Horizontal machining center

mori seiki SH50

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Podpfx Alszcuyijtjpu Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Ppodpexvw I Iofx Altju Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, Ppedpfx Alowix Hhetsu *

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t Ppodpexrwpdjfx Altou dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... Psdpfjwix E Rjx Altopu *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Pjdpfxjykpg Hj Altepu Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Ppodex Ad Nlopfx Altju Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior agreement. Matrix NEXUS 2 – control system Pallets: 2x YES. Chip conveyor: Yes. ATC: YES. High pressure 70 Bar. Spindle operating time: 10,125 hours. Ppsdpfx Ajy Rgcyslteu • Total power-on hours: 32,348 hours. Pallet size: 630 × 630 mm. Number of pallets: 2. Max. workpiece dimensions: Ø 1050 × 1300 mm. Max. pallet load: 1,500 kg. Travel X: 1,050 mm. Travel Y: 900 mm. Travel Z: 980 mm. 4th axis: Yes (NC rotary table). Spindle taper: BT50 / CAT50. Spindle speed: 8,000 rpm (standard), optionally 10,000 rpm. Spindle power: approx. 37 kW. Tool magazine: 40–120 positions. Control system: Mazatrol Matrix Nexus 2. Type of operation: Serial production machining. Typical applications: Housings, cast iron, steel, automotive. Machine weight: approx. 20–22 t. Automatic pallet changer: Yes.

Condition: good (used), Year of construction: 2005, MACHINE SPECIFICATIONS CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º index) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-50 Psdpfxexq Hcwj Altopu Tool magazine slots: SK50 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, Ppjdpfx Asxf T Txeltou we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Please refer to the attached file for details.