Used Tos Sui 50 for sale (34,249)

Condition: good (used), TOS SUI 50/2000 lathe - Max. turning diameter: 560 mm - Distance between centers: 2000 mm Lodpfx Amsy D Ecljpjaa - Spindle bore: 58 mm - Year of manufacture: 1990 Rapid traverse on longitudinal and cross slide

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150150900039, center width: 1,500 mm, overall weight: 2,820 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lodpfx Aew Hwursmpsaa Working area Centre distance: 1,500 mm MACHINE DETAILS Weight: 2,820 kg EQUIPMENT various lathe chucks

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW Lodpfx Amjymfazspsaa 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min Lodexp Rzbopfx Ampsaa feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Ledpfxsyx U T Ae Ampoaa Table diameter: 500 mm Table bore: 120 mm Bore depth: 650 mm MACHINE DETAILS Weight: 5,200 kg

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Lodpewnhy Iefx Ampeaa Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller Lasdpfxjyyy Ius Ampsa – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, height of centers: 250 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 500 mm spindle boring: 56 mm spindle retainer: Gr. 8 retainer taper tailstock: 6 MK spindle speed: 11,2 - 1400 rpm forwarding feed: längs/plan 0,027-3,8/0,013-1,9 mm/U thread pitch: 0,5 - 36 mm Laodpfxsuritbo Ampea electrical connection: 380 V, 2 x 5,5 kW space needed: 3600 x 1250 x 1300/1600 mm weight: 3000 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer Lasdpjy Edl Uefx Ampsa - Operator console protected against chips and coolant - Workpiece cover

Condition: used, x-travel 850 mm y-travel 500 mm z-travel 500 mm Lajdeyuqmcspfx Ampsa taper ISO 40 P.D.B. table-size 400x1250 mm volt 400 V Control Heidenhain TNC 355 total power requirement 7,5 kW

Condition: used, x-travel 1100 mm y-travel 500 mm z-travel 600 mm Lodpoyuqfrefx Ampeaa taper ISO 40 P.D.B. table-size 500x1250 mm volt 400 V Control Heidenhain TNC 410MA total power requirement 10 kW

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t Laodpfx Ajd N Smhempea +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Lajdpfxewvht Rs Ampsa Type: HUR 50 Year: 2015

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Lasdpfsfg Ep Dsx Ampea Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1988, functionality: fully functional, In well-maintained condition Ledpfeyvurtsx Ampjaa

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : Laedpsu Tvdbefx Ampja 210 - 370 mm 365 - 520 mm Only available as a set

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm Lasdpfx Aotv Iklempsa swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT Laedpfx Amswvhxgopsa - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Lajdpfx Aopy A Iujmpea Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Ljdpoxvfwkjfx Ampoaa Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 670 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,440 rpm, spindle speed (min.): 1,440 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,620 mm, total width: 3,475 mm, total length: 3,200 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, rotational speed (min.): 18 rpm, table load: 1,200 kg, overall weight: 6,500 kg, workpiece weight (max.): 1,200 kg, bed width: 630 mm, Console Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Control Panel Axis Digital Readout Complete Overhaul Performed in 2025 Warranty: 12 months Availability: IMMEDIATELY AVAILABLE CONDITION OF A NEW MACHINE – COMPLETE OVERHAUL Lajdpfjxp Itbjx Ampsa IN GEOMETRICAL ACCURACY ACCORDING TO MANUFACTURER’S SPECIFICATION FGSV 50 – Technical Data: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 3,200 mm Overall width: 3,475 mm Overall height: 2,620 mm Total weight: 6,500 kg Total power consumption: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Cross travel Y-axis: 670 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,440 rpm Spindle motor power: 15 kW Max. spindle torque: 2,000 Nm Feed range X – Y / Z: Number of steps / range: 16 / 10 – 1,800 / 2.5 – 450 mm/min Rapid traverse: 4,000 / 1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,200 kg Details of the performed overhaul available upon request.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Lasdoxpugnjpfx Ampoa Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Parameters: Laedpfxsdqp Euj Ampsa Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm Lajdpfjiqtzkex Ampja

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Laedpfx Asyhhn Djmpoa Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible