Edge Polishing Machine

CMG Taurus 100/8

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication Nledsyrr Uvjpfx Amnob 2 roller tables of 2mt. each Very good condition

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - . Nedovzav Nepfx Amnjlb

Year of construction: 2025, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 11425, Belt edge polisher for straight edges type Amber 5+4 SX This brand new model has replaced the famous Penta offering more functions and the possibility to process small pieces with a minimum width of 4cm! Comandulli used this machine for open days and customer demonstrations and puts it up for sale now at a special price. Please contact us to learn more about the conditions. Machine configuration: - Multifunctional unit for calibrating and upper drip grooves - 5 frontal polishing heads with oscillation movement - 2 upper bevelling units - 2 lower bevelling units Nsdpfoyycbksx Amnolb Pneumatic pressure rollers designed for narrow pieces from 4cm Manual frontal bar Manual lubrication Manual water valves 15" touch screen control panel Roller tables at choice

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). Nsdpfx Amjrpi E Asnelb polished, satinized and bush-hammered with the appropriate tool.

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Nsdpfxogn Tzls Amnolb Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Grinding tools optionally available Request more information

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting Nsdpjxak Hxsfx Amnelb There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Year of construction: 1993, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 900 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1400 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Electrically height-adjustable protective cover Machine-turntable-sizes: 3400 x 1500 (1800) x 800 mm Machine turntable: electrically rotatable by 360° Side stops can be folded manually Table equipped with pneumatic UP and DOWN movable rollers on all sides Nedpfx Amsym Nv Henelb

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure Nljdpfsvla U Tjx Amnob 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: used, Year of construction: 2016, operating hours: 14,745 h, * Radio * Air conditioning * Bucket * Joystick steering * Rear-view camera * Central lubrication system * Weight: 24,000 kg -----Internal vehicle number: 11133----Subject to errors & prior sale WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp German, English -- WhatsApp German, English, Arabic Nodpfjxchqmex Amnelb

Condition: good (used), power: 4 kW (5.44 HP), spindle mount: MK 5, throat depth: 1,600 mm, drilling capacity: 50 mm, quill stroke: 310 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 28 rpm, Armlength: 1600 mm Drillingcapacity steel: Ø 50 mm Tappingcapacity steel: M50 x 1,5 mm Spindle nose: MK 5 Spindle speeds: 28 - 2500 Rpm Spindle feed: 0,05 - 2 mm/rev. Spindle stroke: 310 mm Spindle -> Floorplate: 1500 mm max Drilling table: 1000 x 750 mm Size floorplate: 1820 x 986 mm Featured with: Nledpstt I T Isfx Amneb - Cooling unit - User manuals Spindle motor: 4 kW Country of origin: Czech Republic Machine weight: 4500 kg Machine LxWxH: 3250 x 1120 x 3400 mm