Used Lf 532 for sale (1,814)

Condition: used, maximum load weight: 27,239 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2018, next inspection (TÜV): 08/2027, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, SCHMITZ-Cargobull Type SKO 24/L – 13.4 FP 45 COOL – 3-axle cryogenic reefer semi-trailer – “Blumenbreit” – with a double-deck loading system and 22 pieces of height-adjustable aluminum support beams, 1 row of cargo securing rails embedded in the side walls as a perforated strip, certificate for cargo securing according to DIN EN 12642 Code XL, international customs seal for the body with a rear door, loading dimensions i.e. 13410 x 2490 x 2650 mm, Thermo-King SLXi 400 - 50 refrigeration unit (diesel and electric operation) with start/stop automatic system, Thermo-King temperature recorder model Touchprint with printer, internal circulation bulkhead approximately 1950 mm high, ventilation flap in the bulkhead at the top left and in the rear doors on the left and right, base protection strip approximately 300 mm high, floor made of aluminum grooved sheet, ROTOS - SCB axles 3x 9000 kg air-suspended with lifting and lowering device, lift odometer – analog (axle odometer), center right, ABS, disc brakes with EBS, 1 rubber impact strip at the rear transversely and 2 rubber impact bumpers perpendicular to the lamp panel, Dynamic Ramp Protection, compressible corner roller impact bumpers with stainless steel rollers, spare wheel holder in chassis design for 2 spare wheels at the end of the frame, plastic tool storage box at the rear left, large pallet storage box for 36 Euro pallets, technically possible total weight 39,000 kg, good overall condition!, original mileage 137,260 (verifiable), German vehicle with German documents! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Chedpfxszt T N As Ac Tob

Condition: used, maximum load weight: 27,239 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2018, next inspection (TÜV): 08/2027, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, SCHMITZ-Cargobull, type SKO 24/L – 13.4 FP 45 COOL, 3-axle cryogenic box semi-trailer – “Blumenbreit” – with a double-deck loading system and 22 units of height-adjustable aluminum support beams, 1 row of load securing rails embedded in the side walls as a perforated strip, certificate for load securing according to DIN EN 12642 Code XL, international customs seal for the superstructure with a rear door, loading dimensions i.e. 13410 x 2490 x 2650 mm, Thermo-King SLXi 400 - 50 refrigeration unit (diesel and electric operation) with start/stop automatic, Thermo-King temperature recorder, model Touchprint, with printer, internal circulation bulkhead approximately 1950 mm high, ventilation flap in the front wall at the top left and in the rear doors on the left and right, baseboard protection strip approximately 300 mm high, floor made of aluminum corrugated sheet, ROTOS - SCB axles, 3 x 9000 kg, air-suspended with lifting and lowering device, lifting odometer – analog (axle odometer), center right, ABS, disc brakes with EBS, 1 rubber impact strip at the rear across the width and 2 rubber impact bumpers perpendicular to the lamp panel, Dynamic Ramp Protection, compressible corner roll ramp bumpers with stainless steel rollers, spare wheel holder in frame design for 2 spare wheels at the end of the frame, plastic tool storage box at the rear left, large pallet storage box for 36 Euro pallets, technically possible total weight 39,000 kg, good overall condition!, original mileage 137,260 (verifiable), German vehicle with German documents! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Cjdpozt T N Nsfx Ac Tjhb

Condition: used, mileage: 334,322 km, power: 194 kW (263.77 HP), first registration: 04/2018, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: green, gearing type: mechanical, emission class: euro6, total length: 9,330 mm, total width: 2,550 mm, total height: 3,650 mm, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, In accordance with our "General Terms and Conditions," without any guarantee or warranty, and subject to availability until the transaction is completed, we can offer you the following vehicle: DAF LF 260 Box Van + Tail Lift, 14-tonner (Vehicle 200) First registration: 16.04.2018 334,322 km Engine: 6,700 cc 194 kW / 260 hp MOT (TÜV) valid until 03/2027, Inspection valid until 09/2026 Permissible total weight: 14,000 kg Unladen weight: 6,825 kg Payload: 7,175 kg Overall length: 9,330 mm x Overall width: 2,550 mm x Overall height: 3,650 mm Internal dimensions: L: approx. 7,200 mm x W: approx. 2,480 mm x H: approx. 2,400 mm Roof spoiler, sun visor Distance cruise control with emergency braking assist, lane keeping assist Daytime running lights, auxiliary headlights Leaf/air suspension Tires: 285/70R22.5, tread depth approx. 80% front, approx. 60% front, approx. 70/70% rear Box van made by Junge Tail lift Bär BC 1,500 kg, mounted at the rear 2 rows of lashing points in the box van Lighting in the box van Lashing points on the left and right in the outer frame Reinforced floor Cjdpfxezyzd Ij Ac Tohb LED reversing lights Last service at 311,000 km, next service due at 359,000 km Central locking with remote control Heated driver's seat 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Radio/CD with large screen Air conditioning On-board computer 6-speed manual transmission Rear view camera Price: €25,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the district court (Amtsgericht) of Ludwigslust for disputes up to a value of €10,000; for disputes exceeding this value, it is the regional court (Landgericht) of Schwerin. Subject to errors, typos, and prior sale.

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I Codpeyilyqefx Ac Tshb YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, Year of construction: 2022, functionality: fully functional, operating hours: 814 h, nominal power (apparent): 2 kVA, Kimla LF 1020 Powercut Fiber Laser 2 kW – Precision and Efficiency for Your Production The Kimla LF 1020 Powercut fiber laser cutting machine equipped with a 2 kW fiber resonator is a technologically advanced solution designed for companies seeking maximum productivity, precision, and reliability in metal processing. As a product of a renowned Polish manufacturer, this machine combines innovative engineering with robust build quality, providing a competitive edge in today’s dynamic market. The LF 1020 model is optimized for processing sheet metal in standard sizes, offering a 1000 x 2000 mm working area, making it a versatile tool for a wide range of applications, from custom to series production. Key Features and Advantages: • Dynamic Linear Drives: Unlike conventional drive systems, Kimla’s proprietary linear motors provide extremely high acceleration and positioning speeds. This significantly shortens cutting times for intricate shapes and increases overall machine throughput. • 2 kW Fiber Source: The 2000 W fiber resonator is the ideal balance between cutting speed and versatility. It enables efficient processing of mild steel, stainless steel, aluminium, as well as non-ferrous metals such as copper and brass (subject to manufacturer’s approval), while ensuring excellent edge quality. • High Energy Efficiency: Fiber laser technology is far more energy-efficient compared to CO₂ lasers, resulting in lower electrical costs and reduced environmental impact. • Monolithic, Rigid Frame: The machine body is manufactured as a single, rigid component to ensure exceptional stability and resistance to vibrations, even at maximum processing speeds. This directly translates to top-level precision and repeatability of cuts. Chsdpfx Acow Izays Tjb • User-Friendly Software: The integrated Kimla control system and software are operator-friendly, allowing for quick project preparation (CAD/CAM) and full control over the cutting process. • Low Operating Costs: No optical elements that require frequent maintenance (such as mirrors in CO₂ lasers) and the long service life of the fiber resonator minimize maintenance costs and downtime. Technical Specifications: Model: Kimla LF 1020 Powercut Laser Source Power: 2 kW (2000 W) Type of Resonator: Fiber Working Area (X/Y): 1000 mm x 2020 mm Drives: Magnetic linear drives Control System: Integrated Kimla system Applications: The Kimla LF 1020 laser is an ideal solution for: • Companies in the metalworking and sheet metal processing industries • Manufacturers of machines, equipment, and steel structures • The automotive sector • The advertising industry (visual elements, 3D letters) • Companies producing metal furniture and interior fittings

Year of construction: 2022, condition: used, machine/vehicle number: MAGIU65592, Acquisition date: February 2022 Chsdpfxozxif Do Ac Teb Original list price at the time: €13,740.00 (net)

Condition: ready for operation (used), Philips handheld control unit for Maho CNC 532 / 432 control system, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Chedpfxei Eckfe Ac Tsb

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Cjdoxdy Erspfx Ac Tshb Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Features Year of manufacture: December 2024 Working area: 1300 × 1300 mm Laser power: 3,000 W Laser type: Fiber optic (Raycus, MAX, or IPG) Cutting head: Raytools with autofocus Positioning accuracy: ±0.008 mm Repeatability accuracy: approximately ±0.02 mm Chsdpszkt Tcsfx Ac Tob Maximum speed: 40 m/min Maximum acceleration: 0.5 G

Condition: used, mileage: 19,578 km, power: 92 kW (125.09 HP), first registration: 03/1988, fuel type: diesel, overall weight: 9,700 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,000 mm, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and omissions: IFA W 50L LF fire engine with double cab, pump, and tank First registration: March 10, 1988 19,578 km (original) Csdpfx Aozlcahec Tshb Engine: 6,560 cc 92 kW / 125 hp Permissible gross vehicle weight: 9,700 kg, unladen weight: 81.50 kg, payload: 1,550 kg Overall length: 7,700 mm x overall width: 2,500 mm x overall height: 3,000 mm Double cab, 2 seats in front, 7 in the back 2 rotating beacons in front, 1 on the passenger side in the back + 1 flashing light on the left and right in the back, on top Towing eye in front Power connection/supply connection on the passenger side in front 2 hose holder housings on top, walkable roof rack 2 water connections on the driver's side and passenger side in the back, 1 in the back Water tank under the vehicle Hose reel Complete pump unit Trailer hitch Hose reel holder in the back Work spotlights in the back, on top 2 seats in front, 10 seats in the back 5-speed manual transmission Manual roof Auxiliary heater Siren Good overall condition Price: €5,500.00 (VAT not shown) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €10,000, and the regional court of Schwerin for disputes exceeding this amount. Subject to errors, omissions, and prior sale.

Condition: excellent (used), mileage: 487,561 km, power: 118 kW (160.44 HP), first registration: 01/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,050 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2008, Equipment: tail-lift, Technical information Number of cylinders: 4 Engine capacity: 4.462 cc Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Weights Empty weight: 5.960 kg Carrying capacity: 6.160 kg GVW: 11.990 kg Max. towing weight: 22.000 kg Functional Tail lift: dholandia, tail lift, 2000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: BT-PN-32 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Chedpfx Aezyyvcsc Tjb When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 337,099 km, power: 235 kW (319.51 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, seat heater, trailer coupling, = Additional Options and Accessories = - DAB Radio - Air Suspension - Air-Suspended Seats - Power Take-Off (PTO) Chsdpfxozulf Es Ac Teb - Tow Hitch = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 11.9 cc Axle Configuration Brakes: Disc Brakes Suspension: Air Suspension Front Axle: Steered; Tire Tread Depth Left: 65%; Tire Tread Depth Right: 65% Rear Axle 1: Dual Tires; Tire Tread Depth Left (Inner): 65%; Tire Tread Depth Left (Outer): 65%; Tire Tread Depth Right (Inner): 65%; Tire Tread Depth Right (Outer): 65% Rear Axle 2: Lift Axle; Tire Tread Depth Left: 65%; Tire Tread Depth Right: 65% Weights Unladen Weight: 14,485 kg Payload: 12,515 kg GVWR: 0,000 kg Functional Lifting Capacity: 5,150 kg Lifting Height: 950 cm Crane: Palfinger E0Z95, Year of Construction 2008, behind the cab Condition Technical Condition: very good Optical Condition: very good = Company Information = Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available daily to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle. At KW-Automotive, you will find a wide selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personal Service Reliable Vehicles Attractive Prices Fast Delivery, so you can get started right away Quick Communication via Telephone and WhatsApp Sales and Delivery also to Foreign Countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All sales prices are plus preparation and delivery costs. Would you like to learn more about a specific vehicle? Visit our website with detailed information, videos, and technical details. Do you need a quick answer? Simply write to us via WhatsApp! We will send you further information, photos, or a video immediately. Job van Eldik

Condition: used, mileage: 22,450 km, power: 100 kW (135.96 HP), first registration: 05/1994, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, Mercedes 814 D LF 8/6 5-speed manual transmission, differential lock, 9 seats, double cab with doors Chodezig Nnopfx Ac Tob Water pump + water tank

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, First owner. Small volunteer fire department; it will remain fully operational at the fire station until the new vehicle is delivered in the summer of 2026. Originally driven only just under 19,000 kilometers. The vehicle passed its technical inspection (TÜV) without any issues on September 1, 2026, and was immediately approved for continued use. Valid until 09/2027. Last service at 18,138 km, with "no defects found." Maintenance was always performed exclusively at the local Iveco/Fiat authorized workshop, and this was consistently done until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heating system. Fire engine LF 8/6 with a MAGIRUS superstructure, manufactured in 2000. 600-liter water tank. Equipped with a tank heating system. Rear pump FP 8/8 with 118 operating hours. Lighting mast located between the superstructure and the cabin. 24-volt and compressed air connection on the driver's side step. Engine: Iveco 4-cylinder inline diesel engine with 3908 ccm, Euro 2 emission standard; it starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. Maximum speed of 86 km/h, according to the vehicle registration documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR (Anti-Slip Regulation). Radio. Electrically adjustable exterior mirrors. Unladen weight according to vehicle registration documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has a main compartment measuring approximately 2.87 m long / 2.29 m wide / 1.60 m high. The roof is walkable, with a large storage box on the left side; the box lid is easy to open and close thanks to gas-filled struts. Interchangeable tow hitch with a 2000 kg braked trailer load or 1500 kg unbraked trailer load (ball and pintle hitch). Tires: MICHELIN with snow flake symbol, DOT code 2020. Size: 205/75R17.5. Condition: 6 tires are almost new. Batteries: 2x NEW in 2025. Prepared for digital radio communication. The special warning lights with front flashers are functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in a ready-to-use condition after being taken out of service. Chsdpjzpgphofx Ac Tjb The Iveco with MAGIRUS-Weisweil superstructure is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that operate smoothly and identically in all 4 doors and also in the ignition lock. The compartment door locks and flaps are all easy to open and close. The Iveco has recently received several new parts. According to the mayor, this vehicle has not been involved in any accidents. The vehicle is explicitly offered here as an "operational vehicle." If the vehicle is not put back into service as an operational vehicle in the future, the special warning lights must be completely removed, and all vehicle markings must be removed. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services (BOS) of all kinds. Sales to purely private end consumers are excluded. Subject to prior sale and erroneous information. The offer is subject to §25

Condition: excellent (used), mileage: 285,207 km, power: 132 kW (179.47 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,950 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 5,580 mm, loading space width: 2,490 mm, loading space height: 2,410 mm, Year of construction: 2012, Equipment: tail-lift, General information Cab: single Registration number: BZ-VF-78 Technical information Number of cylinders: 4 Engine capacity: 4.462 cc Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Weights Empty weight: 5.660 kg Carrying capacity: 6.430 kg GVW: 11.990 kg Max. towing weight: 15.490 kg Chodpezyyqtsfx Ac Teb Functional Tail lift: BAR CARGOLIFT, tail lift Maintenance, history and condition APK (MOT): tested until 04/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 326,000 km, power: 108 kW (146.84 HP), first registration: 04/1996, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, emission class: euro2, total length: 7,500 mm, total width: 2,320 mm, total height: 4,000 mm, Year of construction: 1996, Equipment: tail-lift, Additional information: * Axles: 2 * Payload: 1590 kg * Type | First axle: Sava R * Tire size | First axle: 205/75 R17.5 * Tire tread depth inner left | First axle: 80% * Tire tread depth inner right | First axle: 80% * Maximum axle load | First axle: 3000 kg * Type | Second axle: Sava R * Tire size | Second axle: 205/75 R17.5 * Tire tread depth outer left | Second axle: 80% * Tire tread depth inner left | Second axle: 80% * Tire tread depth outer right | Second axle: 80% * Tire tread depth inner right | Second axle: 80% * Maximum axle load | Second axle: 5250 kg * Wheelbase: 400 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Loading capacity: 2000 kg * Position | First axle: Front Cedpfx Acjzw Spvs Tohb * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Drum brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Tail lift | Type: Sliding tail lift Additional features: * Aluminum fuel tank * Air suspension * Disc brakes * Fog lights * Homepage * Parabolic suspension Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. ---- Prices listed exclude BPM (Dutch vehicle tax).

Condition: used, mileage: 1,001 km, first registration: 01/1999, empty load weight: 130 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 1999, Equipment: crane, Vehicle location: Bovenden Csdpfxezyvd Nj Ac Tshb Includes Atlas swivel head! Construction width approx. 450mm! Capacity approx. 90 liters. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: used, mileage: 96,708 km, power: 162 kW (220.26 HP), first registration: 01/2006, fuel type: diesel, tire size: 265/70 R19.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 10,500 mm, total width: 2,500 mm, total height: 3,900 mm, Year of construction: 2006, Equipment: central locking, electric window regulation, power mirror, spoiler, = Additional Options and Accessories = - CD player - Headlights - Visor - Toolbox = Additional Information = Cjdpozykx Ijfx Ac Tjhb Tire size: 265/70 R19.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Unladen weight: 6,980 kg Payload: 7,020 kg GVWR: 14,000 kg Damage: None

Condition: used, mileage: 746,000 km, power: 184 kW (250.17 HP), first registration: 01/2002, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, Year of construction: 2002, Front axle: Steered Rear axle: Double tires Chsdszxlqvspfx Ac Tob Damage: none

Condition: good (used), Year of construction: 2017, turning height: 1,600 mm, workpiece weight (max.): 16,000 kg, Videos of the machine in operation can be provided upon request. Max. turning diameter: 3200 mm Chodpfx Asyrflzoc Tsb Table diameter: 2800 mm Max. turning height: 1600 mm Max. workpiece weight: 16,000 kg Table speed range: 70 rpm Number of table speed ranges: constant Vertical movement in the Z-axis (ram stroke): 1100 mm Horizontal slide travel in the X-axis: 1720 mm Working feed rate range: 2 - 2000 mm/min Rapid traverse in the X/Z axis: 7 m/min Crossrail traverse: 360 mm/min Main motor power: 55 kW Installed power: 69 kW Dimensions: 5500 x 6540 x 4900 mm Weight: 43,000 kg

Condition: used, mileage: 26,479 km, power: 177 kW (240.65 HP), first registration: 07/1994, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Equipment: all wheel drive, parking heater, Construction/Refurbishment: * SO-vehicle LF16-12, * Manufacturer: Schlingmann, * 3 roller shutter doors on each side (left and right), * Lighting mast, * Auxiliary drive, * Front warning lights, * Rosenbauer pump with 224 operating hours, * 3 rotating beacons, * 2 towing eyes at the front, * Additional headlights, Equipment: * Spacious cab, * 4-door, * Engine brake, * 4x4 drive, * Longitudinal and transverse differential locks, * Off-road gear, * Flame start system, * Tires: 10 R 22.5 Other: * 1 previous owner, * Axle loads: Front axle 5,500 kg - Rear axle 9,200 kg, * Payload 4,920 kg according to ZLB, Chodpfx Acozywwwo Teb * Gross vehicle weight 13,500 kg Since 1972, we have been your reliable partner for everything related to cars and commercial vehicles in 28832 Achim, near the Bremer Kreuz. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options with favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle is possible. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical errors and data transmission errors. Listed equipment may need to be verified separately. Subject to change and prior sale.

Condition: used, power: 156 kW (212.10 HP), first registration: 07/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,850 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2016, Equipment: ABS, electric window regulation, power mirror, = Additional options and accessories = Cjdpfxszynx Sj Ac Tohb - Speed limiter = Remarks = DAF LF210, 2016, 333,800 km Euro 6 = More information = Technical information Number of cylinders: 4 Engine capacity: 4.500 cc Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Weights Empty weight: 6.555 kg Carrying capacity: 5.535 kg GVW: 11.990 kg Max. towing weight: 12.000 kg Maintenance APK (MOT): tested until 07/2027 Financial information Price: On request Identification Registration number: 25-BHL-3 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, # CNC Machining Center 532 Metal Technics Polska MTP CNC 532 ## SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland ## Description The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. ## Technical Specifications * Table: 800 x 260 mm * Spindle taper: BT30 (BT40 optional) * X/Y/Z travel: 500 / 320 / 420 mm * Spindle-to-table distance: 90-470 mm * Maximum spindle speed: 8000 rpm * Tool magazine: 10 positions * Rapid traverse X/Y/Z: 10 / 10 / 8 m/min * Working feed: 2.6-2500 mm/min * Servo torque X/Y/Z: 6 / 6 / 7.7 Nm * Positioning accuracy: +/- 0.02 mm * Repeatability: +/- 0.01 mm * Main motor: 3.7 kW * CNC control: SIEMENS SINUMERIK 808 Advanced * Servo drives: SIEMENS * Power supply: 400 V, three-phase * Dimensions: 2100 x 1800 x 2200 mm * Weight: 2100 kg Chjdpoy Ht Axsfx Ac Tsb ## Standard Equipment * SIEMENS SINUMERIK 808 Advanced CNC * SIEMENS servo drives * 8000 rpm spindle * 10-position automatic tool magazine * Fully enclosed working chamber * Precision linear guideways and ball screws * Automatic lubrication system * Pneumatic system * LED working-area lighting * 3-color status/alarm lamp * CE Declaration of Conformity * Technical and operating documentation ## Applications Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. ## Transport, Warranty & Service Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. ## SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Condition: used, mileage: 440,000 km, power: 194 kW (263.77 HP), first registration: 02/2018, fuel type: diesel, overall weight: 16,000 kg, next inspection (TÜV): 02/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: air conditioning, tail-lift, DAF LF 16.260 refrigerated box truck First registration: 06.02.2018 VIN: XLRAEL2700L471887 Cooling system: Frigoblock FK13 down to -20°C Tail lift: Palfinger C2000s 2,000 kg Cargo space (internal): L 7.50 x W 2.45 x H 2.30 meters Payload: 8,000 kg 1 side door Air conditioning Manual gearbox Chedpfx Acozxxx He Teb The vehicle is in very good condition! TÜV valid until 02-2026

Condition: used, functionality: fully functional, mileage: 72,000 km, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, Year of construction: 2012, Equipment: air conditioning, crane, "DAF LF 55.280 Chsdpfx Aeztdqwsc Tob 4x2 – Year 2012 DIESEL / Euro 5 Mileage: 72,000 km Manual Transmission / Engine Displacement: 6693 cc / Power: 211.30 kW GVW: 160 quintals Payload: 9,500 kg / Wheelbase: 3,800 mm Accessories: - Air Conditioning Equipment: - Fixed body, dimensions: 4200 x 2550 x H 1140 mm - PM 8523 LC crane * Radio"