Used Lh 54 for sale (3,912)

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 180/200/H90 mm Dsdpfoglakwjx Acwour -Weight: 3 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm Dusdpfx Acsglmldowsr -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg Dujdec Ih S Ajpfx Acwsr

Condition: used, High-frequency ignition device, heating, gas and oil burners Duedpjd Iy Nrofx Acwor -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm Duodpsci N H Djfx Acwsr -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg

Condition: used, Gear motor, electric motor -Speed: 27/54/168 rpm -Power: 0.18/0.37/1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 33 kg Dsdpfx Acockbgbowjur

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum Duedpfx Aeglakhocwsr -Hole spacing: 54 mm -Dimensions: 160/190/H110 mm -Weight: 3,3 kg

Condition: used, Gear motor, electric motor -Speed: 54 rpm -Power: approx. 0.18 kW Dujdpfxoc U Rhie Acwor -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 360/180/H180 mm -Weight: 13.7 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws Dujdeglmllepfx Acwjr -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube Dedpfjdparasx Acwour -for: scribing plate, clamping plate -Prism size: 24/70 mm -Dimensions: 80/54/H100 mm -Weight: 2.6 kg

Condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK Djdpoud Urxjfx Acweur -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by agreement! 54 m³ Kempf grain tipping semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ Dsdpswuyx Asfx Acwour * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: – (NEW) * Capacity: approx. 54 m³ (10.00 m long x 2.43 m wide x 2.20 m high) * Gross weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift/lower function / rapid discharge * EBS Wabco * Kempf 400 high-performance steel sluice, throughput capacity 30–40 m³/h * 2 partition walls with 3 locking positions, sliding in overhead rails * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right (hoses not included) * Combination door (swing + double-wing door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Doors 1/3 to 2/3 division * 1x grain shutter with funnel/dust sack * Fifth wheel height from 1,170 mm to 1,230 mm * 1x approx. 4.00 m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box, rear right * Single wheel mudguards * Drop legs, aluminium * Operator platform at the front * Sliding tarpaulin with central locking * 3x tarpaulin support bows * Load manometer * Shovel and broom holder * Dual round LED three-chamber tail lights * 1x LED work light, left * 1x LED work light, right * 1x LED interior lighting with switch * Body finished in RAL 9007 grey aluminum, chassis RAL 9005, tarpaulin colour dust grey * Air tanks made of aluminum * 4 m aluminium ladder * Tyre pressure monitoring system * Access steps inside front bulkhead * Floor, 6 mm New vehicle! Rental option also available!

Condition: used, functionality: fully functional, machine/vehicle number: 6359, Heidelberg Cylinder S 54×72 for die cutting only Djdpfxoyw Nwgo Acwour Machine data serial number: 6359 Was in daily use. Defects: missing right side dimension, cylinder is damaged on the upper edge, the deepest point of the damage is 45mm. The machine error does not affect the operation of the machine!!

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Duedpfx Acovk Scgswjr Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 Dsdjpq If Dopfx Acweur T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Dsdpfx Aepgkmwocwjur Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: repair required (used), functionality: limited functionality, fuel type: diesel, color: yellow, shovel volume: 4 m³, Year of construction: 2014, operating hours: 11,758 h, Item for sale: LIEBHERR LH 60 machine. Year of manufacture – 2014. Equipment: 12.5 ton hook, 4 cbm grab, 1.2 m boom extension, 0.8 m boom extension. Operating hours – 11,758. Factory purchase – full service history available. Dusdpfxoydi Ide Acwer

Condition: used, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Djdpfoyhcgbox Acweur Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats. Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits. Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages. Installation Requirements & Site Preparation Footprint: 3.8 × 3.2 m; recommended service clearance aroun...

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Duodpfx Acjw H Auwewjr

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Dedpfx Acju Ur Sqewour

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dodpfx Ajw H Au Rscwjur

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dsdpjw H Au Defx Acwsur

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Dusdou T Rhzjpfx Acwjr

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Duedpfx Acew Uk A Dswsr

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg Dusdewvqagspfx Acwjr