Used Table Polishing Machine for sale (67,634)

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Fpsdsqmfv Sjpfx Aikop Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. Fodpfxew Au A Ej Aikspp The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm Fedpfjw Avptjx Aikjpp The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Fsdpfx Aolccvmoikepp Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Fsdoyntrhepfx Aikjpp Control cabinet. Three rotary table polishing machines are available.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 22735, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, height adjustment type: mechanical, Equipment: rotational speed infinitely variable, type plate available, ✨ 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine – Very Good Condition Boost your metal surface finishing with this 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine, now available in very good condition. Ideal for metalworking, fabrication, and polishing applications, this Italian-built machine delivers reliable high-speed performance, precision, and ease of use. The ZOE-L model is engineered for fast and efficient surface preparation of flat and tubular components, including stainless steel, aluminium, and other non-ferrous metals. ✅ Key Features – Ciclope ZOE-L (2017) Year of Manufacture: 2017 Condition: Very Good – fully functional Polishing Type: High-speed belt polishing (abrasive belt system) Workpiece Compatibility: Flat bars, tubes, and sheet metal Belt Speed: Adjustable high-speed performance Belt Width: 15 mm Belt Length: 610 mm Belt Speed: 600 - 3000 RPM Motor Power: 0.55 kW/0.75 HP Control Panel: Intuitive operator controls with safety stop Dust Extraction Port: Integrated for cleaner operation 🧰 Machine Capabilities Deburring and polishing of flat and curved metal surfaces Surface finishing on stainless steel and aluminium parts Ideal for preparing weld seams and smoothing edges Suitable for architectural, industrial, and decorative applications Rapid belt change system for increased productivity 📦 Included With Machine Ciclope ZOE-L polishing machine unit Safety guards and original electrical controls Integrated dust extraction connection 🏭 Ideal For: Stainless steel and aluminium fabricators Sheet metal processing and deburring Weld seam polishing in industrial production Architectural metal finishing Custom fabrication and surface prep workshops 🚚 Availability & Delivery This machine is in stock and ready for immediate inspection and delivery. We offer shipping across Ireland, UK and Europe. 📞 Enquire Today Looking for a high-performance belt polishing machine in excellent working order? Don’t miss this opportunity to own a Ciclope ZOE-L, trusted across Europe for its performance and durability. Ciclope ZOE-L polishing machine for sale Used high-speed belt polishing machine Fpjdpfjwwivvex Aikjp Industrial metal polishing equipment Deburring and polishing machine for stainless steel Belt sander for flat bar and tube finishing Surface finishing machine for aluminium and metal parts Ciclope finishing machine in very good condition Metal polishing equipment UK / Ireland / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Fpodsxxv D Hepfx Aikep If you have any further questions, please feel free to contact us!

Condition: good (used), Year of construction: 2008, Ref. -No.: 10649 Manufacturer: JUARISTI Type: TX1D Year of construction: 2008 Type of control: CNC Control: Heidenhain TNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 4000 mm Y-Travel: 2500 mm Z-Travel: 2000 mm B-Axis: 360 ° C-Axis: 0,005 ° Rotary Table (Lxw): 1600 x 3000 mm Fpodpfj Ahw N Ssx Aiksp Table Load: 4000 kg Tool Taper: SK50 Numbers Of Tools In Magazin: 100 Spindle Speed: 3500 RPM Drive Capacity - Spindle Motor: 25 kW Further information: - Weight limit for milling ⁓ 4000 kg - X-axis with rotary table and swivel head - 3 indexing tables, approx. 200 - Internal coolant supply (IKZ) is standard - Welding stand capable of welding and powder coating up to 6.3 t and 10 m in length with a 2 x 2.5 m cross-section The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 42, working width: 300 mm, passage height: 100 mm, brushing unit diameter: 250 mm, total length: 2,320 mm, total width: 740 mm, total height: 1,600 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, SP 300x3 Combined Sanding and Polishing Machine. Used for sanding wooden and wood-based components with flat and profiled surfaces, including laminate fronts. When fitted with polishing drums, it also performs polishing, and with rustical heads, it performs texturing (aging) of wood. The machine has a welded frame with three drive units on a movable base with adjustable height, an adjustable roller pressure, and a conveyor table with smooth feed rate adjustment. At the end of the line, there is a cleaning unit with a brush roller that removes dust from the processed components. Each drum is protected by an extraction hood, and the doors are secured with limit switches. Fpodo Aify Repfx Aikop Technical specifications: Sanding width: 300 mm Component thickness: 5–100 mm Number of spindles: 3, spindle diameter Ø40 x 373 mm Sanding drum: up to Ø250 x 300 mm Spindle speed: up to 1500 rpm, controlled by a frequency inverter Type of sanding: co-rotating and counter-rotating Spindle motor power: 3 kW Cleaning shaft: 160 x 320 mm, motor 0.37 kW Belt feed rate: 2–12 m/min, motor 0.75 kW Total power: 10.12 kW Power supply: 3 x 400 V + PE, 50 Hz, 24 V DC control Extraction requirement: 5000 m³/h Working height: 820 mm Dimensions (L x W x H): 2320 x 1050 x 1600 mm Weight: 900 kg Working tools (drums, rollers, heads) are not included in the machine and are available separately. The machine is fully functional and in good technical condition. It has not been heavily used.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Fpodjwqrltepfx Aikop Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Adjustable tool rests Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications Fpedpfoyk Dfwsx Aikop • Working width: approx. 1350 mm – suitable for wide fronts and panels. • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 19973, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2010 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2010) Year of Manufacture: 2010 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility Fpsdpfx Ajwqrgkeikop 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2019, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 379/2019, Equipment: KUKA KR 60 industrial robot (60 kg payload) with controller Fpjdpfx Ao Ah Edreikop 2 professional polishing units with frequency-inverter speed control and automatic polishing paste dosing 1 professional single grinding station with frequency-inverter speed control 1 professional double grinding station with frequency-inverter speed control 2 automatic loading tables, allowing parts to be loaded while the robot is working, for continuous, uninterrupted operation Control cabinet with frequency inverters, PLC control and speed regulation for all stations Enclosure with safety fencing Key advantages: Complete, integrated and programmed system, no integrator, programming or commissioning required 4 processing stations in a single cell All polishing and grinding units are professional-grade with individual frequency-inverter speed control Ideal for series production of sanitary fittings, faucets, handles, fittings, castings and other metal components Can be inspected in operation

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20224, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2011 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2011) Year of Manufacture: 2011 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping and setup support across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Fsdpfx Ajwqrhusikepp Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Polishing machine Manufacturer: BAUERRICHTER Type: SL1 1350X3500 Table size: 1400x4000 mm Working area: 1350x3500 mm Note: Fpjdjzuza Espfx Aiksp The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotary table diameter: 200 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Center from Mazak VCN 530C with Kitagawa MR200 table from 2018. Technical details: CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 Fjdpfj Aidzdex Aikopp and equipped, among other things, with - Chip conveyor belt left - Cooling by the spindle 15 bar - Kitagawa NC Rotary table MR 200 - Spindle total time 3.454 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 Fodpfx Aoz Aun Seikspp weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition, comes with complete documentation, and is ready for immediate use. The shot blasting machine features two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on the rotary table. The machine is equipped with two rotary tables. Diameter of each rotary table: 1400 mm. Maximum product height: 600 mm. Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range: Blasting wheel, number and type: 2 WX1M Outer diameter of the blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Fpsdpfo Aifcujx Aikop Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 500 kg per rotary table.

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Fsdoym Atrjpfx Aikepp Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table Fpedpfeptc Djx Aikjp - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Frozen berry (wild blueberries, cultivated blueberries, redcurrants, blackcurrants) polishing machine. The brushes remove frost from the product and clear away adhered impurities, such as frozen leaves. Fpsdo Aiccwjpfx Aikop • Material: Made of stainless steel • Dimensions (mm): 2000 x 650 x h1750 • Electrical parameters: 7.5 kW, 32 A, 400 V • Capacity: 1–2 tons / hour • Weight: 400 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. Fodpfx Ajz Dfuvsikjpp The machine is in excellent condition, fully functional, and can be tested in operation.

Year of construction: 2025, condition: new, Rotary Table Blasting Machines provide efficient and uniform surface cleaning for castings, forgings, and metal components. Using a rotating table and high-performance blast wheels, they remove rust, scale, paint, and contaminants to prepare parts for coating or further processing. Ideal for small to medium batch production, these machines offer consistent quality, reduced manual labor, and reliable performance in industrial environments. Fpsdjxzzi Tspfx Aikop

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. Fsdpfx Aozt Ai Esikspp with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, functionality: fully functional, used polishing machine Fodpfx Aio Aiu Hzekspp