CNC turning and milling center

Mori Seiki DL-151 MC

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Gjdpfx Aiotylazovjuh Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Guodou Rc Hmopfx Aivjh

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. Gjdpfx Ajtpu Szjivsuh - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut Gsdpfx Aokfvhkoivjuh - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] - Travel : 550 [mm] UPPER RIGHT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 245 x 520 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] LOWER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 210 x 520 [mm] Gjdpfxov R Hwfe Aivouh - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] POWER SUPPLY - Total installed power : 85 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5000 x 3500 [mm] - Machine height : 2500 [mm] - Machine weight : 9500 [kg] MACHINE HOURS - Number of working hours : 5811 [h] EQUIPMENT - CNC : Fanuc 31i-Model A - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 2 x 15 [bars] * with cooling unit for coolant - Chips conveyor : Droite - Parts catcher - Parts conveying strip - Bar loader : IRCO SIMAG 70.1 - Tool probe - Number of turning tool holders : Porte-outils radial x3 / Porte-outils axial x2 - Number of fixed tool holders : Voir photo - Collet chuck : 2 x HAINBUCH

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Gujdpjymmh Tofx Aivjh Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Cycle hours 7100 Timer

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 Gedpfx Aex R Emqsivouh spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -413

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -038 Guodpfox R Emwox Aivsh

Condition: used, Year of construction: 2005, A 2005 Built The Dah Lih MCV 720 Fanuc controlled VMC in lovely condition, super clean and well maintained…fitted with 4th axis unit, rear exiting swarf auger & mist extractor Make: Dah Lih Model: MCV 720 YOM 2005 Control Fanuc Series 0i Table Size (L x W) 950 mm x 560 mm (approx. 37.4 x 22.05 in) Axis Travel (X/Y/Z) 720 mm / 460 mm / 510 mm (approx. 28.3 / 18.1 / 20.1 in) Max. Table Load 500 kg (approx. 1100 lbs) Spindle Taper BT 40 Spindle Speed 8,000 RPM Gusdpexxv E Rofx Aivoh Spindle Motor Power 11 kW (15 hp) Automatic Tool Changer 24 Tool Side Mount Machine Weight Approx. 4400 kg (approx. 9680 lbs) Control: Fanuc 0iM Spec: Travel X720 Y460 Z510 mm | 8000RPM | BT40 Accessories: 4th axis unit, Mist Extractor, Swarf auger

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Gedpfoxni Iqjx Aivouh Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.