Used Milling Machine In Switzerland for sale (84,196)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: SIEMENS 840D Solution Line (electrical overhaul in 2017) X-travel: 7,000 mm Y-travel: 2,100 mm Z-travel: 1,500 mm Z-travel (spindle in vertical position): 1,200 mm Feed rate X, Y, and Z axes: 2–12,000 mm/min Rapid traverse speed X, Y, and Z axes: 12,000 mm/min Universal milling head UFKSpindle speeds: 22 - 2,400 rpm Drive power 100 / 60 ED: 31.5 / 39 kW Max. torque main spindle: 2,200 Nm Swivel range of milling head (C axis): 180° Swivel range of milling head (A axis): 340° PREISELER AWU 650 automatic reversible clamping device Year of manufacture: 1995 with FORKARDT F630 vertical three-jaw chuck: 630 mm Center height above plate: 500 mm Max. workpiece weight (clamped in flight): 2,000 kg Max. workpiece weight (with counter bearing): 4,000 kg Counter bearing with hydraulic quill Tailstock quill taper: MK6 Tailstock center height: 500 mm Clamping plate Dimensions (LxWxH): 6,000 x 1,500 x 300 mm Max. load: 90 t T-slots: 6 pieces 28H7 (DIN650) T-slot spacing: 250 mm Coolant system with paper belt filter Manufacturer: ALLWEILER AG Type: PF 60 DVS / 500 Pump capacity at max. 3 bar: 40 l/min With recirculation unit Equipped with Automatic turning clamp with worm gear: PEISLER AWU650 Various roller blocks and supports6 UK500 machine clamping tablesMAYFRAN TYPE MT10 hinged belt conveyor SIEMENS SINUMERIK HT2 electronic handwheel Milling head design with hydromechanical rapid tool clamping Direct contactless measurement via linear measuring systems Ijdpfoxz Ecqsx Ag Dea Oil circulation lubrication for main gearbox and milling head drive Work platform traveling in X direction, protective cover with viewing windows The machine is in exceptionally good condition and can be viewed under power. In 2017, a new SIEMENS 840D Solution Line control system was installed, and all drive motors and the control cabinet were replaced.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Iodpfx Ageu Dahnj Dea Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a Iedjvxllkspfx Ag Dsa repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) Iedpfx Aoxz Aygog Dea * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: new, The Servomill® FPK 500 is a state-of-the-art Conventional Vertical Milling Machine from KNUTH, designed for superior performance in toolmaking and mechanical manufacturing. This versatile tool seamlessly integrates modern electronics, making it intuitive and capable of operating with exceptional precision. Its robust construction features a console design made of high-quality grey cast iron, ensuring durability and dimensional stability during operation. Noteworthy attributes include powerful servo feed technology with electronic handwheels, enabling infinite variability in feed speeds and precise control across all axes, accompanied by ball screws that eliminate backlash for enhanced accuracy. With a comprehensive variety of standard equipment such as a coolant system, LED worklight, and an automatic lubrication system, the Servomill addresses operational efficiency while minimizing maintenance needs. Perfect for both skilled operators and training environments, this machine exemplifies the best in modern milling technology. Whether you're looking to enhance your production capabilities or train the next generation of machinists, the Servomill® FPK 500 is an ideal choice. Request a quote today to elevate your milling operations with this advanced Conventional Vertical Milling Machine. Ijdpfjwa Ah Rox Ag Dsa

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Iedpfx Asw Nklhog Dja Good condition

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 Isdpfxsxz Eb Te Ag Dsa milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Iedjvrzv Eepfx Ag Doa Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min Ijdpfx Ajviyf Hsg Doa control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake Ijdexz Dkgspfx Ag Dsa - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: new, The FPK 4.3 is a powerful toolroom milling machine that belongs to the category of Conventional Vertical Milling Machines. This versatile tool-milling machine, renowned in tool and mold making, offers a compact design that combines flexibility with ease of use. The premium cast-iron machine column ensures maximum dynamic rigidity and constant precision, complemented by precision preloaded ball screws on all axes for enhanced performance. Operators will appreciate the ergonomically arranged controls and the swivelling control panel that, alongside the standard digital position indicator, provide maximum comfort. With a large work table measuring 400x800 mm and a travel capacity of 500 mm on the X-axis, the FPK 4.3 is perfect for diverse applications in both training and manufacturing environments. Additionally, it features an automatic feed on all axes with infinitely variable speed settings, and a rigid outer arbor for horizontal milling, making it robust yet precise. Explore the extensive accessory package and take advantage of KNUTH’s reputation for quality – order online today and elevate your workshop with this exceptional milling machine. Iedsuyh Dijpfx Ag Doa

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Ijdpfxjtrhq He Ag Dja Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Year of construction: 1965 X (mm): 1000 Y (mm): 600 Mounting (iso/mk): 4 Ijdpeq Ixz Refx Ag Dea Power (kw): 2

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Iedpfx Aoh U Nvkog Dea Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Worktable ----- 1320 x 320 mm Spindle intake vertical ----- ISO 40 Spindle take-up horizontal ----- ISO 40 Iedpfx Aorzuctjg Dsa Spindle speed vertical ----- 45 - 1660 rpm (11) Spindle speed horizontal ----- 40 - 1300 rpm (12) Displacement X ----- 1000 mm Displacement Y ----- 260 mm Traverse Z ----- 450 mm Distance vertical spindle - table ----- 220~670 mm Unloading ----- 200~760 mm Milling head rotatable ----- 360° Table feed X axis ----- 20~360 mm/min Table feed Y axis ----- 20~360 mm/min Iron feed Z axis ----- 400 mm/min T-slot ----- 14 mm Motor power ----- 3 KW / 400V Weight ----- 2100 KG INCLUDING * 3-axis digital readout SINO * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE hood * ISO40 collet holder including collets * Various tools

Condition: used, Used machine Year of manufacture: To be announced Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale at the front - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Dust extraction ports at top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction diameter: 150/120 mm - With 4-roller power feed unit Ijdpfxsxllw Ae Ag Dea Weight: 600 kg Availability: Short-term Location: Röllbach

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Iedpfxsqhkm So Ag Dsa

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) Iedpfxjxy Styo Ag Dsa - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Iodpfswwbkrex Ag Doa Application Types Milling

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Isdpfxsr Hr Are Ag Dea Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Ijdpew I U U Dsfx Ag Dja Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim

Condition: new, The UWF 5 is a state-of-the-art universal milling machine that falls under the category of Conventional Vertical Milling Machines and is part of the Universal Milling Machines product group. This top model in the UWF series boasts a large work area of 1325 x 360 mm and supports a table load capacity of up to 500 kg, making it ideal for both repair shops and production departments. Constructed with a robust machine bed from high-strength HT-200 cast iron and precision-ground guideways, it ensures long-term accuracy and wear resistance. The universal cutter head can swivel on two planes, allowing for quick changes between horizontal and vertical machining, while the powerful servo axis motor enables finely stepped motorized feeds in all axes. Additionally, the 5.5 kW main drive guarantees high torque, significantly enhancing productivity and offering features like a 3-axis position indicator and a user-friendly control panel. With extensive standard equipment, including a coolant system and tool storage, the UWF 5 is built for ease of use and maintenance-free operation. For those interested in enhancing their machining capabilities, request a quote for this impressive milling machine today. Ijdop Aucwopfx Ag Dea

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 355 NC Main Drive Spindle speed range 10 to 1600 Spindle bore 150 mm Number of axis 4 Movement X-Axis Movement 3000mm Y-Axis Movement 2000mm Y-Axis Rapid Traverse 7100 mm/min Iedpfjxzlu Hsx Ag Dsa Z-Axis Movement 1600mm Z-Axis Rapid Traverse 7100 mm/min W-Axis Movement 700mm W-Axis Rapid Traverse 7100 mm/min Tools Type of tool holder SK50 Clamping Unit Clamping force 25 kN This 4-axis UNION BFK 150/2 Bed Type Milling Machine was manufactured in 1991. It features a Heidenhain control system and SK50 tool holder, with travel distances of X=3000mm, Y=2000mm, Z=1600mm, and W=700mm. If you are looking to get high quality milling capabilities consider the UNION BFK 150/2 machine we have for tact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Iodouv Hrdspfx Ag Dsa Protection in the back and both lateral sides of the machine column.

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Ijdpfoxzlu Tjx Ag Dea Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling