Used 2D Measurement Machine for sale (66,697)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Hedpfxsxyungo Ad Ron Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Hjdpfoyap R Rjx Ad Ren Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2010, condition: good (used), 2.pcs. ALU tables for measuring machine Make MEUSBURGER Type:BST 5500 Year 2010 Dimensions length 5500 mm width 1200 mm height 700 mm Hjdjg Uf Ngjpfx Ad Ren In good condition.

Year of construction: 2000, condition: used, Spare parts measuring machine MORA Mü-Tos Hedpfxjiuiauj Ad Rsn 2XMeasuring stand , 2XMeasuring control box and miscellaneous.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) Hodpfxsy U Urdj Ad Ron - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Hjdpfozaktgsx Ad Rjn Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: used, Year of construction: 2005, Measuring range 1.000 mm error limit 20°C +/- 1°C 3 + L(mm) / 300 µm repeatability 2sec: 2 µm Resolution 0,01 / 0,001 mm adjustment speed max. man. 1 m/s Power 0,7 - 1,6 N temperature +10 .. +40 °C total power requirement 15 W weight of the machine ca. 15,0 kg Hedpfxoxgu Igo Ad Ron dimensions of the machine ca. 0,4 x 0,4 x 1,30 m Height Measuring Device TRIMOS - V 1002+ - Application area: 1.235mm - Max. angularity deviation: 12µm - Autonomy with air cushion: 30h - Autonomy without air cushion: 100h

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231474, KEYENCE Model Series IM-6020, Year of Manufacture 2012 For sale is an optical measuring machine, KEYENCE IM-6020, in good, fully functional condition. The IM series is recognized for fast, high-precision, and operator-independent measurement, making it ideal for use in quality assurance, goods-in inspection, and production monitoring. Technical specifications (overview): Model: IM-6020 Year of manufacture: 09/2012 Measuring principle: Optical / non-contact Measuring range (X/Y): approx. 200 × 200 mm Measuring range (Z): Height measurement via autofocus Measuring accuracy: up to approx. ±2 µm (depending on measurement conditions) Repeatability: Very high, operator-independent Camera: High-resolution CCD camera Illumination: Incident light / transmitted light / contour illumination Measuring functions: - Length, angle, radius, and diameter measurement - Contour and form measurement - Comparative measurement (OK/NOK) - Automatic dimension recognition Software: KEYENCE IM software for quick program creation Measuring time: A few seconds per component (even for multiple features) Condition: Hjdpfsy U Hhqsx Ad Ron - Used - Well maintained - Fully operational - Ready for immediate use Machine dimensions: approx. 900 x 500 x 1500 mm Machine weight: approx. 32 kg The machine can be inspected by appointment. Subject to prior sale and changes or inaccuracies in the technical data and specifications.

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Hedoyiy Hbopfx Ad Rsn Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Year of construction: 2016, Travel paths X / Y / Z 300 / 200 / 200 mm Max. table load: 16 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany Hedpjt E Hd Rsfx Ad Rsn

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm Hjdpfx Aexb Eg Njd Ren y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 250 t dimensions of the machine ca. 1300 x 1000 x 1600 m Hodpfx Adex Szp Ds Ren

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Hjdsu N At Repfx Ad Ren Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t Hodpfx Adsu S Izco Ren dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: like new (used), Like new. Compatible with Polyworks software. A very beautiful and elegant 3D CNC measuring machine, the Renishaw Equator 300, offered at an attractive price. Three-dimensional comparison with an accuracy of two micrometers! Measuring volume: X and Y axis ø 300 mm – Z axis 150 mm. Resolution: 0.0002 mm. Scanning rate (SP25): 1000 points per second. Scanning speed: 200 mm per second. Maximum traverse speed: 500 mm per second. Operating temperature: +5 to +50 °C. Maximum power consumption: 190 watts. Maximum workpiece weight: 25 kg. Machine weight: 25 kg. Height: 700 cm. Width: 570 cm. Length: 500 cm. No compressed air required. SP25 SM25-1. 6 x SH25 probe heads Wecksler for 6 probes. MODUS™ IM DMIS software & license key. Renishaw control PC, monitor, mouse & keyboard. (Also controllable with Polyworks). The starting bid for the offered configuration is €5,000. Hsdpfx Aey S Dbcsd Rjn

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Hodpfx Aefy U Ewsd Ron Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Hodpfxeyi E Iks Ad Ren Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Repeatability: ± 3 micrometres The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. The system was delivered on 20.06.2024 directly from Keyence.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Hodpfx Aex H T H Dod Rsn Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg #8406

Condition: good (used), Year of construction: 2015, functionality: fully functional, Hexagon Metrology Optiv Classic 432 coordinate measuring machine in good, fully functional condition. Measuring range (single sensor): 400x300x200mm Dimensions: 1232x910x1663mm Weight: approx. 800kg Maximum workpiece weight: glass plate approx. 30kg Accuracy: MPEE = 2.9 + L/100 [μm] Hedpfx Aox H T Emed Rjn No additional software included. A PC is provided, but it is unknown to what extent the PC-DMIS 2020 R1 software can still be used.

Condition: excellent (used), Year of construction: 2020, Very well-maintained measuring system from Keyence. Hsdpfxoxgq Ams Ad Ren Type: XM-M1200 (XM-C1000) with PC XM-1500 Year of manufacture: approx. 2020 #8385

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 Hjdpoy R A Apefx Ad Ren x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: used, Year of construction: 2002, Used coordinate measuring machine, manufacturer: Mitutoyo, model CRT-A 122010, year of manufacture: 2002, serial number: N0001301. Machine features: - PC and software - Probe set (as shown in pictures) - Control: JSBOX-M Type A - Renishaw probe head PH10MQ / TP200 - Control unit UC240H A set of transport locks is included with the machine. Last calibration date: 12/09/2024 Quantity: 1 Condition: Used Asset location: Schaeffler Ultra Precision Drives GmbH i. L. Ohsener Str. 79 – 83 31789 Hameln, Germany Delivery terms: EXW (Incoterms 2020) Sale on an "as-is, where-is" basis, ex location. The buyer is fully responsible for dismantling and removal of the equipment. Maynards can suggest a dismantling supplier upon request. Payment terms: Immediately after receipt of invoice. If any surcharges apply, further information will be provided on the invoice. Seller: Maynards Europe GmbH Hjdpjy N Rinefx Ad Ron Maynards sells and invoices the item on behalf and in the name of the stated seller.

Condition: used, Year of construction: 2015, functionality: fully functional, We offer this used Mitutoyo QVT1-X404P1L-D coordinate measuring machine, year of manufacture 2015. Model: QVT1-X404P1L-D Code No.: 364-180SY Hedpjx Tiihefx Ad Rjn SO No.: Serial No.: 60866040 Year of manufacture: 2015 Software: version 13.2 including FORMPAK v5.4 The machine includes 7 different measuring heads as well as mounting materials for sample holders. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld Hodpfeyrcx Sox Ad Ren ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. Hedpfxsyrcx Ej Ad Ron The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.