Used Joinery for sale (202)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Dedpfx Adszifmlshsku

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Dodpszyihuofx Adhjku Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 500 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 1,500 kg, The machine used to operate for 10 hours a week. Now it has been idle for 5 years. It is not in use. Dsdpjz I D E Iefx Adheku

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor Dkedpfx Adozu Anwohsu For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools Djdpfx Adjz Dga Tjhjku - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL conveyor system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Dsdeza Dzdepfx Adhjku Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement. Dodpfxszux Hcj Adhsku

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Dodpezifpgefx Adheku

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, A Great machine for the most efficient and efficient production of windows and doors. Dkjdpfx Aozif Euedhou

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel Dkodsz Da Htjpfx Adheu - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A Djdszv Tt Hjpfx Adhoku ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Dksdszrazcjpfx Adheu Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started. Dodpfjzudynsx Adheku

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 8,000 kg, Hundegger SC1 Year: 2005 Dodpfszzx Dbjx Adhoku It is being sold in excellent condition as seen in the pictures. We will help you disassemble and load the machine.

Condition: used, Year of construction: 2003, machine/vehicle number: 9020, Equipment: safety light barrier, MACHINE SPECIFICATIONS Manufacturer: HUNDEGGER Model: SC 1 Year of manufacture: 2003 Type: CNC wood processing center Condition: Used Intended use: Professional processing of structural timber components Drilling Finger mill Revolver mill Marking unit FEATURES The machine was designed to automate and increase the efficiency of the timber component production process. The use of CNC technology enables repeatable and accurate processing based on a programmed design. Hundegger is a renowned manufacturer of industrial wood processing machinery; the brand's equipment is valued for its robust construction, precision, and suitability for professional production environments. APPLICATIONS The machine can be used for the production of, among other things: Dsdpfx Adsz A Rwmeheku roof trusses, roof structures, timber house structures, timber-frame house components, prefabricated structures, structural elements made of glulam and solid timber, other components requiring precise CNC processing. We can dismantle and load machine to the truck

Condition: excellent (used), IM Very good condition. Dkedpfxjw Ebwuj Adheu

Condition: good (used), functionality: fully functional, type of input current: three-phase, A very nice machine with the added benefit of the infeed wheel (or roller) on the Centauro R800 resaw acts as a mechanical hand. It pushes wood into the blade. This creates even cuts and smooth surfaces. It also helps you safely cut very thin, uniform pieces. Dkodozifn Aepfx Adhou

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,300 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, cutting height (max.): 250 mm, total length: 350 mm, total height: 300 mm, cutting width (max.): 420 mm, total width: 50 mm, control cabinet width: 220 mm, saw blade diameter: 450 mm, rotational speed (min.): 3,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, Weinmann WBZ160 POWERSIX machining/sizing center. Year 2019. Approximately 3300 operating hours. Serviced in July 2026 by a HOMAG technician (report available upon request). Dkjdpszwf Acefx Adheu Very good overall condition. Fully functional. Machine has already been disassembled and is ready for loading (packaging done according to supplier specifications). Transport will require 2 covered semi-trailers (to be arranged and paid for by the buyer).

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Dsdpfxjzzcc Ie Adhsku Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) Dksdpfx Ajzb I Iwsdhsu - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: excellent (used), functionality: fully functional, 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Dodpfx Aszz Nq Sodhjku Spindle diameter: φ40 mm Total power: 16.8 kW Year of manufacture: 2021 Weight: 2550 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We are offering this used Schmidler S4 woodworking machine, manufactured in 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Type of machine: abbundanlage (cross-cutting machine) - 4-strand cross-feed conveyor (inclined) - Infeed roller conveyor - Zero-point detection - Electronically controlled under-table swivel miter saw - Saw blade diameter 710mm - Rotation angle 360 degrees - Tilt 0-65 degrees - Waste wood discharge - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling cutter including finger cutter and dovetail milling cutter - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Powered outfeed roller conveyor - Pusher – pneumatic - Transport and measuring system - Conveyor belts to be replaced - Control system: sema btl Maximum component dimensions: Height 300mm Width 400mm Overall length approx. 21m Infeed roller conveyor Outfeed roller conveyor with pusher and stacking bars Dedpfx Ajy Ewxzsdhsku Machine used, fully functional, Conveyor belts to be replaced Machine can be inspected by arrangement. Available for sale immediately. If you have any questions or would like more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 423.10.100.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 400 mm, tool diameter: 88 mm, number of blades: 63, actuation type: manual, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,000 mm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 580 kg, year of last overhaul: 2012, total length: 2,100 mm, cutting height (max.): 5 mm, cutting width (max.): 410 mm, height adjustment type: electric, table height: 888 mm, Equipment: CE marking, documentation/manual, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) Dkodpfx Adjz Iml Rohsu - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. Dedoz H Sbbepfx Adhoku See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system Dksdpszmrw Ssfx Adhou 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems