00 euros Item 1.5 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.6 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros ----- Total price i...

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Fpsdpfx Aow Ec Rijd Nep Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: new, power: 382 kW (519.37 HP), overall weight: 33,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,540 mm, loading space length: 6,100 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 3-039 MAN TGS 33.520 6x4 BL Short Timber Platform Body with Quick-Change Stakes and Crane of Your Choice! Wheelbase: 3,900 mm IMMEDIATELY AVAILABLE FROM STOCK!! * EURO 6E!! * Cab Type TM: the Comfortable one (narrow, long, medium-height) * All-wheel drive 6x4 * Suspension type Leaf/Air (BL) * Main wheelbase 3,900 mm, 1,400 mm wheelbase between rear axles * MAN D2676 LF78 diesel engine, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic 12.28 OD automatic transmission with Retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * MAN EVBec high-performance engine brake, multi-stage * Differential lock on rear driven axles Fpsdpoxnn S Isfx Ad Nop * Trailer coupling at rear crossmember, RINGFEDER type 4040/G150B * MAN EasyControl operating panel, 4 functions, can be operated from outside with door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multifunction leather steering wheel, height and tilt adjustable * Lower bunk with slatted frame and adjustable headrest * Front windshield sun blind, interior, electric * Pull-out refrigerator and drawer * MAN SmartSelect infotainment control with touchpad and direct access * MAN Media System Navigation Professional 12.3-inch * MAN Advanced Sound System with subwoofer * Smartphone integration * and much more Bodywork: * Load length up to crane base 6,100 mm (Austria and South Tyrol special) * Platform dimensions: length approx. 5,700 mm, width 2,540 mm * Platform color: black * 8x OPTIPA ALU10 stakes with quick-change wedges, stakes can be removed at any time (for example, for transporting sawn timber, straw, hay, or silage) * Storage for stakes upright in front of the bulkhead * Gear racks between stake pockets * Lashing points in the external frame * Sturdy steel bulkhead * Extendable ladder at front and rear for access to the platform * Prepared for manual strap tensioners (Autonordic) or alternatively pneumatic (ExTe TU) * Stainless steel toolbox under the loading area Crane: Your choice of: - Palfinger Epsilon M12Z Classic 10.5 - Palfinger Epsilon Q150Z 9.6 - TajfunLIV 150Z 9.6 - TajfunLIB 150Z 9.6 cab-mounted crane Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise Fjdpfx Adexaa Uls Nspp - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: used, Year of construction: 2002, cutting diameter 260 mm dimensions of saw-band 4115 x 41 x 1,3 mm cutting range square 260 x 260 mm weight of the machine ca. 2,2 t Remaining piece length: 80 mm Smallest diameter that can be sawn: Ø 8 mm Smallest cut length: 8 mm Minimum remaining piece length, single cut: 30 mm Minimum residual piece length, automatic mode: 80 mm Maximum automatic material feed: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Belt speed: infinitely variable 15–125 m/min Cutting feed: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Fpodpfx Aexa Hk Tod Njp Equipment: Vibrating table Belt tension monitoring Roller conveyor 3500 mm(roller drive via hand wheel) with guide rollers roll width approx. 320 mm Chip conveyor Subject to errors in the technical data Translated with (free version)

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, Fedpfx Adjtqdvgo Nepp max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists.

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Fpsdpjvzt D Tjfx Ad Njp Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: new, functionality: fully functional, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, input frequency: 50 Hz, input voltage: 400 V, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Fsdpfx Adexd Si Ae Nopp Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: new, power: 382 kW (519.37 HP), overall weight: 33,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space length: 6,100 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 4-093---- MAN TGS 33.520 6x6 BL Short Timber Platform Body with Epsilon M12Z 10.5 Crane! Wheelbase: 3,900 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE FROM STOCK !! EURO 6E !! * TM cabin: the comfortable variant (narrow, long, medium-high) * All-wheel drive 6x6 Fodpoxnnucjfx Ad Nspp * Suspension type: leaf/air (BL) * Main wheelbase 3,900 mm, 1,400 mm distance between rear axles * Diesel engine MAN D2676 LF78, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic automatic transmission 12.28 OD, with Retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Differential locks front, rear, and centre on powered rear axles * ROCKINGER tow coupling type 500 G 6A (or 40mm by request) * MAN EasyControl panel, 4 functions, can be operated from outside with the door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multi-function steering wheel, leather, height and tilt adjustable * Lower bunk with slatted frame and adjustable head section * Sunblind for windshield, interior, electric * Pull-out refrigerator and drawer * MAN SmartSelect infotainment control with touchpad and direct access * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration Body: Loading length up to crane base 6100mm (Austria and South Tyrol special) * Platform has body dimensions approx. 5700mm length x 2540mm width * Platform color: Black * 8x OPTIPA ALU10 stakes with quick-change wedges, stakes can be removed at any time (for transport of sawn timber, straw, hay, or silage for example) * Stake holders upright in front of the front wall * Rack rails between pockets * Lashing points in the outer frame * Robust steel front wall * Extendable ladder at the front and rear for access to the platform * Preparation for manual strap tensioners (Autonordic) or alternatively Luftmann (ExTe TU) * Stainless steel toolbox under the loading area Crane: EPSILON M12Z105 FULLY HYDRAULIC LOG LOADER CRANE *max. outreach 10.50 m * Lifting moment 104 kNm * Slewing range 425° * High seat with 4 mechanical levers, 2 mechanical foot pedals * and much more. Financing / hire purchase, as well as leasing / partial amortisation leasing, is available with our leasing partner. If you have further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm Fpodpfjwfd Icjx Ad Nep If If you have more questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: Fpodoxc Hinjpfx Ad Nop - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min - Hydraulic lifting/lowering of saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm - Weight approx.: 2,800 kg

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor Fedpfx Aoxa Ettod Nspp - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Weinig H25 high-speed planer and moulder for four-sided planing and profiling of wet wood (Freshly sawn) The pictures show the current condition of the machine. Among other things, some original Weinig new parts were installed, and the tables/stops were sanded and recoated. Further new parts are required for completion. These will be ordered on a case-by-case basis, taking customer requirements into account. The control panel is for testing purposes and is temporary. working width: 250 mm working height: 160 mm spindles: 5 Fodpfx Aew R S T Aod Nepp Spindles: 5 spindle 1: Bottom (7.5 kW) spindle 2: Right (11 kW) spindle 3: Left (11 kW) spindle 4: Top (15 kW) spindle 5: Below (tba) feed: 15 kW, hydraulic control: ATS system Driven table rollers: Yes Table tops: Sanded and recoated (hardened) Powered table rollers: Yes

Condition: new, 1 brand new horizontal band saw machine with double miter Brand: HUVEMA / BEKA-MAK, Origin Türkiye Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 760 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power Coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: Fodpefk Ew Eofx Ad Nopp • Mitering on both sides using a swivel frame o The material to be sawn remains straight in the room! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Quick-release vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Limit switch at end of cut • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel