Used Olimpic K 400 for sale (49,701)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls Dodpfx Aqj Ah Simevscp • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Dcodozv Tibspfx Aqvjp Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) Dodpfx Aqsrx S Ipjvjcp OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Dodezbc Edspfx Aqvecp Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Year of construction: 2016, condition: good (used), 1 x Ilpra Skin Packer Dodpfjz Ehb Uex Aqvscp 400 Overskin Serial Number: FP10346 Year: 2016 Vacuum gas traysealer With mould included: D13 tray 239 x 167mm. Suitable for MAP. 3 Phase

Year of construction: 2022, condition: good (used), 1 x Ilpra Skin Packer Dcodpfx Aqoz Ehcrjvjp Model: FP 400 Roto Skin Serial Number: FP12195 239 x 167mm D13 Suitable for MAP and Skin packing. 3 Phase

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min Dsdpfx Asttakhsqvscp - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Dodpfxew Nadge Aqvjcp Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. If you have any questions or require further information, please feel free to send us a message or call us. Dodpfxozmxxie Aqvecp

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 120234, total length: 1,100 mm, total height: 1,900 mm, total width: 800 mm, overall weight: 850 kg, For sale is a Kaltenbach saw: Type: KKS 400 H. This cold circular sawing machine was purchased by us in 2018 after undergoing a complete overhaul and has been in our possession ever since. In 2021, Profiltec performed a modification regarding the control system. Siemens PT-S7-1214 FC/EcoCut 84729080 (Siemens S7 1200 PLC operating software EcoCut). The net costs for the control system modification amounted to approximately €3,900. The sale includes two roller conveyors (1 left and 1 right) and two used saw blades. The saw is ready for operation and can be demonstrated under power after prior consultation. Technical data: Type: Saw KKS 400 E Year of manufacture: 1999 Operating voltage: 400 V Frequency: 50 Hz Roller conveyor left = 3000 mm Roller conveyor right = 6000 mm with length stop Weight 850 kg Dimensions W/L/H 800-1070-1050 mm Saw blade diameter standard 400 mm Saw blade types: HSS solid steel saw blade HSS segmented saw blade Saw blade mounting according to DIN 8576 Mounting bore 50 mm Number of drive pins 4 pieces Pitch circle of drive pins 80 mm Diameter of drive pins 13 mm Saw blade feed speed infinitely adjustable 0-1000 mm/min Rapid return 3300 mm/min Rotary table adjustment manual – infinitely adjustable +/- 90 degrees Cutting speed with 400 mm blade diameter two-stage with chain 10/20 m/min or 13/26 m/min or 15/30 m/min two-stage with toothed belt: 30/60 m/min Electrical connection value two-stage with chain 1.8/,2.7 kW Djdj Ah H Hvspfx Aqvscp Electrical connection value two-stage with toothed belt 3.7/4.7 kW Terms of sale and delivery: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. Technical specifications according to available documents. Subject to prior sale. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Dodpfx Aszuyk Neqvjcp Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm Dcjdpfszcpixjx Aqvop - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Djdpfx Aqstxtzkevecp Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: reconditioned (used), Year of construction: 1991, A Kaltenbach cold-cut saw is for sale. The machine has been completely disassembled and reassembled. During the overhaul, the gearbox, motor, and hydraulics were refurbished. The table was resurfaced and fitted with new bearings. The gearbox is free of play! Type: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse in/out: 1,550 mm/min Maximum workpiece size: 130 mm Workpiece size for square material: 120 mm Workpiece size for flat material: 305 x 20 mm Workpiece size for round material: 130 mm Minimum workpiece size: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Dcedpfxj Ahz Dxj Aqvop Shipping possible upon request. Forklift available for loading.

Condition: reconditioned (used), Year of construction: 1993, For sale is a Kaltenbach cold-cutting saw. Gearbox is free of play! Dcodpj Ahzb Esfx Aqvjp Type: KKS 400 EC E Year of manufacture: 1993 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working range: 130 mm Working range for square material: 120 mm Working range for flat material: 305 x 20 mm Working range for round material: 130 mm Minimum working range: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions L x W x H: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase. Dsdpfxevw I Nie Aqvscp

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, For sale is a Kaltenbach saw, type: KKS 400 E, first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. Included in the sale are two roller conveyors (1 left and 1 right) and two used saw blades. It is fully operational and can be demonstrated under power after prior arrangement. Type: KKS 400 E Year of manufacture: 2008 Equipment number: Operating voltage: 400 V Frequency: 50 Hz Control voltage (DC): 24 V Valve voltage (DC): 24 V Total rated current: 9 A Supply line fuse: 16 Roller conveyor left = 5000 mm Roller conveyor right = 6000 mm with length stop Technical data saw KKS 400 E Weight: 820 kg Dimensions W/L/H: 800-1070-1780 mm Saw blade diameter: Standard 400 mm Saw blade types: HSS solid steel saw blade HSS segmented saw blade Saw blade mounting according to DIN 8576 Mounting bore: 50 mm Dsdpfe Adqtdox Aqvjcp Number of drive pins: 4 pieces Pitch circle of drive pins: 80 mm Diameter of drive pins: 13 mm Saw blade feed speed Continuously adjustable: 0-1000 mm/min Rapid return: 1550 mm/min Rotary table adjustment: manually – continuously +/- 90 degrees Cutting speed with 400 mm blade diameter Two-stage with chain: 10/20 m/min or 13/26 m/min or 15/30 m/min Electrical connection value two-stage with chain: 1.7/2.6 kW Documentation: Original operating manual is complete. EC declaration of conformity available. Note: The machine is only sold as a complete package together with the two roller conveyors. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical data according to available documents. Subject to prior sale. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. Dodpfx Aqsyvac Asvecp 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Dcodpfx Asi A Ix Hoqvjp

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Dcodpfsx Daw Uex Aqvjp Multicyclone Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Year of construction: 2013, condition: like new (used), We are offering 2 units of this new Selmi Tank 400 chocolate melting tank, manufactured in 2013. Dsdozvagyjpfx Aqvecp Manufacturer: Selmi Model: Tank 400 Year of manufacture: 2013 Condition: like new Machine type: Chocolate melting tank If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, mileage: 655,805 km, power: 294 kW (399.73 HP), first registration: 09/2014, fuel type: diesel, tire size: 355/50 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, electric window regulation, parking heater, power mirror, General information Year of construction: 2014 Registration number: 93-BFD-3 Dedpfe Ah Hgtex Aqvecp Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Front axle: Tyre size: 355/50 R22.5; Max. axle load: 8000 kg Rear axle: Tyre size: 295/80; Max. axle load: 11500 kg Weights Empty weight: 7.267 kg Carrying capacity: 12.233 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 06/2027

Condition: used, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Year of manufacture: 2017 Colour: Grey - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Dcedpoyll Snofx Aqvop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Used Automatic Edgebander for sale! Manufacturer: SCM Dcodpjya Tv Rjfx Aqvsp Model: Olimpic K1000 Year of manufacture: 2007 Status: dismantled and ready for transportation immediately! Location: Lithuania Equipment and technical specifications Edgeband thickness max 8 mm Panel thickness max 50 mm Thickness of coiled edgeband max 3 mm Workpiece length min 65 mm Feedrate max 18 m/min

Condition: new, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm Dcedo Ahvv Nopfx Aqvep CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank