Used Lh 54 for sale (11,665)

Condition: like new (used), functionality: fully functional, emission class: euro5, Year of construction: 2025, operating hours: 250 h, Equipment: cabin, crane, gripper hydraulics, hydraulics, onboard computer, Basic unit LH150 MDG Port Access to the chassis Electric slip ring (42-channel) with angle sensors Rear-view camera High-pressure filter (between hydraulic pump and control valve) Side-view camera Wide platform on the superstructure, both sides Automatic central lubrication system External condenser Cylinder guard ERC energy recovery system LiDAT machine monitoring system Stationary air conditioner (adjustable) Horn integrated in the left joystick Configurable shortcut button on the joystick Engine shutoff (emergency stop) in the cab Adjustable lowering speed for hoist and arm cylinders Spirit level (for horizontal machine alignment) Boom cylinder cushioning Panoramic laminated impact-resistant window Laminated impact-resistant, heated front windshield LED boom headlights 4,200 lumens, 2 units LED stick work lights 4,200 lumens, 4 units Load-lifting cylinder pressure warning device UNDERCARRIAGE Gantry undercarriage raised by 1.7 m, width 5,900 mm, clearance – clearance height 6,700 mm, clearance – clearance width 4,200 mm Platform/work deck on the undercarriage at the rear of the machine Supports 1,500 x 1,650 mm, detachable Double solid Liebherr tires 12.00-20 MH5 intermediate ring Boom assistant 8 wheel sets, a total of 32 tires Optical boom signal Central lubrication system for the undercarriage SUPERSTRUCTURE Liebherr HVI hydraulic oil (-20 to +40°C) External bypass filter Operating fluids (-20 to +40°C) Hydraulic oil heating system Pre-heating device (400V) Reversible drive fan Automatic LED warning beacon on superstructure LED rear work lights on superstructure, 2 units, 4,200 lumens Godpfxoxb Uafj Aacsuh Auxiliary/service crane, 200 kg lifting capacity Wind speed measurement device Grapple pressure reduction (closing/opening) OPERATOR CAB Hydraulically elevating cab LHC-D 1090 T LHC-D 1090T cab platform Emergency descent Comfort radio Operator seat 2 kg fire extinguisher First aid kit Emergency exit and descent equipment Radio installation preparation Cooling storage compartment Adjustable armrest Sunblind Right laminated impact-resistant side window Laminated impact-resistant floor window Windscreen wiper for panoramic window Front LED work lights on cab, 2 units, 4,200 lumens with rain protection cover Rear cab work lights, 2 units, LED 2,000 lumens Standard cab with doors LED beacon warning light Working area limitation (height, depth) Autolift

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Guodpfx Ajwvqagoacjh -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Gedpjukf Ncsfx Aacjuh Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: used, mileage: 54,125 km, power: 400 kW (543.85 HP), fuel type: gasoline, gearing type: automatic, first registration: 11/2014, next inspection (TÜV): 05/2024, fuel consumption (urban): 17.2 l/100km, fuel consumption (extra-urban): 11.8 l/100km, fuel consumption (combined): 13.8 l/100km, CO₂ emissions: 327 g/km, emission class: euro5, color: white, number of seats: 5, Equipment: air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Equipment package: designo Exclusive, exterior mirror with blind spot assistant, entertainment system in the rear (2 screens), rim design: AMG 5-spoke (matt black), fire extinguisher, luggage compartment cover / roller blind, rear cup holder, rubber mats in the passenger / cargo area, interior: designo carbon trim, load protection net, LM rims 9.5x20, media interface (universal interface for iPod / AUX / USB / MP3), PTS parktronic system (front and rear), tire pressure monitoring system, reversing camera, electric sliding / tilting roof, transmitter for garage door opener (integrated), seat comfort package, Harman Kardon sound system with Logic7 surround system, TV tuner, analog and digital, preparation for mobile phone / convenience telephony / LTE-capable Gedpfx Aaovnnidecouh Other equipment: Adaptive brake light, driver / passenger side airbag, ambient lighting, AMG optic/styling package 1, traction control (ASR), leather-covered dashboard, audio navigation system: APS COMAND autopilot system with hard drive navigation including integrated DVD changer, white/bichromatic exterior light, aspherical exterior mirror, left, electric exterior mirror. adjustable and heated, both, bi-xenon headlights, indicator light integrated in the exterior mirror, brake assistant, brake callipers painted red, chrome package, differential locks, automatic switch-on for driving lights, illuminated entry rails (stainless steel), electronic traction system (ETS), stainless steel exterior package, driver assistance system: hill start assist, electric windows front + rear, Alcantara roof liner, interior mirror with automatic dimming, Isofix mounts for child seat on rear seat, body: 5-door, catalytic converter controlled, automatic climate control (thermotronic), head airbag system (windowbag), headrests front NECK-PRO, fender flares, load anchors / lashing eyes, heated steering wheel with multifunction, metallic paint, engine 5.5 ltr. - 400 kW V8 KAT, wheelbase 2850 mm, split rear seat, low emissions according to Euro emissions standard 5, front left seat electrically adjustable (with memory), front right seat electrically. adjustable (with memory), seat cover/upholstery: designo leather 1-color, heated front seats, start/stop system, tinted glass All-wheel drive, ESP, ABS, ECO start-stop function, blind spot assistant, COMAND Online with DVD changer, TV tuner, Harman Kardon® Logic7® surround sound system, navigation system, rear view camera, Parktronic system (PTS), distance assistant DISTRONIC, anti-theft package, automatic climate control, sunroof, heated windshield, ambient lighting, leather interior, leather steering wheel, heated seats for driver and front passenger seats, seat comfort package, multi-contour seat for driver and front passenger, ISIFIX child seat anchors, stainless steel ram protection, side running boards, bi-xenon headlights, ball head trailer coupling / 3500, tire pressure monitoring, aluminum rims, vehicle can be covered with advertising and/or labeled.

Year of construction: 2012, operating hours: 25,897 h, condition: refurbished (used), Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm Max. roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Gusdpfxsg H Tmbe Aacjh Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Heidenhain LC 182 length measuring rod ML 2240 mm, . 387092-54 , SN:21990823L , unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gusdpoi Eak Eofx Aacsh

Year of construction: 2000, condition: used, x-travel 1000 mm Guedpfst Hw Nyjx Aacoh y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 163 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 220 x 85 mm Godpewvp R Djfx Aacjuh -Weight: 8 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000 Machine no. 14099667 >> Travels X/Y/Z 500/250/160 mm >> Travel W 480 mm >> Clamping area (L x W) 885 x 320 mm >> Maximum table load 250 kg >> Distance between table and spindle nose 0 – 605 mm >> Feed rate X/Y 1 – 2000 mm/min >> Feed rate Z 1 – 1200 mm/min >> Quick tool change system SF 32 Guodsv S Ew Tjpfx Aacsh >> Speed range continuously variable 9200 rpm >> Drive power 5 kW >> Space requirements (W x D x H) 1850 x 2550 x 2400 mm About the machine: Offered is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Programming is particularly easy thanks to the user-friendly Heidenhain conversational programming. HEIDENHAIN TNCs are workshop-standard contouring controls that allow you to program conventional milling and drilling operations directly on the machine using easy-to-understand conversational programming. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take advantage of the opportunity to view and try out this machine on-site with power.

Condition: used, Year of construction: 1986, functionality: limited functionality, type of input current: three-phase, filling weight (min.): 170 g, filling weight (max.): 500 g, Filling line for jars with twist-off lids, comprising: infeed rotary table, Kugler filling machine, upstream jar blowing station (steaming, unique / prototype), capping machine with vibrating hopper for twist-off lids with steaming, including steam generator. Previously used for jars with diameter/filling volume of: 63 and 66 mm for approx. 225 ml // 82 mm for approx. 425 ml. Heated product hopper, optionally with pneumatic transfer cart. Control system completely rebuilt in 2019; new vibration sensor/controller installed. Gedow I Awgjpfx Aacouh

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Godpfx Aow H Auwsacsuh

Condition: new, Baumüller BUM62T -75/97.5-54-M-010 Built-in single power unit , unused, 100% functional Gusdpfsi D T Hqex Aacoh

Condition: used, overall weight: 48,000 kg, empty load weight: 14,180 kg, maximum load weight: 33,820 kg, axle configuration: 3 axles, loading space length: 6,000 mm, loading space width: 2,740 mm, loading space height: 420 mm, first registration: 08/2004, next inspection (TÜV): 11/2024, color: black, tire size: 245/70R17,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, 1st axle liftable, steering axle, forced steering, lifting and lowering, 3 axles with hydraulic forced steering, ABS (anti-lock braking system), extendable, lashing eyes. Gjdew E Hc Aopfx Aacouh Body: Extendable to a total length of 17.58 m, maximum 9 m in the low bed, extendable to 3.24 m width. Hydraulic steering can be controlled via cable remote control. Low-loader with detachable gooseneck and 3 hydraulically forced-steered axles, 1st axle liftable. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 169 mm -Mounting: Hole shaft cone Ø 44-54 mm Gujdpfxjwvp Ens Aacoh -Type designation: not available -Dimensions total Ø 230 x 95 mm -Weight: 10 kg

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Gsdpfx Asw H Au Roacjuh

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope, round strand rope -Manufacturer: Glöckner-Seile, crane rope round strand rope Ø 12 mm -Rope type: 7x18 -Length: 54 m -Number: 6x wire rope available -Price: per piece Gedpsv Haiaefx Aacjuh -also other crane ropes: available -Transport dimensions: Ø 400 x 367 mm -Weight: 34 kg/piece

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Guedpfow H Au Dex Aacjh

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, servo power unit BUS624-38/55-54-0-000 -Built-in control device: Controller BUS 6E -Type: BUS6-E-SM-0012-A011-0000 Guodpfx Ash R D Rpsaceh -Number: 3x devices available -Price: per piece -Dimensions: 300/165/H380 mm -Weight: 11.9 kg/piece

Condition: used, Gear motor, electric motor -Speed: 54 rpm Gjdeb A Iqpopfx Aacouh -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 55 -Weight: 49 kg

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: BUS624-38/55-54-0-000 -Input: DC 540 V/640 V Gusdpfxsu Dcv Ue Aacoh -Output: 3AC 360V/425V 3x38A 0-300Hz -Quantity: 4 pieces available -Price: per piece -Dimensions: 190/380/H300 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Dimensions: 395/185/H185 mm Guedpfx Aecwtpcoacoh -Weight: 16.5 kg

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor Guodottimbjpfx Aacjh -Manufacturer: Lenze, adjustable geared motor with brake -Adjustable gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Engine: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 4x gear motor available -Price per piece -Dimensions: 410/280/H200mm -Weight: 16.7 kg/pc.

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 Gsdpfxsd Ndi Hs Aacsuh -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Quantity: 3 pieces available -Price: per piece -Weight: 7.3 kg

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit Godpfx Aaob N E Hajceuh -Type: BUG622-28-54-E-000 -Number: 4x module available -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece

Condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis Gusdpfxoud Urxj Aacjh -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 5x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece