Used Manual Polishing Machine for sale (73,734)

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, V-belt drive, polishing hood polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm Kjdpfx Agegxugas Ujdg suction connection: mØ 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7.5 kW, IP54

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, V-belt drive, polishing hood Technical data: Polishing wheel: max. Ø 500 mm Kjdpsgxughsfx Ag Uodg spindle diameter: 35 mm polishing wheel width: max. 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed, polishing hood. Technical data: Polishing wheel: max. Ø 500 mm Kdedogxugtspfx Ag Uog spindle diameter: 35 mm polishing wheel width: max. 100 mm infeed: 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm Weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, infeed and oscillation, polishing hood. polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm Ksdpfx Agjgxugdj Uedg infeed: 200 mm oscillation: 50 mm Suction connection: Ø 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7,5 kW, IP54

Year of construction: 2016, condition: new, machine/vehicle number: 16-PMME-01, It is sold a single-sided polishing machine for manual editing to polishing of parts made of aluminium, steel, stainless steel brass and zinc die-cast. Technical data: Polishing Pad: Max Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max 50 mm Height 1.100 mm up to the polished shaft Suction connection: Ø 100 mm Dimensions (Lxwxh): 600 x 600 x 1500 mm Weight: 150 kg Supply voltage 3 x 400 V Power: 4 kW Made in Germany Kdjdpfxec Rwngo Ag Ueg Warranty: 12 months Optional: Extension with a frequency inverter will cost €950 per polishing machine. 1 piece FU, 1 potentiometer for regulating; 1 main switch

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot - polishing machine RPM500_OSZ2 Oscillation (50 mm) and delivery (100 mm) Polishing discs DM - 1000 mm Power - 4 kW Extraction support - 100 mm Kedpod Dt D Ijfx Ag Ujdg There are two piece

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Kjdpfx Asqmfv Deg Uodg With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: good (used), Used rotary indexing table polishing machine Kdjdpfoqmfv Sox Ag Usg Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: as good as new (ex-display), machine/vehicle number: PM1000_ERB, The polishing machine for robot processing is sold. Kdsdpod Hh Txjfx Ag Ujg Manufacturer: SHL polishing wheels DM 1.000 mm 5,5 kW drive power

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual processing. Ksdpfofiugusx Ag Usdg Drive power 5.5 kW Polishing discs diameter - 1000 mm

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg Kdsdpsdzqmhefx Ag Uog good condition

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius Kdsdpfx Aewhf Hfjg Ueg 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Kdsdpfx Agedzqn Ds Uog Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Kdjdpjvg Rh Tsfx Ag Ueg Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition Kjdpfx Agji E Iz Ie Ujdg - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for manual also robot editing to polishing of parts made of aluminium, steel, brass and zinc die-cast. Technical data: Polishing Pad: Max Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max 50 mm Suction connection: Ø 100 mm Kdsdpfec Rfg Uox Ag Ueg Dimensions (Lxwxh): 1800 x 1300 x 1800 mm Weight: 180 kg Supply voltage 3 x 400 V Power: 4 kW Height up to the polished shaft on request Made in Germany Warranty: 12 months Optional: Extension with a frequency inverter will cost €950 per polishing machine. 1 piece FU, 1 potentiometer for regulating; 1 main switch

Condition: reconditioned (used), SIMEC strip polisher with 8 heads on belt, working width 2000mm, thickness 100mm. Suitable for marble and granite. Includes tilting roller loader and roller table. Capacity: 2000mm x 100mm. Very good condition, serviced. Machine dismantled and loaded onto truck. Contact by phone in French, by email in your language. Ksdpfx Agjxb D Npe Uedg

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Ksdpfeh Ug Ulsx Ag Uedg Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: good (used), Year of construction: 1971, Spherical head polishing machine for machining spherical surfaces. Data: Kedpfog Rxl Djx Ag Uedg Manufacturer: Thielenhaus Type: PMS50B6A Year of manufacture: 1971 Operating voltage: 380V Rated current: 48A Control voltage: 
~ 220V = 24V 
Weight 9,5t Fully automatic feeding device

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine Kodpfskzk Exjx Ag Ujdg With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm Kdjdpfx Agstylguo Ueg - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg Kedewy Ulzopfx Ag Uedg - Mobile undercarriage

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Kdedpfxjtx Ubre Ag Ueg Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm Kdedsw Uhamjpfx Ag Ueg - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Ksdpfx Aoxg Rhpog Usdg