Used Milling Machine In Switzerland for sale (74,837)

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ Hfjdpeu Dahnofx Aagsg FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Hjdpfxor Hr Arj Aagjfg Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column Hodpfxsw U Tlzj Aagofg P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hfedpfx Aoy Egnlsagog Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information Hfsdpfxoy Idhho Aagjg In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm Hjdpfxoy Idfms Aagefg y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min Hodpfx Asy Iddpjagsfg main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, spindle diameter 102 mm x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm spindle taper ISO 50 bore spindle stroke 710 mm main drive motor 11 kW turning speeds 1600 U/min Feed 4000 mm/min Control Heidenhain type TNC 135 Hjdpfx Asyqvmasagefg T-slot - width 22 mm T-slot - distance 140 mm table surface area 1250x1400 mm Table load 2500 kg total power requirement 23 kW weight of the machine ca. 9,3 t Rotating table 360° The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Hfodsy Rakkspfx Aagjg if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Hfodpfjudb N Djx Aageg Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m Hjdpfxju Rfh Te Aagsfg

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Hfedoy Rxvlspfx Aagog

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min Hedpey N Du Dsfx Aagsfg - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: like new (used), Year of construction: 2021, operating hours: 6,133 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, total height: 1,800 mm, total length: 2,435 mm, total width: 1,875 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 4,500 rpm, overall weight: 1,970 kg, table load: 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine with high precision, long service life, and maximum operator comfort. Multi-ribbed cast construction ensures full operational performance throughout the entire working area. Control System SIEMENS 840D SL Path Control Working Area X / Y / Z 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Infinitely variable speed range 0 - 4500 rpm Digital Feed Infinitely adjustable feed on all axes. Feed range 0 - 2000 mm/min, infinitely variable Rapid traverse 5 m/min Handwheel resolution 2.5 mm (X / Y / Z axis) Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill incl. manual clamp, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – Standard Additionally, milling head is movable along Y-axis by 150 mm. For horizontal machining, the milling head does NOT need to be removed—simply slide it into its rear rest position. Fixed Angle Table Clamping surface 820 x 420 mm T-slots: 1 / 14 H7 reference slot 5 / 14 H12, 63 mm spacing Table load capacity: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable on all axes Main spindle motor with spindle speed brake function Oriented spindle stop; vertical and horizontal spindle for tapping cycles without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated scale rings on all axes Precision ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Control cabinet compactly integrated into machine Splash guard cabin with optimal, user-friendly access Safety glass window at the rear of the cabin Open at top—front and right doors, including sliding door at the front with safety interlock Interlocked when unpowered; additional service opening on left cabin side—bolted, removable Freestanding mobile coolant tank, 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel lamella cover for Z-axis guide protection Halogen machine lamp, 24V Easy-to-operate milling guard with plexiglass pane Hodpey R Tctefx Aagjfg Operator's manual, spare parts list, and electrical diagram in paper form Set of machine feet Transport bar and retaining rings for 2-strand lifting tackle Color: light gray RAL 7035 and telegray RAL 7045, fine texture Space Requirement – Connection Values Machine weight approx. 1970 kg Footprint (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. fuse protection: 35 A NH Network type: TN-S Connection type: fixed connection Further information available in the PDF attachment. The machine is supplied without tools and without accessories.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW Hfsdpfxsm Uygvj Aagsg dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1990, x-travel 0800 mm y-travel 550 mm z-travel 500 mm table-size 1000 x 630 mm feed range 0- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 Hfsdpfsyq Slxox Aageg turning speed range 20 - 4000 U/min main drive DC 10 kW CNC control Dialog 11 total power requirement 15 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area and tool change with 30 pos. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, Hedpfeyq Sk Usx Aagofg rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 400 mm z-travel 330 mm Hodey Nn Dvopfx Aagsfg weight of the machine ca. 2100 kg

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Hodpfxjy R Ebzo Aagefg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: used, Year of construction: 1984, spindle diameter 180 mm x-travel 1000 mm y-travel 1000 mm Control DIXI CNC 4400 total power requirement 47 kW Hfjdey Nfdgspfx Aagog weight of the machine ca. 17 t dimensions of the machine ca. 4835 x 2700 x 3190 m

Condition: used, Year of construction: 2007, x-travel 2.000 mm y-travel 800 mm z-travel 1.000 mm Control Heidenhain iTNC 530 spindle tunring speed 4.500 U/min tool taper SK 50 number of tool places 20 Pos. table surface area 2.000 x 700 mm max. table load 4.000 kg weight of the machine ca. 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hedpsy Nfbrsfx Aagefg Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm Hfsdjk Hdu Dopfx Aagjg z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Hsdpfxoygctre Aagjfg Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 Hfedpsy Sbkbefx Aageg dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min Hjdpfxoy Nnxas Aagofg rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant