Used Manual Polishing Machine for sale (73,240)

Condition: good (used), Used rotary indexing table polishing machine Nlsdpfoqmfv Sjx Acmoc Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: as good as new (ex-display), machine/vehicle number: PM1000_ERB, A polishing machine for robotic processing is being sold. Nedpsd Hh Txefx Acmjlc Manufacturer: SHL Polishing discs, diameter 1,000 mm Drive power: 5.5 kW

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Nsdpfxofiuguo Acmelc Drive power: 5.5 kW Polishing disc diameter: 1000 mm

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Nodpec Rfg Usfx Acmjlc Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high-pressure nozzles, 5.5 kW motors, Nsdeh Ug Uljpfx Acmslc control cabinet.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm Nedpfx Aodzqn Decmslc - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: ready for operation (used), Year of construction: 2008, A Rema wet grinding tube grinding machine is available. Motor power: 4kW, motor speed: 1450rpm, tube diameter range: 8mm-100mm, abrasive belt dimensions X/Y: 740mm/30mm. Documentation available. An on-site inspection is possible. Nodpfezcflpex Acmjlc

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Nljdodzqmhspfx Acmsc Weight 850 kg Good condition

Condition: used, CNC universal tool grinding machine SCHÜTTE, type BU 400 CNC 4 Machine – Defective – without control system Machine not operational – electrically non-functional – without CNC control Manufacturer’s No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Distance between centers (height) 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 volts, 50 Hz, 25 amps - CNC control system removed Space requirement L x W x H 3800 x 2400 x 2300 mm Nledpjd Rmcmjfx Acmsc Weight 3000 kg Machine not functional, CNC control system missing. Mechanically in good condition, ideal for retrofitting with a new control system Suitable as a source of spare parts or for rebuilding with a new control system

Year of construction: 2006, condition: excellent (used), Manual packaging machine. Nledoiz S Ifspfx Acmoc

Condition: used, Technical details: wheel diameter: 780 mm table height above floor: 800 mm Table dimensions: 890x190 mm grinding table: inclination: neigbar Grad total power requirement: ca. 2,0 kW weight of the machine ca.: 0,2 t space requirements of the machine approx.: L:1,2xB:1,05xH:1,3 m Double Disc Grinding Machine - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic Nledpfju Ng Rtox Acmjc - ginding disc surface diameter:680mm - grinding disc material: sand paper - sucction noozle: 80x120mm *

Condition: used, Technical details: grinding table: inclination: nein Grad voltage: 220 V machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Nledpfeu Ng Sqex Acmec Machine mounted on stand with base plate. Operation via on/off switch *

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Nledpfx Acoi Ezq Demjc Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Nljdpfsfibfgjx Acmjc Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Nedjwiv Dkepfx Acmjlc Weight kg 1500

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: Nlodpfx Asd Ab T Recmsc - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Year of construction: 1981, condition: used, machine/vehicle number: 1157, Very high-quality and precise polishing milling machine. Spindle speed: 750 ~ 3000 rpm Spindle length: 430 mm Spindle weight: 155 kg Voltage: 400V-3F Motor: 4 kW Compressed air: 6 bar, approx. 12 m3/h Work table: 600 x 450 mm Rapid traverse of work table: 5000 mm/min Feed of work table: 0 ~ 5000 mm/min, continuously adjustable Travel of work table: 700 mm Nlodpfsy Sid Ajx Acmjc Weight of work table: 100 kg Machine weight: 3800 kg Control cabinet weight: 800 kg Machine dimensions: L x W x H 2320 x 1200 x 1920 mm Control cabinet dimensions: L x W x H 2000 x 500 x 2100 mm Includes manual and parameters.

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Nledpfx Acoy Ud Dpsmsc Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h Weight kg 1200

Condition: used, functionality: fully functional, Polishing wheel Polishing disc diameter: 300 mm Width: 40 mm Nledpfxezccxao Acmec

Condition: like new (used), Year of construction: 2000, functionality: fully functional, ROSLER machine, force centrifuge with classification screen, can be seen in good working condition, speed 174 rpm, capacity 60 litres Nljdsxg Dgfjpfx Acmoc

Condition: good (used), Year of construction: 2001, Punching machine, Boschert EL300 Tooling system: AMADA Up to tool station D, diameter 88.9 mm New tool adapters for stations A/B/C Punching force: 280 kN (28 tons) Punching arm outreach: 350 mm Side stop: 500 mm, right/left Depth stop with digital display Nledpsdnny Rofx Acmsc Side stops: new Total weight: 2300 kg

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Kombi KS 1200 grinding head Njdpfx Asy Azb Uocmolc 1,000mm minimum grinding diameter Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Njdpfoum Ixxex Acmjlc

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Njdpfeyglkyox Acmjlc Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Nledjy Iu Ixepfx Acmsc Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors