Used Jointer Jointer for sale (258)

Condition: good (used), For sale is a nice jointer-thickness planer from SCM. The machine works flawlessly and can be inspected and tested on site. About the machine: - 410 mm planing width - 3-knife Tersa cutterhead - Motor brake Codoyfiaiopfx Afnopu - Tiltable fence - 240 mm planing height

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Cpsdpsx U Dgdofx Afneu Edge jointing fence Auxiliary stop 4 kW, 380 Volt Two-knife wedge shaft Tables fold upwards Machine ready for immediate use

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Storage location: Nattheim Codpfxov I Eatj Afnopu

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min Cpsdpfx Afop R Iwhjnsu This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, table width: 630 mm, number of blades: 102, Equipment: low noise, motor brake, For sale is a HOFMANN AD 635 jointer-thickness planer in premium industrial design. The machine features a HELIX spiral cutterhead (630 mm), a powerful 7.5 kW motor, and a thickness table positioning control. Equipment / Highlights: + HELIX cutterhead, 630 mm – 102 carbide reversible knives + Very quiet operation, reduced vibration + Excellent planed surface quality + Motor power: 7.5 kW (upgrade from standard) + Digital positioning control for the thickness table – sensor monitoring with photoelectric switch + Electronic start and braking unit + Two feed speeds: 7 / 14 m/min + Thickness table supported by 4 posts, quadruple guidance + Rubber-coated infeed and outfeed rollers + SUVAMATIC cutterhead guard + Integrated operating hours counter + Robust industrial construction Technical data: + Planing width: 630 mm + Cutterhead: HELIX, solid steel Cjdpfx Aox Ir N Tofnopu + Cutterhead speed: 5,800 rpm + Knives: 102 carbide reversible knives (37°) + Motor: 7.5 kW, 400 V / 50 Hz + Feed speed: 7 / 14 m/min + Extraction ports: 2 × Ø 160 mm Scope of delivery: + HOFMANN AD 635 Jointer-Thickness Planer + HELIX Spiral Cutterhead + SUVAMATIC Safety Guard + Positioning Control + Operation manual (German) HOFMANN AD 635 Jointer-Thickness Planer | HELIX | 7.5 kW | Display unit Manufacturer: HOFMANN Maschinenfabrik GmbH – Made in Germany HOFMANN AD 635, jointer-thickness planer, thickness planer, jointer, combination planer, HELIX cutterhead, spiral cutterhead, woodworking machine, joinery machine, carpentry machine, industrial planer, planer 630 mm Machine type: Joiner-thickness planer (combination machine) Model: AD 635 Year of manufacture: 2025 Condition: New / showroom machine Location: Haldensleben – Shipping available from stock

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Cpodpfxjhkz E Te Afnju Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: new, Year of construction: 2025, CASADEI PF 520 M Tersa - Professional planer with 520 mm planing width and motorized adjustment of the planing table. large dimensioned jointer tables made of grey cast iron, hardened and tempered sturdy cast steel construction for precision and longevity the stable dressing fence is easily movable and offers a large supporting surface large dressing fence, inclinable 90° - 45 the inclination of the fence can be easily read from the workplace standard with auxiliary fence large four-blade shaft, precision bearing mounted smooth running due to precision unit and heavy cast iron construction powerful 7,0 kW (S6) motor maximum user safety with simplest operation Scope of delivery: PF 520 M Tersa Swivelling auxiliary fence TX-Matic planing shaft protection device Reinforced main motor 7,0 kW Technical data Total length of the planing tables 2960 mm Planing width 520 mm Dimensions planing fence 1100 x 160 mm Swivel range planing fence 90 - 45 Csdpeb D Sblsfx Afnjpu Max. chip removal chip removal 8 mm Planing shaft Ø / number of planing knives 120 mm / 4 pcs. Speed 5000 1/min Motor power 400 V / 50 Hz / P2 / S1 7,0 kW (9,0 PS) Suction nozzle diameter 120 mm Weight Location: ex stock Bitburg Immediately available

Condition: excellent (used), Year of construction: 2003, For sale is a used Felder planer-thicknesser AD7-31 with a planing height of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our professional staff (fully functional). Technical data: - Planing/thicknessing width: 310 mm - 4-knife cutterblock (reversible knife system) - Tiltable planer fence - Thicknessing height: 4–230 mm with handwheel and digital readout - Dual foldable planing tables - 2 feed speeds: 6 and 12 m/min - 5.5 HP (4 kW) motor, 400 Volt The planer-thicknesser is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer-thicknesser, thickness planer, Felder Cpsdpfeygg Rhox Afneu Reference: R-R00BE

Condition: excellent (used), Catalogue number 7797 TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm Cedpfx Asycikvofnopu - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb Cpodpexl Umyefx Afnsu - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake - Extractor connection diameter: 120 mm - Motor: 4 kW - Dimensions (L/W/H): 3010x1000x1400 mm - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Cpedpfou R Sztjx Afneu Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, Cpedpfx Afeu R Sz Tsnou planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, Cpsdpfx Afou R S Awonju feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Codsx U U Ekjpfx Afnepu Reference: R-A0117

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW Codswbz Huspfx Afnjpu - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence Cjdpfxoxbp Ans Afnspu - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: good (used), Year of construction: 1995, functionality: fully functional, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, Description SCM FS 520 – Jointer & Thickness Planer Combination Machine | Year of Manufacture: 1995 | Good Condition For sale is a robust and precise combination machine from SCM: SCM FS 520, year 1995, ideal for professional workshops and ambitious joiners/cabinet makers. The machine has been regularly serviced and is in good technical condition. Technical Data & Features: + Manufacturer / Model: SCM FS 520 + Machine Type: Combined jointer & thickness planer + Year of Manufacture: 1995 + Motor Power: 5.5 kW (three-phase) + Cutterhead: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknessing width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (2-speed) + Jointer table length: approx. 2200 mm (infeed & outfeed table) + Pneumatic table lift: Yes – facilitates switching between jointing & thicknessing + Electric height adjustment of thickness table with digital readout + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & Maintenance: + New compressed air unit/control + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables flat, bearings run smoothly + Immediately ready for use + No known repairs required Csdpfx Afsx Aibasnspu You will receive an invoice with VAT shown. Shipping via carrier possible by arrangement. Price: €7800 net ex stock Haldensleben.

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg Codpfewbdn Usx Afnspu ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Record Power PT 107 planer-thicknesser with a planing width of 265 mm. The machine is in original condition, so you receive the full warranty. Technical specifications: - Planing width: 265 mm - Planing table length: 1,110 mm - Max. planing depth: 3 mm - Tiltable fence up to 45° - Cutterblock diameter: 75 mm - Large 3-knife cutterblock - Speed: 4,000 rpm - Max. thicknessing height: 190 mm - Thicknessing infeed width: 265 mm - Feed speed, thicknesser: 5 m/min - Max. depth of cut, thicknesser: 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm - Weight: 162 kg One unit of this planer is available at both A-5431 Kuchl and A-8561 Söding, and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Cedpfx Afouv Exienepu Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Related terms: planer, thicknesser, planer-thicknesser, surfacer, thickness planing Reference: ZXPT107-A

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP Csdpfx Afsv Dah Djnepu - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm Csdpfx Afowqq Dhsnopu - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls Cpsdpfx Afex Swqkenou - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, planing height: 240 mm, planer shaft diameter: 125 mm, working width: 630 mm, type of input current: three-phase, – Manufactured in Poland by Jaroma – DTR technical documentation available TECHNICAL SPECIFICATIONS: – Shaft width: 630 mm – Knife shaft suitable for multiple resharpenings Cpsdpfx Ajw Ip Sqefnsu – Knife shaft diameter: 125 mm – Knife shaft rotation speed: 6000 rpm – Max. workpiece thickness: 240 mm – Adjustable rollers in the lower table – Motor: 5.5 kW – Electric height adjustment – Two feed speed options – Overall dimensions (L/W/H): 120 / 128 / 125 cm – Weight: 1060 kg

Condition: used, Thickness planer: Max planing width: 400 mm Cjdpexwvqdjfx Afnopu Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: excellent (used), CASOLIN TOPStar 530 12/24 thicknesser Technical specifications: Max planing width: 520 mm Max planing height: 300 mm Knife shaft diameter: 110 mm Number of knives: 4 pieces Feed speed: 5/8/12/19 m/min Electric lifting Csdpju T D Hqofx Afnjpu Extraction nozzle: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height:1280 mm