Used Maho Mh 300 C for sale (422)

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center, brand Maho, type 300 C. The power supply has a defect, but this can be repaired. Technical data: Year of manufacture: 1987 Type: MH 300 C Chedpfx Adsir U H Ej Ioc CNC control: Phillips 432 Table: 550x275 mm Travel distances x/y/z: 300/350/220 mm Spindle taper: SK 40 Spindle speed: 20-4000 rpm Main drive: 3.3 kW Rapid traverse rate: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Chedpfxstvct Hj Ad Iec

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center. Codpfjzgcifox Ad Ijhc

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Chedpsq T T Npefx Ad Ioc -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 7.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Chodpfjldgf Hsx Ad Ioc

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm -Weight: 7.7 kg Chedoq T T I Dspfx Ad Isc

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Chjdpfx Asx Dw Iwsd Iec

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Chjdpex Dw Iqsfx Ad Isc

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 450 mm Chsdpfx Aew Inr Asd Iec z-travel 450 mm spindle turning speed range 20 - 6300 U/min Number of tools 30 St. tool taper SK 40 total power requirement 17 kW weight of the machine ca. 4 t dimensions of the machine ca. 3,2 x 3,4 x 2,2 m

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Chsdsz Ixk Sjpfx Ad Ijc Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex-works: Tool milling machine MAHO Type MH 500 M Year of manufacture 1989 Heidenhain digital display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill travel 50 mm Travel distances X/Y/Z 500/380/350 mm Drive 3 kW Feeds 10 – 1000 mm/min Coolant system Weight 1600 kg Accessories: Chedpfx Ajz Ixlcsd Isc Hydraulic vice Price: Euro 2,500.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm z-axis: 200 mm Csdpfx Adsd Tfcis Iohc spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm Cedpfsurcybox Ad Ijhc with work area enclosure Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Chsdoy Hizqepfx Ad Iec Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: used, Year of construction: 2010, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D 3D ShopMill Siemens turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Cjdpfx Adoz I Dy Eo Ishc max. tool length 300 mm change time 1,6 sec change-time chip to chip 7,0 sec rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours - only 13,700 power-on hours

Condition: excellent (used), Year of construction: 1996, Maho MH 700 M Tool milling machine Deckel Maho MH 700 M with Heidenhain TNC 116 control, built in 1996, in SUPER condition. From the testing department of Castwerk Technologies. CE compliant!! Technical data: Year of construction: 1996 Universal table Speed: stepless up to 5000 RPM Feed rate: stepless in 3 axes from 0 to 3000 mm/min Travel ranges X/Y/Z: 700/450/450 mm Cjdpfxsz Indns Ad Iehc Rapid traverse rates x/y/z: 5 / 5 / 4 m/min Table surface: 750 x 450 mm Table load: 450 kg Vertical quill stroke: 80 mm Vertical quill and horizontal quill - SK40 Hydraulic clamping system Weight approx. 3400 kg Space requirement approx.: 2.5 x 2 x 3 m Drive power: 12 KVA Accessories and equipment: Heidenhain TNC 116 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Deckel Maho MH 700 M with a Heidenhain TNC 116 control. This universal milling machine is in very good original condition. It comes from a company where it was only used to a limited extent for training purposes. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel Maho has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Deckel Maho on site under power. You can find more milling machines from renowned manufacturers on our website.

Year of construction: 1982, condition: good (used), machine/vehicle number: 75 810, table mounting size: 630 Ø mm movement x: 600 mm Chsdsby Hhtopfx Ad Iec movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand 80 mm spindle taper: ISO 40 spindle turning speed range: 20 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: 4 m/min electrical connection: 380 V kW space needed: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Condition: used, Year of construction: 1985, For sale: MAHO MH 1000C milling machine Factory number 11429 BKW GmbH model S.05ES Year of manufacture: 1985 18 bar, Vol. 1.6 m3/h; 3000 1/min; kW 0.36; 50/60 Hz; V 190-240; A 2.85 Chedszzw Tbepfx Ad Ioc Net price: 7000 Euro

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Cedpswkihxjfx Ad Iehc

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. Csdpfx Aju Idbyod Iehc max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Cedpfxjunwd To Ad Iehc Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Cedpfx Aerv Ta Rsd Ishc

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm Cedpfxoq T T Nwj Ad Iehc -Weight: 0.8 kg

Condition: ready for operation (used), Maho milling head from Maho 800 C, used, normal signs of use, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Cjdpfx Ajx Et Hnod Iohc

Condition: used, functionality: fully functional, For sale is a Deckel Maho MH 600 CNC milling machine with a Philips/Grundig CNC 532 control system. The machine comes from our own machinery stock and can be inspected on-site by appointment. This is a robust CNC milling machine from Deckel Maho with an enclosed work area and a large T-slot clamping table. Technical data / features: * Manufacturer: Deckel Maho * Model: MH 600 * CNC milling machine / machining center * Control system: Philips/Grundig CNC 532 * 3 CNC axes * Travel range X: approx. 600 mm * Travel range Y: approx. 450 mm * Travel range Z: approx. 450 mm * Tool holder: SK40 * Coolant system * Enclosed work area * T-slot clamping table Chodpfezwv Aasx Ad Ijc Important regarding the features: * No automatic tool changer * No chip conveyor * Tool changes are performed manually The Hilma machine vises shown in the photos are not included in the price. The machine is particularly suitable for single-part production, toolmaking, repair work, as well as small and medium-sized series. An inspection and demonstration can be arranged by appointment. Additional photos and information are available upon request. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.