Used International 1255 for sale (9,642)

Condition: new, functionality: fully functional, SALVATORE ROBUSCHI RCC 32-20C cantilever pump – 5.5 kW – 15 m³/h Rcodpfxj Aa Dbys Akieh Industrial vertical cantilever pump by Salvatore Robuschi, equipped with a vortex impeller and FELM IE3 three-phase motor. Assembly includes a long immersion column, separate discharge pipe, mounting plate and guarded coupling. Designed for installation above a tank or sump. The cantilever construction requires no submerged shaft bearings or bushes. Suitable for various industrial liquids and solids-laden liquids, subject to material compatibility and operating conditions. Type: RCC 32-20C Serial number: 2010042272 Nameplate date: 06/2022 Nameplate duty point: 15 m³/h at 12.3 m head Motor: FELM FA3-132S-4, 5.5 kW Supply: 400 V delta / 690 V star, three-phase, 50 Hz Rated current: 10.9 / 6.3 A Speed: 1,450 rpm Efficiency class: IE3 Protection: IP55; insulation class F Pump casing in corrosion-resistant cast stainless steel CF8M (EN 1.4408, cast equivalent of AISI 316)

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Rcjdpo Abbidjfx Akish Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,520 kg, empty load weight: 2,480 kg, loading space volume: 30.5 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price available upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible when purchasing multiple containers. Europe-wide delivery possible upon request. Leasing/hire purchase options available. 1 unit available immediately in stock, RAL 7016. 2 units available shortly, other RAL colors available on request. Other versions and sizes available from stock in Paderborn. You can view our stock levels on our website. Roll-off container according to DIN. Technical description: * Internal dimensions: 6000 x 2350 x 2165 mm * Usable volume: 30.5 cbm * Tare weight: 2,480 kg * Floor: 5 mm Hardox 450 * Side walls: 3 mm Hardox 450 * Without bracing * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Standard ladder, bolted on, galvanized * Floor-side wall connection 45° * Warning markings according to DIN 67520 * Hook diameter Ø60 mm, S 355 * Hook height 1570 mm • Top frame, square tube * Net hooks • All moving parts lubricatable * Steel drain rollers 159 x 6.3, length 300 mm * Interior and exterior 2K epoxy primer, exterior painted with 2K polyurethane paint (80-100 μ) * Permissible total weight 15,000 kg * Container, storage container, roll-off container, hooklift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! Rcjdpfx Ake Abaivjish The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 1,238 kg, empty load weight: 2,652 kg, loading space volume: 29.9 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible!* 1 unit available in the short term; other RAL colors available upon request. Other designs and sizes available from stock in Paderborn. You can view our current stock on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 6000 x 2300 x 2165 mm * Usable volume: 29.9 cbm * Tare weight: 2652 kg * Floor: 5 mm S 235 * Side walls: 3 mm S 235 * Without internal supports, 1 longitudinal support (belly band) * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Standard ladder, screwed on, galvanized * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame: square tube 100x100x5 mm * Net hooks * All moving parts greaseable * Steel guide rollers 159 x 6.3, length 300 mm * Inside and outside: zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Rjdpfxe Abai Nj Akiech * Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, empty load weight: 2,190 kg, loading space volume: 20.7 m³, loading space width: 6,000 mm, loading space length: 2,300 mm, loading space height: 1,500 mm, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery is possible by arrangement. Rcjdpfxs Abakaj Akish Leasing/hire purchase options are available. 15 units available for immediate delivery; other RAL colors available upon request. Other models and sizes are available from our Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN 30722-1 Technical description: • Internal dimensions: 6000 x 2300 x 1500 mm • Usable volume: 20.7 cbm • Empty weight: 2190 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles are continuously welded • Double-leaf door with safety lock • Container tested and approved according to DGUV Rule 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Upper frame, round tube Ø 89 mm • Mesh hooks • All moving parts are greaseable • Steel guide rollers 159×6.3, length 300 mm • Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Empty weight 2,190 kg • Permissible total weight 15,000 kg • Container, storage container, roll-off container, hooklift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,973 kg, empty load weight: 2,027 kg, loading space volume: 16.6 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,200 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 4 units available in the short term, other RAL colors on request Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 6000 x 2300 x 1200 mm * Usable volume: 16.6 cbm * Tare weight: 2027 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * No internal supports * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Net hooks * All moving parts greaseable * Steel drain rollers 159 x 6.3, length 300 mm * Zinc phosphate primer inside and outside, painted on the outside with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg * Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustration purposes only! Rodpe Abah Sofx Akioch The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible.* 3 units, 6000 mm, in stock, RAL 7043 4 units, 6000 mm, in stock, with 10 stakes and 8 lashing eyes, RAL 7043 1 unit, 6500 mm, in stock, RAL 7043 1 unit, 6500 mm, available shortly, other RAL colors available on request 7000 mm available in approximately 4-6 weeks, RAL color on request Other designs and sizes available from our Paderborn warehouse. Redpfxe Aa Utaj Akiech You can view our current stock on our website. Roll-off container platform according to DIN Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal * Dimensions 6500 mm: 6500 x 2550 mm internal * Tare weight 6000 mm: 1,720 kg * Tare weight 6500 mm: 1807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 * Tear plate floor 5 mm S 235 * Including 8 lashing eyes in the floor, loadable up to 2.5 t * End wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, incl. testing according to DGUV rule 114-010 * Steel roller bearings 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and coated with synthetic resin paint * Permissible total weight 15,000 kg * Container, storage container, roll-off bin, hooklift container, jumbo container Subject to errors and prior sale. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 11,000 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 cm³ Combination TRS Cooling 2x Tailgate 6,000 km Top Condition Structure: Refrigeration and freezer unit, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-run ramp Cooling: TRS Carrier Iceland, electric, temperatures from -30 to +30 Date of first registration: ? 2023 TÜV (technical inspection): Mileage: 6,000 km Engine power: 355 kW (483 hp) 13 liters Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Loading area dimensions (L x W x H): 815 x 250 x 275 cm (internal) Truck dimensions (L x W x H): 1110 x 260 x 400 cm (external) Unladen weight: 13,812 kg Payload: 14,188 kg Permissible total weight: 28,000 kg Maximum load on the front axle: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Emission standard: Euro 6 E Suspension: Front parabolic, rear air suspension Axle configuration: 6x2 (FAR) Front tires: 385/65 R22.5 L50% R50% Continental Tires, Axle 2: 295/80 R22.5 L80% R80% Continental Tires, Axle 3: 385/65 R22.5 L40% R40% Continental Cab type: XG Extras: MX engine brake, auxiliary drive, air conditioning with climate control, auxiliary air conditioning, auxiliary heater, 9-ton front axle, refrigerator, luxury radio, 2 air-suspended seats, 2 beds, 2 x 600-liter tanks, 130-liter AdBlue tank, lift axle (not a steering axle), predictive cruise control, B3 alarm system, wheelbase 530 mm (axle 1 to axle 2), rear overhang 2.90 m, 360° camera, 45° cooling, fully insulated body by Ebo Rhoon, 5 rails on ceiling and floor, 1 horizontal load securing rail, stainless steel bumper on the body, LED lighting in the body, TRS Iceland cooling with EcoDrive and start-stop function, 2,000 kg Dhollandia sliding tailgate, pneumatic drawbar coupling, light and air connections, immediately available and ready for use, complete maintenance history, etc. Can be delivered in combination with the following products: DRACO TIPKAR EBO RHOON BOX TRS COOLING RAMP 24 CC Structure: Refrigerated/freezer unit Martini EBO Rhoon Manufacturer and type of chassis: Draco MZS 218 Cooling: TRS Carrier Iceland including EcoDrive and start-stop system Date of first registration: 09 ? 2023 TÜV: - Dimensions (L x W x H): 760 x 250 x 290 cm (internal) Adjustable drawbar length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg Rjdpfx Aozuitgokiech Permissible total weight: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-run ramp Tire size: 445/45 R19.5 Axle 1: L30% R30% Axle 2: L30% R30% Spare wheel for tipping trailer: 40 % Additional equipment: Length-adjustable drawbar (40 cm), Dhollandia 2-ton tailgate, ABS, EBS, SAF axles with disc brakes, chassis with mounting plate, wheel chocks, complete insulation EBO Rhoon, 5 stainless steel rails in floor and ceiling, 1 horizontal lashing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 °C to +30 °C (operation with 380 V or via the cooling of the tractor unit), attractive flat evaporator, various LED reversing lights, roadworthy, immediately available and ready for use, suitable for 24-CC, 14-block or 18-Euro pallets, etc. More information: * Maximum axle load | Second axle: 11,500 kg * Payload: 14,288 kg * Tail lift | Loading capacity: 2,000 kg * Tire size | Second axle: 295/80 R22.5 * Tire size | First axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inside left | Third axle

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 03/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 CC COMBI TRS COOLING 2x FLAP DOORS CAMERAS? EXCELLENT CONDITION Body: Refrigerated/Freezer, Ebo Rhoon Tail lift: 2,000 kg Dhollandia tuck-under lift Cooling: TRS Carrier Iceland, Electric, temperatures from -30 to +30 Date of first registration: ? 2026 MOT: Mileage: 638,000 km Engine power: 355 kW (483 hp) 13-liter Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3). 530 cm (axle 1 to axle 2) Load box dimensions (lxbxh): 815 x 250 x 275 cm internal Truck dimensions (lxbxh): 1110 x 260 x 400 cm external Unladen weight: 13.9 kg Payload: 14,107 kg GVW: 28,000 kg Max. weight on front axle: 9,000 kg GCW: 50,000 kg Color: H3279 Emission standard: Euro 6 E Suspension: Front parabolic, rear air Axle configuration: 6x2 Front tires: 385/65 R22.5 L90% R90% Michelin Axle 2 tires: 295/80 R22.5 L70% R70% Michelin Axle 3 tires: 385/65 R22.5 L30% R30% Michelin Cab type: XG Extras: MX Engine Brake, Motor PTO, Air conditioning with climate control, Auxiliary air conditioning, Auxiliary heater, 9-ton front axle, Refrigerator, Luxury radio, 2x air-suspended seats, 2 beds, 2x 600-liter tanks, 130-liter AdBlue tank, Last axle is a lift axle (no steering axle), Predictive Cruise Control, Alarm B3, Wheelbase is 530 (axle 1 to axle 2), Rear overhang of 2.90 m, Wide-angle camera, Rear-view camera on the rear of the load box, Connection for camera on the trailer, 45-degree cooling, Fully insulated body built by Ebo Rhoon, 5x rails against the ceiling and in the floor, 1x horizontal load-lock rail, Stainless steel scuff plate in the box, LED lighting in the box, TRS Iceland cooling with EcoDrive and start-stop, 2,000 kg Dhollandia tuck-under tail lift, Pneumatic fifth-wheel coupling, Light and air connections, Available for immediate delivery and use, Truck has always had a maintenance contract with DAF dealer Blom Katwijk, Complete maintenance history available, etc. Can be delivered in combination with: DRACO TRAILER EBO RHOON BODY TRS COOLING TAIL LIFT 24 CC Body: Refrigerated/Freezer Martini EBO Rhoon Chassis make and model: Draco MZS 218 Cooling: TRS Carrier Iceland incl. EcoDrive and start-stop system Date of first registration: 11 - 2022 MOT: 11 - 2026 Dimensions (lxbxh): 760 x 250 x 290 cm internal Adjustable triangle length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg GVW: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg tuck-under tail lift Tire size: 445/45 R19.5 Axle 1: L80% R80% Axle 2: L80% R80% Rodjzr Dflspfx Akisch Spare wheel for trailer: 100% Extras: Length-adjustable triangle (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, Scooped chassis, Wheel chocks, Fully insulated Ebo Rhoon, 5x stainless steel rails in floor and ceiling, 1x Horizontal load securing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 to +30 (runs on 380V or on the engine's cooling system), Nice flat evaporator, Various LED reversing lights, Ferry-compatible, Available for immediate delivery and use, Suitable for 24 CC, 14 Block pallets Further information: * Maximum axle load | Second axle: 11,500 kg * Payload: 14,107 kg * Tail lift | Load capacity: 2,000 kg * Tire size | Second axle: 295/80 R22.5 * Tire size | First axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inside left | Third axle: 40% * Tire tread depth inside right | Third axle: 40% * Wheelbase: 670 cm * Tire tre

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,423 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: gas, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, empty load weight: 3,059 kg, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rcsdpfe Aa En Ijx Akish Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, interior mirror, driver protection canopy standard, fabric seat cushion, clipboard with LED lighting, RedSpot front and rear, dual pedal

Condition: used, Weiss Rsdpozh D Rmjfx Akijch Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Redpfjzclxvox Akisch Coating testing Material testing Quality assurance Automotive industry Research and development Condition Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Rjdpfxjzd Udpj Akisch Safety Workstation The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V, 9 A, 2010 W Condition: used / like new (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Rsdpfxozimgts Akioch Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. Rsdpfxozh U Sbs Akiech The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Rodpezgci Ejfx Akioch Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Rcodpozhlr Eofx Akieh Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, BT   Model PPS 1200 MX / 1 Rodsziivdjpfx Akisch   The BT PPS 1200 MX / 1 is an electrically powered high-lift pallet truck from the manufacturer BT, designed for internal material handling. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities.   Key technical features   Load capacity: 1,200 kg   Lifting height: approx. 2,700 mm   Fork length: approx. 1,150 mm   Drive: 24V electric drive   Battery: 24V   Model from 1999   Operating hours: approx. 356 hours   The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase.   Battery renewed in October 2022.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Rsdpfx Ajzgcgdekisch Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See images as shown) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Rcedpfozgclmsx Akioh Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Rcodozii Akspfx Akieh Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. Rcjdpfx Ae Ad Hcuokish The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0047 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. A second identical machine is also available. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Redpfo Ad Iy Isx Akioch Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CITIZEN CINCOM R 04 VI is a CNC automatic lathe / Swiss-type lathe designed for high precision, accuracy and reliability. It features 6 axes and 2 spindles, max. turning diameter 4 mm, max. turning length 40 mm, internal spindle diameter 9 mm, max. threading diameter 3 M. Main specs: up to 20000 t/min, spindle power 0.5/0.75 kW; tool-holder count 3 with 15 stations; turning tools 5, drilling tools 4, transverse tools 2; tool shank 8 mm; counter-operation 4 tools. Voltage 50 Hz 3x400 V; machine weight ≈850 kg; dimensions L1485×W560×H1410 mm. Accessories: LNS TRYTON 107 Hybrid bar feeder, parts catcher, coolant system, lamp. Ensures tight tolerances; suited to watchmaking, medical, automotive, aerospace and precision components. Rcjdpfxszv I D Ho Akioh

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Rodpfez Dvztjx Akisch