Used Automatic Grinding Machine for sale (73,462)

Condition: good (used), Year of construction: 2012, Working height: 840 mm Height of rear wall: approx. 3750 mm Depth of the system with water basin: approx. 1300 mm Width of the system with inlet and outlet: 11350 mm Redoyap Ngepfx Aa Uep Weight: 4060 kg

Condition: good (used), Year of construction: 2009, 11 spindle motors. Glass thickness: 3 to 30 mm. Minimum glass size: 85 x 150 mm. Speed: 0.5 to 5 min. Rjdpfevk Ed Rjx Aa Uop With water basin and pump. Working direction: from right to left. Working height: 780 mm. Total length: 8520 mm. Depth: 1130 mm. Total height: 4850 mm.

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Redjqmfv Djpfx Aa Uop With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: used, Year of construction: 1983, grinding length: 710 mm, type of input current: three-phase, Automatic knife grinding machine. Max. grinding length: 710 mm. Grinding motor: 1 kW. Rsdjxytnfopfx Aa Uop

Condition: new, Year of construction: 2025, With the ML/MLW Z multi-grinding stations, up to eight individually adjustable grinding stations can be arranged in sequence. This allows you to efficiently perform the entire machining process—from initial grinding to polishing your workpieces—in a single operation. Rodpfxjww Ugye Aa Ujp Diameter from 4 to 350 mm Dry or wet grinding

Condition: good (used), Year of construction: 1999, 8-spindle grinding system Rodpfx Asw Sdhnea Ujp Electrical connection power: 17 kW/380 V/50 Hz

Condition: used, Year of construction: 2004, 14 spindle system. Connected load: 380/400V/50Hz, 34 kW. Glass thickness: 3-60 mm. Rodpfxewynzce Aa Ujp

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 200 V, Mitsui precision grinder, surface grinder manufacturer Mitsui MGG CO.LTD type: MSG-250H2 year of manufacture:1990-6 Table width: 200mm Table length: 480mm Table longitudinal movement, maximum: 520mm Table lateral movement, maximum 250 mm Table movement: 5-20m/min Forward-backward feed: Per revolution: 6 mm Per scale: 0.02 mm Lateral feed: Per revolution: 6 mm Per scale: 0.01mm Grinding spindle speed: 2900 rpm 50 Hz Rjdjwviarepfx Aa Ujp Table total length: 1385x285 mm Magnetic table: 300x130x100 mm Coolant unit, Maximum height from table surface to center of grinding wheel axis: 400 mm Grinding wheel diameter, standard: 205mm Grinding wheel width: 20mm Wheel spindle speed: 2900 rpm 50Hz Grinding wheel bore diameter: 31.75mm Electrical power: 2 HP 1.5 KW 4P 200V 3 phase Weight, approx.: 1105 kg

Condition: used, Year of construction: 2016, 8 spindle system. Connected loads: 380/400 V, 19 kW. Rsdpfx Aev Rbtuja Uop Glass thickness: 3 - 25 mm. The system produces a beautiful glass finish. Condition: in very good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; Redsd Tc Haepfx Aa Ujp • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 Rsdetr Azkjpfx Aa Uep beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS Rodsirfpgopfx Aa Usp AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Rodpfx Aaexx Uudj Uop Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Rsdpfoymxkgjx Aa Uep Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Rodpfx Aasyh I U Io Uop Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length: 3,150 mm Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Control system: SIEMENS 840D Total power requirement: 70.6 kW Rodsylk E Hepfx Aa Uep Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, year of last overhaul: 2022, The machine was completely overhauled in 2022! Rsdoyk Stpjpfx Aa Uep TECHNICAL DETAILS Variable angle: 0-45°

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 185 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Maximum glass dimensions: 1,500 x 3,000 mm Z-axis travel (vertical): 185 mm Rjdpsyk S I Hefx Aa Usp Work table: 3,250 x 1,620 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 112672, total length: 6,700 mm, working height: 840 mm, workpiece weight (max.): 350 kg, controller model: RS150, workpiece height (max.): 35 mm, TECHNICAL DETAILS Processable glass thickness: 3-35 mm Processable dimensions (with corner bevel 15 mm) min.: 45 mm Processable dimensions (without corner bevel) min.: 35 mm Permissible weight per conveyor meter max.: 200 kg/m Total load: 350 kg Working speed: 0.5-5 m/min Pneumatic feed pressure: 6 bar Water tank capacity: 360 L MACHINE DETAILS Redeyk Spwjpfx Aa Uep Control system: RS150 Total installed power: 16.5 kW Pneumatic feed pressure: 6 bar Water tank capacity: 360 L Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,300 x 2,300 mm Height of working level: 840 mm Total weight (with empty water tank): 2,600 kg EQUIPMENT NC with automatic speed adjustment ABS covers for sound insulation and safety Multi-functional NC Centralized lubrication Adjustable glass removal rate Front adjustment of the rear arrising wheel Stainless steel housing and tanks CN 23 operator interface Programmable logic controller (PLC) integrated in NC Liquid crystal display (LCD) Control keypad with sensitive keys

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 806, overall weight: 4,600 kg, workpiece weight (max.): 2,000 kg, workpiece height (max.): 55 mm, number of spindles: 13, TECHNICAL SPECIFICATIONS Glass thickness: 3–55 mm Minimum glass size: 35 x 150 mm Rsdpfx Aajyk Skzo Ujp Maximum glass weight: 2,000 kg Speed: 0.3–5 m/min Number of spindles: 13 MACHINE DETAILS Power: 26 kW Operating pressure: 8 bar Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 9,590 x 1,350 x 3,700 mm Machine weight: 4,600 kg

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rsdpfxjyl U Nvo Aa Usp Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Rsdpfxsv R I D He Aa Uep Model RCP-141 To include Capper Feeder, automatic capper

Year of construction: 2020, condition: used, Fully Automatic Wrapping Machine. Year 2020. Suitable for shrink-wrapping doors, frames, architrave etc Ring Diameter 1100mm Conveyor height 870 - 900mm Rsdpfx Ajymncloa Uop Conveyor width 750mm Infeed conveyor length 1300mm Intermediate conveyor length 1800mm Outfeed conveyor 1300mm Conveyor load capacity 120 kg / m Max Crown rotation velocity 80 Total Weight 710kg Installed Power 3.00kw Power Supply 400v, 50 hz 3 Phase and Neutral Working Pressure 5 - 7 Bar

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Rodpfx Ajyglhfsa Usp Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: good (used), center height: 200 mm, grinding length: 1,600 mm, grinding wheel diameter: 450 mm, grinding diameter: 400 mm, Mostana Horizontal Spindle Grinder Model: 3L722B-80 Capacity: 1600 x 400 x 400mm Long Travel: 1780mm Cross Travel: 430mm VerticalTravel: 415mm Grinding Wheel: 450 x 80 x 203mm Spindle Motor: 11 KW Machine With: Rapid Traverse Vertical Incremental Downfeed Magnetic Chuck: 1575 x 400mm Coolant Clarifier Rsdpfoyglc Aex Aa Uep Digital Readout Dimensions: 5940 x 2660 x 2600mm High Weight: 8000 KGS