Used Manual Polishing Machine for sale (73,673)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs Bjdpfx Afsh U Nvkomeww RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. Bwsdpfsh U Rznex Afmjw FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Year of construction: 2006, condition: used, NNP Bwsdpfxeb Ua Eyo Afmjw Food preparation machine Stainless machine with heads for Slicer/dicer and grater ideal for cheese, vegetables etc. Grids included 12x12, 8x8,

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. Bjdpfx Afjq Nmm Tjmoww YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, operating hours: 4,000 h, laser power: 10,000 W, working range: 3,000 mm, Used Bystronic Bysmart 3015 fiber 10kw cnc laser cutting machine for sale Year: 2021 Technical specs / Details table length: 3000 mm table width: 1500 mm burner heads: 10,00 Watt / 10kw Bysprint / Bystar fibre laser Bwodpfx Afsucd Awsmsw Description Complete with: Auto focus Auto nozzle centring Nominal sheet size xy: 3000 x 1500 mm Cutting area xyz: 3048 x 1524 x 70 mm Positioning accuracy Pa: +/- 0,1 mm Repeatability Ps: +/- 0,05 mm Maximum workpiece weight: 890 kg Operation via panel: ByVision Touchscreen and manual control unit

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Bwodpfx Aeucgalefmew Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Two pneumatic reject arms Fully stainless steel Belt dimensions 1750mm x 195mm In good working condition

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Bwjdpfeg Db Uqox Afmew Laser Output Power: 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks.

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Bjdpfx Afjr Hcmrjmsww Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. Bsdpfx Afjgq N Axomeww We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Bwodotn Rarjpfx Afmjw

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs Bjdpfetqdq Ssx Afmjww 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Condition: used, Year of construction: 2002, Technical details: x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm spindle taper ISO: 50 spindle turning speed range: 22 - 4000 U/min rapid traverse: 24 / 36 m/min main drive: 37 kW Bwsdpfov Uzt Ajx Afmsw total power requirement: 50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor *

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Bjdpjwfpqcsfx Afmjww Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: new, Year of construction: 2025, load capacity: 1,300 kg, lifting height: 4,200 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 1,986 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 849 kg, total height: 1,986 mm, total length: 1,776 mm, total width: 806 mm, color: red, SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1300KG LIFT HEIGHT UP TO 4200MM WITH INITIAL LIFT & FREE LIFT CALL US: 004959238968945 With the SCHORR electric high-lift pallet truck, you can easily transport heavy loads up to 1300kg. Achieve a lift height of up to 4200mm (depending on the selected version, either 2900mm or 4200mm). The forks have a standard length of 1150mm, making them ideal for both single-use and Euro pallets. The initial lift function is perfect for overcoming minor bumps or thresholds and allows simultaneous transport of two Euro pallets. The support arm lift increases ground clearance. With the free lift function, the mast only extends above the lift frame from a lift height of 1.45m – ideal for warehouses and rooms with low ceiling- or access heights. With the SCHORR electric high-lift pallet truck you can now stack pallets efficiently and ergonomically. Longer distances can be covered effortlessly. Thanks to its practical duplex or triplex mast, the truck fits into any truck or container. CALL US: 004959238968945 FURTHER ADVANTAGES OF THE SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK: Bodpfx Afoyd Natomjww - Duplex / Triplex mast (depending on version) - Electric steering - Free lift function - Initial lift function Prices depending on lift height / version: - 2900mm lift height: €5,293.00 net - 4200mm lift height: €6,974.00 net TECHNICAL DATA - Manufacturer (abbreviation): SCHORR - Manufacturer type designation: RR13HHE5IF - Rated capacity: 1.3t - Model: 290E // 420E - Own weight incl. batteries: 832kg // 849kg - Drive: Electric - Tyres: Polyurethane Main dimensions - Total length: 1762mm // 1776mm - Overall width: 800mm // 806mm - Length including fork back: 612mm // 626mm - Lift: 2900mm // 4200mm - Free lift: 1450mm // 1500mm - Mast height lowered: 1970mm // 1986mm - Mast height extended: 3330mm // 4680mm - Fork dimensions DIN ISO 2331: 60mm x 180mm x 1150mm - Outside fork width: 570mm - Aisle width with pallet: 800x1200 lengthwise 2250mm - Turning radius: 1400mm // 1320mm Speed - Travel speed with/without load: 4.2km/h / 4.5km/h - Lifting speed with/without load: 0.1m/s / 0.14m/s - Lowering speed with/without load: 0.13m/s / 0.11m/s *Further technical data available upon request. CALL US: 004959238968945 Our knowledgeable team is happy to answer any questions about the SCHORR electric high-lift pallet truck with free lift & initial lift 1300kg 2.9m / 4.2m. You can reach us by phone at 05923/8968945 or by email. We look forward to hearing from you and assisting you with your inquiry. Are the acquisition costs for a high-lift pallet truck too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please feel free to contact us by phone at 05923/8968945.

Condition: excellent (used), functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale Bwodpswbhipsfx Afmjw With tooling and J shape lower tool

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, laser type: fiber laser, laser power: 10,000 W, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, Equipment: CE marking, dust extraction, emergency stop, fume extraction, safety light barrier, Used Trumpf10kw 5040 4metre x 2metre Trumpf fiber laser for sale Year 2019 Complete with active cut control option Selling without automation Bsdpfx Afoylax Nsmsww 10kw / 10,000 w 4metre x 2metre cutting bed

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW Bjdpfsvgcrkex Afmoww spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA weight of the machine ca.: 43 t dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor *

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Bodpfevq N Ndjx Afmeww Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Bedpfx Afowkkpqomoww Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: good (used), Xerox Versant 280, including EX280 Fiery, 1 x OHCF, Stacker, etc. Various configurations are available! Bsdpfx Aev N D Hhefmoww None of the equipment mentioned is for sale or resale in Russia, or in any country subject to an EU embargo.

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Bedpjv R I D Hofx Afmjww Never Used / New Model RCP-141 To include Capper Feeder & automatic capper machine

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Bjdpfx Afjxgqwdsmeww Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: used, Year of construction: 2009, 1st Folding Unit 6 Buckles MBO Vario Control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers in parallel fold with standard PU roller coating Stainless steel knife shafts, 30 mm Motorized folding rollers + MW adjustment VACUSTAR separation head Feeder extension to 100 cm (instead of 84 cm) 2nd Folding Unit Vario Control Working width 53 cm Spiral folding rollers Motorized folding rollers + MW adjustment Sheet monitoring with transfer table Bwodexc If Rspfx Afmsw Including MBO Delivery A56 The ASP delivery shown in the photos is not included. Included is the A56 delivery as shown in the last photo.

Condition: new, functionality: fully functional, machine/vehicle number: RR16HHE3L, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 5,500 mm, free lift: 1,915 mm, fuel type: electric, mast type: triplex, construction height: 2,385 mm, battery capacity: 205 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 170 mm, fork thickness: 65 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,230 kg, total length: 1,975 mm, total width: 836 mm, SCHORR HIGH-LIFT TRUCK, ELECTRIC, PRO 1600KG LOAD CAPACITY, 5.5M LIFT HEIGHT, RR16HH550E3L, FULL FREE LIFT - 1,600 kg load capacity, designed for demanding warehouse operations - Triplex mast with full free lift: lift even with a compact 2,385mm overall height - Proportional lifting and lowering control: precise positioning, millimeter by millimeter - 24 V / 205 Ah lithium battery, easy to recharge in between - Low-maintenance AC drive, multi-function display, up to 16% gradient - Turning radius 1,506 mm, only 836 mm wide: maneuverable in narrow aisles A powerhouse for your warehouse Heavy pallets, high shelves, fast-paced operations: the RR16HHE3L, with a 1,600 kg load capacity, is designed for demanding warehouse operations and reaches a lift height of 5.5 meters. Goods receipt, block storage, racking: you cover the tasks of your warehouse with a single device instead of switching between multiple machines. The substance behind it: robust chassis, stable triplex mast, polyurethane tires for continuous operation, and an electromagnetic operating brake that safely holds the device and load in position in every situation. This ensures that the RR16HHE3L remains what your warehouse needs, even during multi-shift operations: a reliable device. Full free lift: full height, even under low ceilings Low doorways, narrow aisles, high shelves: that’s exactly what the full free lift is for. The forks first lift within the mast profile, without the mast extending even a centimeter upwards. With a compact overall height of only 2,385 mm, the RR16HHE3L passes through doorways and intermediate floors where extending masts would have long since collided, and stacks to full height as soon as there is space upwards. The same applies in practice: 836 mm overall width, a turning radius of 1,506 mm, and 2,356 mm working aisle width (800x1200 pallet lengthwise). You can maneuver safely where space is limited: between racking, in block storage, at the ramp. Millimeter-precise work, all day long The proportional lifting and lowering control implements every movement exactly as you specify on the ergonomic tiller: quickly when lifting, sensitively and millimeter-precisely when lowering in the topmost racking level. This avoids bumping pallets and damaging goods, even with operators who have little experience. Bwedpezkt H Njfx Afmow The low-maintenance AC drive operates energy-efficiently and handles gradients up to 16%, the multi-function display shows battery level and speed at a glance. The 24 V / 205 Ah lithium battery can be easily recharged in between without a memory effect; the 24 V charger is included. And the manufacturer stands behind it: spare parts stock, in-house workshop, personal advice. Technical data - Manufacturer (abbreviation): SCHORR - Manufacturer's type designation: RR16HH550E3L - Load capacity: 1.6t - Model: 550E3L - Self-weight including batteries: 1230kg - Drive: Electric - Tires: Polyurethane - Overall length: 1975mm - Overall width: 836mm - Lift: 5500mm - Free lift: 1915mm - Height of lowered lift mast: 2385mm - Height of extended lift mast: 5945mm - Fork dimensions: 65mm x 170mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2356mm - Turning radius: 1506mm - Travel speed with/without load: 5.0km/h / 5.5km/h - Lifting speed with/without load: 0.13m/s / 0.16m/s - Lowering speed with/without load: 0.22m/s / 0.13m/s - Max. climbing ability with/without load: 8% / 16%

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Bwjdpfx Aez Rztvjfmjw Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.