Used Mori Seiki M 300 for sale (172)

Condition: used, BAZ Mori Seiki NV 5000A/40 is available for sale. The machine can be inspected under power at any time. Bdedpfexywwwex Abbek

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,691 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes Travel path X-axis: 560 mm Travel path Y-axis: 560 mm Travel path Z-axis: 630 mm B-axis max. rotational speed: 44.4 rpm Rapid Traverse Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to top of pallet: 80–640 mm Distance spindle nose to center of pallet: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Bjdpfx Aoxvzt Isbbedk Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Bdjdpfx Ajxuaxmjbbek Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA 15 bar pump with filter This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Bdsdpoxph Raofx Abbok

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: Bdodpfx Abexr Rbyjbsk - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Bdedpew H Dnfsfx Abbek Many tool-holders and live-tools included Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Turret type: 12 stations Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis (mm): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø500 Maximum table load capacity (kg): 300 Cutting feed rate (mm/min, X/Y/Z): 50,000 / 50,000 / 40,000 Maximum rapid traverse (m/min, X/Y/Z): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool changer positions: 122 Maximum tool diameter (mm): 90 Maximum tool diameter with adjacent positions empty (mm): 125 Maximum tool length (mm): 300 Maximum tool weight (kg): 8 Coolant tank capacity (L): 750 INCLUDED EQUIPMENT Rotary table with digital readouts Coolant through spindle Electronic handwheel integrated on CNC panel Bodpfx Aewv Sgusbbsdk Main benefits of the included FANUC options: - Enhanced control power and stability: Enables simultaneous management of all 5 real axes with complete smoothness and precision, maintaining performance even during complex machining operations. - Expanded memory and advanced program management: Capacity to store up to 1,000 programs, ideal for production environments with multiple references or short series. - Custom interpolations and macros: Facilitate the programming of special paths, automatic cycles, and subroutines tailored to operator requirements, reducing setup times and errors. - High-speed processing and maximum precision: Optimized FANUC control provides smoother movements, reduced vibration, and increased dimensional accuracy, especially in simultaneous 5-axis machining. - Full compatibility with automation systems: The system is ready for use with EROWA or other automatic changer systems; easily integrates into automated lines or robot cells. MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 280 x 785 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] * Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Distance between centers : 705 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] Bodpfx Absxxb Tysbsdk - Number of hours under power : 24151 [h] - Number of working hours : 5144 [h] WEIGHT & DIMENSIONS - Machine floor space : 3800 x 2143 [mm] - Machine height : 2232 [mm] - Machine weight : 6100 [kg] EQUIPMENT - CNC : MORI MSX-850 III (Mitsubishi 720BM) - Tool probe - 3 colors status lamp - Coolant tank - Chips conveyor - Parts catcher - Predisposition for barfeeder - Chuck 3 jaws : hydraulique - Number of turning tool holders : 5

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,000 h, Control Unit Brand FANUC Model MSX-701 IV This MORI SEIKI NZ1500 was manufactured in 2010. It features an MSX-701 IV control system, dual spindles with a maximum speed of 6000 rpm, and two turrets with capacities of 16 positions each. The machine includes a bar feeder for materials up to 1200 mm and a high-pressure coolant system with a 500-liter tank. Consider the opportunity to buy this MORI SEIKI NZ1500 turn-mill centre. Contact us for more information about this machine. Application Types Turning Bdedpfoxtgl Rox Abbek

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,5 x 2,8 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - storage 1 MB - Big Plus spindle - Knoll filter system - mechanical Oil dust collector Bodpfxjwi Ibus Abbsdk - elect. hand wheel - renishaw - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: used, Year of construction: 1999, swing dia. 680 mm Bdsdpfx Aowplulsbbok max. turning diameter 429 mm turning length 440 mm control MORI SEIKI - MSC-501 turning speeds 5.000 U/min max. bar material dia. 56 mm travel -x axis 233 mm travel -z axis 510 mm number of tapers in turret head 2x12 CNC Turning- and Milling Center | MORI SEIKI - ZL-150SMC equipped with main/counter spindle, c- axis, 2x turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZL 150SMC | ZL150SMC | ZL-150 SMC | ZL 150 SMC

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller model: Siemens 840D, total height: 3,264 mm, total length: 2,691 mm, total width: 3,965 mm, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 35,000 h, spindle nose: HSK A 63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 80 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Mori Seiki NMV5000 DCG is a true powerhouse, and we have taken it directly from production, fully operational, from our client (see video). Additional specifications: Max. workpiece weight on table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode): 0 - 1200 min-1 Table rotation speed (standard): 0 - 120 min-1 Max. tool diameter: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Bsdpfexgd Hxox Abbodk Coolant tank capacity: 750L Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Includes: Original Mori Seiki tool block. KNOLL FKA/500 belt filter system + 3 filter rolls. Filtermist FX5000 emulsion mist extractor. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original documentation + electrical diagrams. Photos were taken during disassembly at every stage and will be provided after purchase to assist with installation on site.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper Bdedpfx Ajxfka Nsbbek High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 400 mm, turning diameter: 370 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 20,000 rpm, bar passage: 65 mm, total height: 2,670 mm, total length: 3,810 mm, chuck outer diameter: 200 mm, total width: 2,900 mm, bar diameter (max.): 65 mm, spindle nose: Capto C5, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, 🔹 For Sale: 2010 Mori Seiki NT1000SZM Mill Turn Centre – Excellent Condition – Ireland 🔹 Make: Mori Seiki Model: NT1000SZM Year: 2010 Control: MSX-711IV Machine Type: CNC Mill Turn Centre (Tool Spindle, Main Spindle, Sub Spindle, Lower Turret) Condition: Excellent Location: Ireland Availability: Immediate 📌 Description: Available for sale is a Mori Seiki NT1000SZM Mill Turn Centre, a premium multi-tasking CNC machine in excellent condition with only 16,520 cutting hours. Featuring a high-speed 20,000 rpm milling spindle, dual spindles, lower turret, and simultaneous 5-axis capability, this machine is ideal for advanced and precise mill-turn operations in the aerospace, medical, and high-precision engineering sectors. This machine is comprehensively equipped and designed to handle complex, multi-sided machining with reduced setups and high throughput. Bdedpfx Abstwyc Sobek High-spec 5-axis Mori Seiki NT1000SZM Mill Turn Centre with 20,000rpm spindle, sub spindle & turret. In excellent condition. 🧰 Included Equipment: Kitagawa 5" Chuck (Sub Spindle) Kitagawa 8" Hollow Chuck (Main Spindle) Full Selection of Tool Holders (as seen in videos) Swarf Conveyor 70 Bar High Pressure Coolant System Air Blow for Main Chuck and Tool Tip Tool Presetter (Tool Spindle & Turret 2) Workpiece Conveyor (Bar Feeder Spec) Bar Feed Interface Tool and Workpiece Counters Signal Tower Double Foot Switch for Both Spindles Part Program Storage (1MB) with 1000 Registerable Programs Knoll Compact Filter Unit Double-Wound Transformer 🔧 Technical Specifications: 🔹 Turning Capacity: Max Turning Diameter: 370 mm Max Turning Length: 400 mm Bar Work Capacity: 65 mm Main Spindle Through-Hole: 73 mm 🔹 Spindles: Main Spindle Speed: Up to 6,000 rpm Sub Spindle Included Spindle Drive Motor: 11/7.5 kW 🔹 Milling Tool Spindle: Max Speed: 20,000 rpm Taper: Capto C5 Tool Spindle Drive Motor: 9/5.5 kW X Axis Travel: 380 mm Y Axis Travel: 210 mm Z Axis Travel: 480 mm B Axis Tilt: ±120° C Axis: 360° 🔹 Tooling System: ATC Capacity: 76 Tools Max Tool Diameter: 130 mm Max Tool Weight: 5 kg 🔹 Dimensions & Weight: Machine Dimensions: 3810 x 2895 x 2670 mm Machine Weight: 8,500 kg ✅ Highlights: Advanced 5-Axis Mill-Turn with B-Axis Head Powerful and Flexible Dual-Spindle Configuration High-Speed Tool Spindle (20,000 rpm) with Capto C5 Fully tooled with coolant system, filters, tool holders, and more In-machine tool setting and bar feed ready Ideal for high-precision, high-complexity parts 📈 Perfect For: Aerospace machining Medical device manufacturing Precision mechanical components High-mix, low-volume or complex geometry parts CNC Mill Turn for Sale Ireland, Used Mori Seiki NT1000SZM, 5-Axis CNC Turning Centre, High-Speed Milling Lathe, CNC Machine with Sub Spindle and B Axis, Capto C5 Mill Turn, Precision Mill Turn Centre for Sale, Dual Spindle CNC Lathe with Milling

Condition: like new (used), Year of construction: 2008, operating hours: 1,900 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: €20,000–25,000. * Year of manufacture: 2008. * Only 1,900 cutting hours. * 5-axis machine. * Sub-spindle. * 12-station turret, all stations powered (live tooling). * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Sub-spindle integrated motor: 15 kW. * Direct drive for live tools: 5.5 kW. Bdjdox Ab R Topfx Abbsk * Spindle start-up torque: 640 Nm. * Beltless, step-less drive motors. * Main spindle nose size: A2-8. * Sub-spindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Sub-spindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Live tool speed: 6,000 rpm. * Daikin oil chiller for both spindles. * Conversational automatic programming system: Mapps 4. * Automatic overload control and tool consumption monitoring. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw automatic tool measurement arms. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening and closing of main and sub-spindle chucks. * Side-mounted hinged belt chip conveyor. * Comprehensive set of static and powered toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operations manual included. * Machine weight: 5,800 kg. * Machine currently in operation. * Essential to check precision and demonstration videos. * Only aluminum components machined. * Cutting hours: 1,900. * Immediate delivery unless sold beforehand.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1730 Measurements depth 2110 Measurements height 1820 Machine weight 4500 Main Drive Spindle speed range 45 - 4500 Spindle motor power 11 kW Movement X-Axis Movement 235 mm Bjdjxpkl Tepfx Abbsdk Z-Axis Movement 520 mm Workpiece Workpiece drm 390 mm Additional Equipment Hinged belt chip conveyor Some accessories would also be included (see photos) This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe. Application Types Turning

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: Bjdpfx Abjxzqhrebjdk - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Bsdpjwxahfefx Abbsdk Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: excellent (used), Year of construction: 2001, TECHNICAL DETAILS Description CNC Control: MSG-501 X axis travel (mm): 560 Y axis travel (mm): 510 Z axis travel (mm): 510 Bdedpfew A Nwkjx Abbek B axis (mm): 360 x 1º Pallet size: 400 x 400 mm Table load capacity (kg): 500 Number of pallets: 3 Cutting feedrate X, Y, Z (mm/min): 40,000 Max rapid traverse X, Y, Z (m/min): 40 / 40 / 40 Spindle speed (rpm): 10,000 Spindle power (kW): - Taper type: BT-40 Torque (Nm): - Tool changer type: MATRIX Positions in tool changer: 40 Max tool diameter (mm): - Max diameter with vacant positions: - Max tool length (mm): - Max tool weight (kg): - Coolant tank capacity (l): - Through spindle coolant (bar): Yes EQUIPMENT Chip conveyor BT-40 taper Through spindle coolant Machine Dimensions Length (mm): 3,200 Width (mm): 2,250 Height (mm): 2,830 Weight (kg): 8,900

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Bodsw Rrzaspfx Abbedk Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2009, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: €40,000–45,000. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Opposed-spindle machine configuration. * 9-axis turning and milling center with CNC control. * Twin spindles. * Spindle size: A2-6. * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic load control and tool consumption monitoring. * Tool life management and consumption monitoring. * Double foot pedal for chuck open/close operation. * Oil chiller for both spindles. * Cutting torque: 340 Nm. * Both turrets feature 16 stations each, all stations driven. * Possibility to set up with up to 32 tools per turret. * Interface for bar feeder installation. * Rear automatic parts catcher with special gripper for long workpieces. * Large set of external and internal toolholders. * Large assortment of axial and radial driven tool blocks. * MQ tool clamping system. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III CNC control. * Maximum distance between main and sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Maximum bar capacity: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Hinged belt side chip conveyor. Bjdpsx Ab Nisfx Abbodk * Communication ports: USB, PCMCIA card, RS232. * Machine weight: 8,300 kg. * Inspections under power possible. * Supplied with electrical transformer, documentation, parts list, electrical diagrams, programming and operation manuals. * IMPORTANT: Never used with bar feeder; only used for machining aluminum prototypes. * VERY few cutting hours. * Immediate delivery unless sold prior.

Condition: ready for operation (used), Year of construction: 2006, General Data Bdsdpfxsxya Dgs Abbjk Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Tool taper 7/24 Taper No. 40 Number of axis 4 Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Bsdpfx Ajxfv E Djbbodk CNC control: MSG-501 Axis X mm: 215 Axis Z mm: 490 Axis Y mm: +40 / -30 Maximum turning diameter mm: C-Axis increment: 0.001° Maximum turning length mm: 510 Cutting feedrate mm/min X, Z, Y: - Swing over bed mm: Ø 300 Swing over cross slide mm: Ø Bar capacity mm: Ø 56 Max. rapid traverse X, Z m/min: 24 Main Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Main spindle bore: - Main spindle nose: A2-5 Sub-Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Sub-spindle bore: - Sub-spindle nose: A2-5 Turret positions: 12 Number of powered tool stations: 12 Powered tool speed rpm: 6,000 Powered tool power kW: 5.5 EQUIPMENT Chip conveyor Bar feeder: LNS Quick Load Servo II Overhead gantry loader. CNC control system: MSG-501 (Fanuc) Set of fixed and powered tool holders 3-color status light Bar feeder interface Manuals MACHINE DIMENSIONS Length mm: 2,705 Width mm: 2,000 Height mm: 2,120 Weight kg: 5,800

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis Indexing Increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate X, Z, Y: - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main spindle) Bedpfewdrfgsx Abbsdk - Max. Rapid Traverse X, Z: - Main Spindle 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque: - Main Spindle Bore: mm - Main Spindle Nose: A2-6 - Sub-Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque: - Sub-Spindle Bore: mm - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status light - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Bjdpfxoxqxzrj Abbedk CNC Control: Mori Seiki MSX 501III (FANUC) X travel (mm): 800 Y travel (mm): 510 Z travel (mm): 460 Table size (mm): 1,320 x 600 Maximum table load (kg): 1,000 Cutting feed (mm/min X,Y,Z): 1 – 20,000 Rapid traverse max. (m/min X, Y, Z): 30, 30, 24 Spindle speed (rpm): 20,000 Spindle power (kW): 18.50 Taper type: BT-40 Torque (Nm): - Magazine type: RANDOM Magazine positions: 30 Max. tool diameter (mm): 76 Max. tool diameter with adjacent pockets empty (mm): 127 Max. tool length (mm): 250 Max. tool weight (kg): 7 Coolant tank capacity (l): 200 Through-spindle coolant (bar): Yes INCLUDED EQUIPMENT: Chip conveyor Through-spindle coolant with high-pressure pump Tool breakage detection probe 4th axis NIKKEN Workpiece probing system Tool measurement probe MACHINE DIMENSIONS Length (mm): 4,308 Width (mm): 4,068 Height (mm): 2,940 Weight (kg): 7,200