Used Jointer for sale (259)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: - Working width: 220 mm - Working height: 120 mm - Feed motor power: 3 kW - Lower spindle motor power: 5.5 kW - Left/right spindle motor power: 7.5 kW - Upper spindle motor power: 7.5 kW - 5th (bottom) spindle motor power: 7.5 kW - Spindle speed: 6,000 rpm - Spindle diameter: 40 mm - Minimum tool diameter: 125 mm - Maximum tool diameter on lower spindle: 125 mm - Maximum tool diameter on right spindle: 190 mm Bcjdoykvw Espfx Aa Uew - Maximum tool diameter on left spindle: 180 mm - Maximum tool diameter on upper spindle: 200 mm - Maximum tool diameter on 5th spindle: 180 mm - Feed rate: steplessly adjustable 5–22 m/min - Feed roller diameter: 140 mm - Adjustment range of jointer table and fence: 10 mm - Length of jointer table: 2,000 mm - Feed return - Push button switch for feed 'forward' - Insert cutter for guide groove - Powered roller in outfeed table - Manual lubricant pump Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), I sell in very good condition thicknesser Hommel. Bjdpfxsud Aryj Aa Uscw Width 60cm. Working height 24cm. Motor power 3.7 KW. Manual adjustment, with 2 folding tables.

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips Bjdpfxsx Nrvvj Aa Ujcw - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: used, Working width: 450 mm Working height: 100 mm (jointing) Bodpjvnu H Ajfx Aa Uocw Kölle planing machine type HA 51, also referred to as a jointer for smoothing and levelling (jointing) timber, including Hemag jointing unit.

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake Bsdjymntkopfx Aa Uscw - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables Bcjdpfx Aajx Swwdo Ujw - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via a parallelogram mechanism Both jointer tables feature noise-reducing table lips Precision bearing cutterhead with reversible knives Thicknessing table with centrally guided column and support Adjustable spirally serrated feed roller for optimum planing results Technical data: Jointer width: 410 mm Table length: 1800 mm Table height: 850 mm Cutterhead speed: 4500 rpm 4-knife cutterhead Cutterhead diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. cutting depth: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Workpiece clearance min./max.: 3 - 225 mm Max. cutting depth: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space required: 1800 x 850 mm Bsdpfswzzyuex Aa Ujcw Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1996, Maximum working width: 230 mm Maximum working height: 130 mm Number of spindles: 5 pcs 1st spindle: bottom Spindle diameter 40 mm Mounting length 240 mm Speed 6000 rpm Motor power 4.0 kW 2nd spindle: right Spindle diameter 40 mm Mounting length 140 mm Speed 6000 rpm Motor power 7.5 kW (shared motor with left spindle) 3rd spindle: left Spindle diameter 40 mm Mounting length 140 mm Speed 6000 rpm 4th spindle: top Spindle diameter 40 mm Mounting length 240 mm Speed 6000 rpm Motor power 5.5 kW 5th spindle: bottom Spindle diameter 40 mm Mounting length 240 mm Speed 6000 rpm Bjdpfsyhc E Rox Aa Uocw Motor power 4.0 kW Motor brakes: mechanical Height adjustment for the top spindle: electric with feed Feed brake system: Yes Feed speed, stepless up to: 5 - 24 m/min Feed roller pressure: pneumatic Feed drive power: 2.2 kW Feed drive: cardan shaft Lubricant pump: manual Max. jointing stock removal: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 pc Control type: push button operation Spindle position indicator: mechanical numeric display Infeed rollers before the jointer: Yes Central lubrication point: Yes Description: right spindle pneumatically adjustable from 45 mm, max. saw blade diameter 200 mm; top spindle horizontally pneumatically actuated via selector switch (forward and back). Max. saw blade diameter 200 mm; both spindles switched together. Approximate weight: 3,000 kg Storage location: supplier

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim Bcjdpfx Aowwwkhsa Usw

Condition: used, functionality: fully functional, Working width 410 mm Length of jointer tables each 1,000 mm Cutterhead motor 3 kW Bcodpfxsyba S Ie Aa Uew 2-knife cutterhead Motorized height adjustment of thicknessing table, Fine thickness adjustment via handwheel Thickness setting readable via scale, Manual star-delta main switch Pressure rollers in thicknessing table Ribbed feed roller Cutterhead safety guard for surfacing operations Side fence tiltable

Condition: used, Year of construction: 2017, power: 2.2 kW (2.99 HP), input voltage: 400 V, volume flow: 1,593 m³/h, suction capacity: 1,593 m³/h, filter area: 9.5 m², total height: 2,200 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, negative pressure: 2,200 Pa, nominal power: 2.2 kW (2.99 HP), space requirement height: 2,200 mm, space requirement length: 1,800 mm, space requirement width: 1,000 mm, transport length: 1,800 mm, transport width: 1,000 mm, transport height: 2,200 mm, tank capacity: 240 l, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Bjdpfx Asygbbhea Uocw Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2018, Working width: 410 mm Cutterhead: reversible knives Number of knives: 4 Jointer table length: 2000 mm Jointer fence angle adjustable: yes Jointer tables fold up: manual Bjdpfx Ajyhgh Nsa Uecw Maximum thicknessing capacity: 240 mm Thicknessing table height adjustment: handwheel Display for planing thickness: mechanical counter Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm Bedpfx Aoyh Auioa Uecw - Extractable, suction diameter Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: excellent (used), Planer-thicknesser combination 630 with foldable tables. Sturdy cast iron machine from the liquidation of a Swiss company. Bcodoycw Icspfx Aa Uew

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table Bsdpfx Asx Sq A Hsa Ujcw - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller Bjdpfxsx Sqz Ao Aa Ujcw - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm Bodsx R Dumjpfx Aa Ujcw - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: AB00022255, functionality: fully functional, blade shaft diameter: 120 mm, feed roller diameter: 67 mm, table length: 520 mm, table width: 900 mm, working height: 250 mm, TECHNICAL DETAILS Table dimensions: 520 x 900 mm Working height: max. 250 mm Working height: min. 3 mm Tersa cutterhead: 520 mm with 4 knives Cutterhead diameter: 120 mm Feed roller diameter: 67 mm Feed speed: 5 / 8 / 12 / 18 m/min MACHINE DETAILS Main motor power: 9 kW Weight: 1,058 kg Bedpfx Aoydc Ecoa Uecw EQUIPMENT Pneumatic table adjustment Electronic thickness table height adjustment via positioning control Tilting fence including auxiliary fence for strips

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Bcodpfxsyi Dw Ds Aa Usw Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR Bcodpfox Rq Nwjx Aa Usw (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle Bedpeyg Iznsfx Aa Uecw - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Catalogue number: S 0335 Bcjdpeyg Iwcofx Aa Uow - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), working width 430mm 4-knives shaft fence with angle regulation tables length 2080mm Bedpfx Ajw Ad N Ioa Ujcw delta/star start manual regulation of thicknesser table two feeding speed horizontal drill

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm Bcjdpfsih Dxdox Aa Uew chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. Bcsdpfx Aodqy Uqea Ujw With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece