Used Gmx 400 Linear for sale (20,859)

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Bedpfsz S Nbwox Afmeww Control module with switch and indicator lights CEE power plug

Condition: excellent (used), Year of construction: 2004, LEISTRITZ RT 400-CCA Thread Rolling Machine Manufacturer: Leistritz Thommen GmbH, Switzerland Model: RT 400-CCA Machine Type:Thread Rolling Machine Year of Manufacture: 2004 Serial Number:1028 Country of Manufacture: Switzerland Technical Specifications Bwedpsz Rzx Ssfx Afmow Rolling Capacity - Maximum rolling force: 40 tons - Minimum shaft length: 125 mm - Maximum shaft length: 275 mm Rolling Die Dimensions For Ø69.85 mm tooling: - Minimum rolling die diameter: 176–178 mm - Maximum rolling die diameter: 215 mm For Ø80 mm tooling: - Minimum rolling die diameter: 176 mm - Maximum rolling die diameter: 210 mm Electrical Specifications - Power supply: 3 × 400 V - Frequency: 50 Hz - Rated power: 65 kW - Main fuse: 125 A - Control voltage: 24 V DC - Spindle power: 22 / 20.5 kW Hydraulic and Pneumatic System - Hydraulic operating pressure: 270 bar - Compressed air pressure: 6 bar - Hydraulic unit manufacturer: CYMAX AG, Switzerland - Hydraulic unit type: IHS240-DD10-IT75/55+18/270-9.2-A783.1 - Hydraulic oil tank capacity: 240 liters - Hydraulic reservoir capacity (auxiliary): 60 liters - Hydraulic pump flow rates: 75 / 18 / 40 l/min Machine Dimensions and Weight - Approximate dimensions (L × W × H): 3,400 × 2,900 × 2,200 mm - Machine weight: 4,900 kg Equipment - Two-spindle thread rolling arrangement - Hydraulic rolling system - CYMAX hydraulic power unit - Coolant and filtration system - Additional spindle pair for Ø69.85 mm and Ø80 mm tooling (subject to confirmation) Control - PLC control system - Control system retrofit reported in 2019 (subject to confirmation)

Condition: used, Prints labels and applies them straight away This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height. According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture. Bwedpfsz Ndccex Afmew Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Print and apply labeller Print method: Thermal transfer (ribbon) Application: Blow applicator (air) Construction: On column with conveyor, height adjustable

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, This 3-axis MAHR Compakt 400 was manufactured in 2001. It features optical and tactile measurement functionality, allowing for precise measurement of rotationally symmetrical components. The machine includes a rotary axis with a Sanyo Denki motor drive, a 6-position probe change rack, and multiple probe configurations. If you are looking to get high-quality measurement capabilities, consider the MAHR Compakt 400 CMM machine we have for sale. Contact us for further details. Bwjdpfx Afoz E Hz Hsmow - Last Known Calibration: 2019- 4th axis: rotary axis- Included Equipment / Scope of Delivery:* 1 Screen / Monitor* Lens with 6x Ring Light* Lens with 10x Ring Light* Calibration plate with setting ring and calibration sphere (probe-to-camera alignment)* Rotary axis (with Sanyo Denki motor drive and 3-jaw chuck unit)* 6-position probe change rack (Renishaw MCR20)- Capabilities & Features:* Optical and tactile measurement functionality* Measurement of rotationally symmetrical components* Multiple probe configurations/geometries supported (straight and star probes)- Documentation: Factory calibration certificates and service reports available

Condition: used, Year of construction: 2002, functionality: fully functional, CNC lathe Gildemeister Type: CTX 420 V6 Linear Year of manufacture: 2002 Serial number: 02260000631 Control system: Siemens PowerLine Technical data: Working area: Max. swing diameter over X-axis guide 680 mm Swing diameter over X-axis guide 565 mm Chuck diameter 200/250 mm Travel in Z-axis 260 mm Travel in X-axis 635 mm Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter in the front bearing 120/90 mm Spindle bore 79/57 mm Bjdpoz I T Avofx Afmsww Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool carrier Number of tool stations 12 Tool interface according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30 ° 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Speed max. 4500 rpm C-axis, main spindle/counter spindle Speed range 0-250 rpm Torque 200/120 Nm Speed during point positioning 0.025 degrees Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max 70 bar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually Bsdsz Inbyspfx Afmjww With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: excellent (used), CATALOGUE NUMBER 7794 TECHNICAL DATA - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2 pcs Bjdpfx Aez Nhi Uofmsww - automatic reversing – with adjustable settings - screen dimensions 50x50mm - toothed draw roller (bottom) 1.5kW - toothed draw roller (top) 1.5kW - main motor power 30kW - feeding table with vibratory feeder / vibratory feeder length 3900mm - vibratory feeder width 500mm, 1.5kW - receiving conveyor length 5000mm - conveyor belt width 380mm - hopper with discharge chute for chips 2500x3020x2200mm - platform 4650x750x1770mm - machine dimensions with conveyor and vibratory feeder (length/width/height) 8900x1200x2550mm - weight approximately 6000kg ADVANTAGES - automatic reversing with adjustable settings - with 3900mm vibratory feeder – with 5000mm conveyor - German production – very good condition – used shredder Net price: 88900 PLN Net price: 20674 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 1991, Optical Profile Projector PRAZIS PO-400-VD Bwedpfx Afjz H Iw Sjmjw Year of construction: 1991 Useful table dimensions: 260 x 240 mm Scale axis X - Y + scale on W axe Diameter of the projection disc: Ø 400 mm Supplied with: 1 optical magnifier 10 x 1 optical magnifier 20 x 1 optical magnifier 50 x Length: 1000 mm Depth: 900 mm Total height: 1700 mm Weight: approx 400 KG

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Bwsdsz H Ixiopfx Afmjw Class 2 Weight: approx 2 T

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable Bwjdjz Ny Ddspfx Afmew - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,600 h, functionality: fully functional, spindle bore: 107 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, controller model: Siemens 810D, Equipment: chip conveyor, TECHNICAL DETAILS Maximum swing diameter: 680 mm Swing diameter over X-guide: 565 mm Longitudinal travel: 1,300 mm Cross travel: 315 mm Spindle head: h5 Spindle diameter at front bearing: 150 mm Spindle bore: 107 mm Maximum torque: 600 Nm Spindle speed: 4,000 rpm Chuck diameter: 315 mm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool turret for: 12 tools Driven tools: 12 Tool holder: VDI 40 Quill stroke: 120 mm Quill taper: MK 5 Bwedsz N Aauspfx Afmew MACHINE DETAILS Control system: Siemens 810D Dimensions & Weight Machine dimensions with chip conveyor (L x W x H): 5,700 x 2,600 x 2,210 mm Machine weight: approx. 10,000 kg Operating Hours Power-on hours: 47,781 h Spindle hours: 11,600 h EQUIPMENT Hydraulic steady rest, clamping range 30-245 mm Chip conveyor KNCS-N 315-91 power chuck

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, CNC lathe GILDEMEISTER CTX 420 linear With Heidenhain ELTROPILOT 4290 control system Year of manufacture: 2003 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Sliding guard with internal lighting 12-station turret Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic chuck SMW Autoblok 0 250 mm Foot switch for chuck + tailstock adjustment Bwede Aazxvspfx Afmsw Oil mist extractor Coolant system Operating manuals

Condition: used, mileage: 205,593 km, power: 132 kW (179.47 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 2,160 kg, maximum load weight: 1,340 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 13 m³, loading space length: 3,420 mm, loading space width: 2,050 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), navigation system, onboard computer, soot filter, traction control, Nissan NV400 180dci with Refrigeration - Refrigerated cargo compartment - Thermo King V300 MAX refrigeration unit - Power outlet - Sliding doors - Automatic transmission - Air conditioning - Cruise control - ABS/ASR/ESP - Air conditioning - Navigation system - Rearview camera - 2 seats - EURO 6 - Payload: 1,340 kg - Tires: 225/65R16 Very good condition, German vehicle, export price. Yourtrucks Group Bwedj Aaz D Ejpfx Afmew The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, mileage: 474,000 km, power: 294 kW (399.73 HP), first registration: 09/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro5, loading space length: 5,500 mm, loading space width: 2,480 mm, loading space height: 750 mm, Equipment: ABS, air conditioning, crane, Scania P 400 flatbed truck with HIAB crane, remote-controlled/steerable axle, and sideboards, Euro 5 . For inquiries: 1026905 * Condition: very good * Power: 294 kW / 400 hp * Engine displacement: 12,740 cm3 * Euro standard: Euro 5 * ABS * EBS * Differential lock, rear axle * Auxiliary drive * Hydraulics * Electric windows, driver/passenger * Electrically heated and adjustable mirrors * Electric sunroof * Multifunction steering wheel * Radio / CD / AUX / USB * Reversing camera * Air-suspended comfort driver's seat, driver/passenger * Seat heating, driver * Automatic climate control * Fog lights * Steerable axle * Lift axle * Duomatik system * Rotating beacon on the roof Body: Flatbed * Sideboards, aluminum Load compartment dimensions: * Load compartment length: 5,500 mm * Load compartment width: 2,480 mm * Load compartment height: 750 mm Crane: HIAB - 166 E 4 Hipro, Year: 2012 * Remote control Tires: Bwedpfxoz Tattj Afmow 1st axle: 315 / 80 R 22.5, 35% tread, leaf-sprung 2nd axle: 315 / 80 R 22.5, 35% tread, air-sprung 3rd axle: 315 / 80 R 22.5, 30% tread, air-sprung, lift axle, steerable axle ----Price: 33,900,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors, and prior sale are reserved.

Condition: used, mileage: 192,000 km, power: 175 kW (237.93 HP), first registration: 04/2009, fuel type: diesel, empty load weight: 6,400 kg, maximum load weight: 5,590 kg, overall weight: 11,990 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, next inspection (TÜV): 07/2027, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, short cab, 1 air seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), auxiliary drive, differential lock, long-range headlights, work lights, rotating beacon, leaf suspension, air/light/hydraulic trailer hitch, aluminum tank, low-noise G1, winter service equipment, green environmental badge. Bsdpfx As Aay E Ijfmjww Wheelbase: 3080 mm, Body: Unimog with MULAG roadside mowing unit MRM 300 (reach approx. 3m), MULAG slope mowing unit SB 500 (reach approx. 6.1m) & MULAG grass collection trailer MHT 800 approx. 20m³, follow-up gearbox with work unit, hydrostatic drive with variable motor, DC-8-speed reversing gearbox UG100, fully synchronized, cruise control, permanent all-wheel drive, longitudinal differential lock, electropneumatic reversing gear, DIN 76060, size 3, type B front mounting plate, PTO shaft front and rear, two-circuit proportional hydraulic system, hydraulic system 3-cell, hydraulic quick couplings front, 4-way, cell 1 + 2, pressure line front for 2nd hydraulic circuit, separate return line front, hydraulic quick couplings rear, 4-way, cell 2 + 3, pressure line rear for 2nd hydraulic circuit, separate return line rear, snowplow relief, operating hours approx. 16,408 hours. - MULAG grass collection trailer MHT 800 approx. 20m³ - MULAG roadside mowing unit MRM 300 (mowing head approx. 2005 operating hours) - MULAG slope mowing unit SB 500 (mowing head approx. 5346 operating hours) The unit will only be sold as a complete set, including attachments! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 400V, 50Hz, 9.8kW, 15A Bjdpfx Aj Aaaqqofmjww Weight: 130 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, Equipment: documentation/manual, Wittmann Portal Robot Type: W 420-544 Stroke lengths (mm): X-500 AS STANDARD Bsdpj Aacm Uofx Afmjww Y-1000 AS STANDARD Z-2000 AS STANDARD c: 90 PNE

Condition: used, Year of construction: 2011, Manufacturer: DMG GILDEMEISTER, Type: NEV 400, Year of manufacture: 2011, Operating hours: 39,722, Spindle hours: 12,928, Control system, Manufacturer: Siemens, Type: Sinumerik 840D, 21" operator terminal ERGOline, Touchscreen, 3-jaw chuck, Tool turret, 12 tool positions, Center distance 805 mm, Turning length 650 mm, Travel X/Z/Z 255 x 800 x 680 mm, Chip conveyor Bjdpfx Ajz Tlfzefmoww +++ ATTENTION! This machine is part of an online auction! +++

Condition: good (used), Year of construction: 1988, functionality: fully functional, Burkhardt & Weber portal milling machine, year of manufacture 1988 / overhauled in 2008, Siemens Sinumerik 840 D control system, travel range X/Y/Z 4000 / 2800 / 800 mm, dual pallet changer, clamping area 1810 x 3025 mm, vertical clearance 1220 mm, horizontal clearance 2250 mm, Bwedpfez Tnzxsx Afmow 173-position tool changer / tool magazine, two-stage gearbox, swivel boring and milling head, high-pressure coolant system, chip conveyor, 3D measuring probe.

Condition: used, Year of construction: 2012, Manufacturer: ZOLLER, Model: Smile 400, Year of manufacture: 2012, including evaluation unit, touch screen monitor, multi-function device, manufacturer: Brother, model: MFC 9465CDN, label printer. Bjdpfx Afoz Tpw Usmoww +++ Attention: This item is part of an online auction! +++

Condition: good (used), Year of construction: 1994, For sale: Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. In good working condition. Bwsdpfx Aez Sk E Sjfmew

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, The machine comes from the current production line and has always been serviced by Tschudin. The feeding system and polishing machine are included. Bedpfxjz Iihnj Afmoww

Condition: used, Technical details: diameter: 400 mm width: 160 mm Bwsdpfxeu Nlh Rj Afmsw weight of the machine approx.: 159 kg revolution per minute: 3000 U/min Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken *

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Bedpfxju Nlpbe Afmjww Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Bwsdpfju N E Abex Afmjw *