Used Jointer for sale (269)

Condition: new, Year of construction: 2025, Working width: 520 mm Planer block: Tersa Gtsdpfxsxrbgys Admst Number of knives: 4 Planing table length: 2250 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 695

Condition: used, Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 Gtedpfx Adoxpn Tzemjt ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Felder A951L Jointer Max. planing width: 510 mm, Table length: 2700 mm Spiral cutterhead, Manual height adjustment of the infeed table with readout 5.5 kW motor, electric brake Godpfox Anviox Admjtt Machine in very good condition, still on the original knives since new.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Gsdpfx Adexgkf Ujmett Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: used, KÖLLE HA 41 jointer planer Gedpoxf Tqdsfx Admott Planing width approx. 410 mm 2-knife cutterhead

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw Gtsdpfxowz H Ane Admst 1 outfeed table

Condition: new, Year of construction: 2025, Working width: 420 mm Planer shaft: Tersa Number of knives: 4 Jointer table length: 2000 mm Concave/pointed joint adjustment: no Gtodpfx Asxrbg Hjdmet Adjustable jointer fence angle: yes Lifting jointer tables: manual Maximum thicknesser pass height: 240 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Number of milling spindles 2 St. fence 1 St. workpiece ja yes STEGHERR Cross rung milling machine, Type KSF-mini ----- Including stop ruler with measuring scale and sliding stop. Tools included. Specialized jointer for the efficient production of cross-mustard joints. The KSF-mini cross-mustard jointer is the product of STEGHERR's extensive experience in building these specialized jointers for cross-mustard joints. With the KSF-mini, all common cross-mustard joints can be produced quickly and precisely. Even profiled joints can be machined on the KSF-mini. Precise routing is achieved because the workpiece is machined on three sides in a single clamping operation. The tool is driven by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the joint width. The saw blades that perform the flattening can be adjusted to the dimensions of the profile cutter using spacers. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Gsdpfx Adewi Upfomstt Table base Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (corresponds to a 10 mm web width) Fence ruler with measuring scale and sliding stop as shown in the pictures. Installation dimensions approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical specifications according to the manufacturer, without guarantee!)

Condition: good (used), Veba thickness planer – planing width 500mm, 4 knives, 2 feed speeds, table length 230cm, electric brake, adjustable fence, 5.5kW motor, machine inspected, good condition, weight approx. 900kg. Gtsdjxx Tiaspfx Admet

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Gjdpfx Adew I U Nuomott Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cutting height with 250 mm blade: 80 mm Table width 800 mm Rip fence length: 635 mm Mortising machine : Gtsdpfx Ajt T U E Eodmjt Wick mortising (0 to 16 mm) Power and Motors Voltage: 220 V Pluging: Singlephased Overall dimensions

Condition: new, Year of construction: 2022, machine/vehicle number: MR004714, Combined planer and thicknesser with a maximum planing width of 310 mm. The thicknesser has a maximum working height of 230 mm. Machine assembled and equipped with cord and plug. Af hine is equipped with the following options: - Tersa planer shaft - Handwheel with thicknesser readout clock Technical specifications: - Maximum planing width: 310 mm - Planer shaft diameter: 70 mm - Number of knives: 3 pieces - Planer shaft type: Standard - Maximum chip removal: 4 mm - Maximum planing height: 230 mm Gsdpjvzl S Ajfx Admett - Minimum planing height: 4 mm - Planer height reading: Measuring ruler - Feed speed: 6 /min - Thicknesser table dimensions: 430 x 310 mm - Thicknesser table height adjustment: Manual - Planer blade length: 1328 mm - Planer guide dimensions: 1300 x 150 mm - Guide adjustable at an angle: 90-45 ° - Motor power: 4 hp - Serial number: 26KL28725

Condition: new, Year of construction: 2025, Working width: 410 mm Planer head: Spiral cutterhead Number of knives: 66 Jointer table length: 2020 mm Jointer fence, angle adjustable: yes, 45° to 90° Max. thicknessing capacity: 230 mm Thicknessing table height adjustment: handwheel Planing thickness display: mechanical digital indicator Feed speed: 5.5 / 10 m/min Infeed roller: steel Gedpfx Asxrbg Tjdmett Outfeed roller: steel Table rollers: no Motor power: 5.3 kW Motor brake: yes, automatic Extraction port: 100 mm Machine length: 2020 mm Machine width: 882 mm Weight: 480 kg

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg Gedpfowz Nzmox Admstt - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Gedpfxjxxavmo Admjtt Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Dimensions and weights Godpfow I Ul Nox Admstt Length: approx. 1725 mm Width/depth: approx. 880 mm Weight: approx. 270 kg Surface planer Maximum cutting depth: 4 mm Extraction connection Thicknessing hood extraction port diameter: 2 x 120 mm Thickness planer Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 4 mm Electrical data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead Type: TERSA Number of planer knives: 3 pcs Speed: 5200 rpm Maximum planing width: 300 mm Feed Feed speed: 7 m/min Availability: short-term Storage location: Hochheim

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Godpotn H E Njfx Admett Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cutting height with 250 mm blade: 80 mm Table width 800 mm Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: good (used), Weinig Hydromat 22A Number of spindles: 7 Working width: 220 mm Working height: 120 mm Feed table length: 2,500 mm Gtodpfxewk H Rqe Admjt Spindle diameter: 50 mm Feed: Cardan shaft Jointer: 6 + 7 spindles Spindle arrangement Lower 5.5 kW Right 5.5 kW Left 5.5 kW Right 5.5 kW Top 7.5 kW Top 5.5 kW Bottom 5.5 kW

Condition: new, Year of construction: 2025, Working width: 510 mm Planer shaft: Tersa Number of knives: 4 Surface table length: 2250 mm Surface fence, angle adjustable: yes, 45° to 90° Maximum planing height: 250 mm Height adjustment of thicknessing table: electric Gsdpfx Adjxrbhksmott Thickness display: mechanical counter Feed speed: 8 / 16 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: segmented pressure beam Motor power: 7 kW Motor brake: yes, automatic Extraction port: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) Gtedpou Udd Ssfx Admst 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: excellent (used), SCM F3A jointer planing machine Godpewzyuqjfx Admjtt - Planing width: 300mm - Table length: 2100mm - Three-knife cutterhead - Weight: 290kg - Fence tiltable up to 45° - 3HP motor - 380 Volt

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Gtodsw Rhkqopfx Admst Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: used, Year of construction: 1998, Working width: 510 mm Cutterhead: strip knives Number of knives: 4 Jointer table length: 2250 mm Gtodpfxjxnhpaj Admot Jointer fence angle adjustable: yes Lifting of jointer tables: manual Maximum thicknesser pass-through height: 220 mm Thickness table height adjustment: handwheel Planing thickness display: mechanical counter Feed speed: 4 / 6.5 / 10 / 16 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5.5 kW Motor brake: yes Extraction connection: 120 mm Machine length: 2250 mm Machine width: 1100 mm Weight: 800 kg

Condition: excellent (used), Combined surface-planer and thicknesser 610 mm Cutterblock with wedge knives Wedge knife cutterblock, 2 knives, jointing fence Auxiliary fence, motor on rocker mount Gedpfx Asqnurtjdmott Size 1800 x 1100 x 950 mm Weight approx. 900 kg

Condition: used, Year of construction: 2003, working width: 510 mm cutter head: Streifenmesser number of blades: 4 surface table length: 2000 mm fence tilting: ja surface table fold up: manuell maxilum thickness planing height: 230 mm height adjustment thickness table: electric read out table height: digital Gtjdpfxoxgn N Ro Admjt feed speed: 7 / 14m/min infeed roller: Stahl outfeed roller: stahl pressure beam: durchgehend table roller: ja motor power: 5,5 kW motor brake: ja suction connection: 160mm machine legth: 2200 mm machine width: 950 mm weight: 800