Used Gear Test for sale (17,067)

Condition: ready for operation (used), LIEBHERR - LORENZ S800 / Gear Hobbing Machine Rodpfxeyl Slhj Aa Usp - Well-maintained machine with extensive accessories - 1x pallet / change gears - 1x pallet / hobs - 1x pallet / arbors - DOCUMENTATION - Max. workpiece length with tailstock 600 mm - Max. workpiece length with retracted tailstock 800 mm - Max. traverse of milling slide 360 mm - Maximum pitch cut on largest workpiece 5 PI / in standard range 8 PI - Spindle taper – milling spindle MK 5 - Milling arbors 22 / 27 / 32 / 40 mm - Max. milling diameter 186 mm - Max. milling cutter length 170 mm - Max. cutter shift 80 mm - Milling speeds 40 – 220 rpm - Infinitely variable feed rates / horizontal - Infinitely variable feed rates / vertical - Infinitely variable feed rates / tangential - Clamping table without coolant trough 550 mm - Clamping table bore 100 mm - Arbor taper MK 5 Dimensions (LxWxH): 3.6 x 1.8 x 1.9 meters / Weight: 5,000 kg Errors and omissions excepted.

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force Redpfxjyc R R Ds Aa Ujp - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rodpfx Aaownib Ts Uep Lukas van Rossum

Condition: used, offer consists of: SPF-20 - gear / equipment for smaller sizes used Redpju Sr A Tsfx Aa Uop We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27506, Complete overhaul in 2009 Rjdpfjxtpg Rsx Aa Usp CNC gear hobbing machine Pfauter PE 150 Serial number: 27 506 Year of manufacture: 1991 – complete overhaul in 2009 CNC control: SINUMERIK 840 D

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Rjdpfx Aoxw N Uvja Uep Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm Redpfsw A Am Sex Aa Uep --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Cross table ----- 600 x 190 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - foot ----- 1180 mm Weight ----- 390 kg Rsdjq E N Uxspfx Aa Uep INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 o/min Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Drilling table ----- 540 x 470 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - base ----- 1180 mm Weight ----- 320 kg Redsq E N U Hopfx Aa Ujp INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 Rsdex N Nc Topfx Aa Ujp weight of the machine ca. 0,9 t dimensions of the machine ca. 1,8 x 1,4 x 1,4 m

Condition: used, functionality: unexamined, Ferwood Code: RU0011862 - Manufacturer Code: 4-070-01-0901 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 9KG, 46X39X27 Rjdpjylbccofx Aa Usp

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Rsdpjyl S Eusfx Aa Uep

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Rodpfjyhngtsx Aa Ujp

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Rodpfxsycvd No Aa Uep Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Rsdpfx Asycvdiea Usp Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Rodpfxsv Huihe Aa Usp

Condition: used, functionality: fully functional, Rotary testing machine for testing transformers 8 stations Testing stations for: Rodpfx Aaoyl Adzj Uep voltage, input/output current (mA), high voltage, pad printing Test adapters for all common EI transformers included

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations Rjdpfxjyc H N Nj Aa Ujp ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm Rodpfx Aevi Ninja Usp gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer -Number: 7 available Rodpfob A Ivzsx Aa Uep -Price: per piece

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: mm Rodpjx Ea Ipofx Aa Uop gear width: mm weight of the machine ca.: 7000 kg dimensions of the machine ca.: 9130 x 3895 x 3450 mm max. top circle diameter: 80 mm max. length of teeth cutting: 170 mm Total length: 240 mm taper diameter: 32 mm slide travel radial ( X-axis ): 100 mm slide travel tangential ( Y-axis ): 160 mm axial movement Z-axis: 300 mm/min workpiece spindle - bore: 45 mm electr. connected load: 44 kVA

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 300 mm gear width: 110 mm max. module: 6 weight of the machine ca.: 10,5 t * Rjdpsxz Aw Eefx Aa Uep

Condition: used, Year of construction: 2014, Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. Redpfx Aextbmija Usp *

Condition: ready for operation (used), The Klingelnberg KNC 60 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the process of milling spiral-toothed bevel gear sets. Rodpfx Aovyd Ndea Uep Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Usable cutter head radii 55, 100, 135, 170, 210 mm Machine weight Approx. 16,000 kg Dimensions (L x W x H) 5750 x 2800 x 2700 mm *Image shows the machine in its current condition as a used machine and can be offered on request, partially modernized, or as a retrofit completely modernized with a new CNC control (SIEMENS ONE).

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear planing machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the gear shaping of straight-toothed bevel gears with a short run-out. We still have 1 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear milling machine, can also produce crowned bevel gear sets in high quality. Technical data Workpiece diameter: 315 mm Redpfx Aaeup T Rlo Uop Module max.: 10 mm Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7,000 kg *Information and data are non-binding and subject to prior sale Viewing under operating conditions possible after consultation.