Used Haas Sl 20 for sale (223)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 508 mm, turning diameter: 330 mm, spindle speed (max.): 3,400 rpm, center width: 610 mm, TECHNICAL DETAILS Swing diameter: 330 mm Turning length: 508 mm Swing diameter over bed: 585 mm Swing diameter over cross slide: 241 mm Spindle speed: 3,400 rpm Bar diameter: 63 mm Distance between centers: 610 mm Travel in X-axis: 214.6 mm Travel in Z-axis: 508 mm Tool holder: VDI 40 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Djdpfx Acj Ah H Itsyswd Dimensions: 2,800 × 1,800 × 1,800 mm Machine weight: approx. 4,100 kg EQUIPMENT Bar feeder Servo Bar 300, 1.5 m 3-jaw chuck Collet chuck Tailstock Various tool holders

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Turning length 508 mm Spindle speed 3,400 rpm Tool holder VDI 40 Distance between centers 610 mm Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Dwedpoz Stgqsfx Acyed Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 - 3-jaw chuck - Collet chuck - Tailstock - Various holders

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,323 h, functionality: fully functional, machine/vehicle number: 3075777, spindle speed (max.): 4,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 508 mm, center width: 508 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter over bed: 584 mm Turning diameter over slide: 241 mm Distance between centers: 508 mm Travel in X-axis: 215 mm Travel in Z-axis: 508 mm C-axis: Available Spindle speed: max. 4,000 rpm Tool positions: 10 pcs. MACHINE DETAILS Control system: Haas Dimensions and weight Dimensions (L x W x H): 2,550 x 1,850 x 1,830 mm Weight: 4,000 kg Dwedj Aidwdepfx Acysd Shipping packages: 1 pc. Operating hours: 1,323 h EQUIPMENT Three-jaw chuck C-axis Powered tools Turret CE marking

Condition: used, Year of construction: 2008, HAAS SL - 20 LATHE, YEAR FIRST INSTALLATION: 2008 TURNING LENGTH: 508 mm TURNING DIAMETER: 262 mm TRAVELS: X: 203 mm Z: 508 mm BAR CAPACITY: 51 mm Dwedpfx Aceyzzw Teyjd NUMBER OF TURRETS: 1, 10 POSITIONS SPINDLE SPEED: 4,000 RPM CHIP CONVEYOR

Condition: used, Year of construction: 2007, turning diameter 250 mm turning length 500 mm control FANUC Dwedjzvq Diepfx Acysd tool taper VDI 40 weight of the machine ca. 3,0 t HAAS SL-20THE CNC Lathe – Year 2007 Technical specifications - Max. turning length: 500 mm - Max. turning diameter: 250 mm - Swing over bed: 584.2 mm - Swing over cross slide: 241.3 mm - Distance between centers: approx. 609.6 mm - X-axis travel: 214.6 mm - Z-axis travel: 508 mm - Spindle nose: A2-6 - Spindle bore: approx. 76.2 mm - Max. spindle speed: 4,000 rpm - Spindle motor power: 14.9 kW / 20 HP - Driven/live tool stations: up to 10 - Input voltage: 360–480 V - Power supply: 3-phase

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Year 2008 Control Haas Chuck 10” Djdpfxowbd Hqs Acyjwd Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HAAS VF-8/40 was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-8/40 vertical machining centre we have for sale. Contact us for further details. CNC control • Haas CNC control, Classic generation • 15-inch color LCD • USB port • Program memory: 1 MB (with memory lock keyswitch) • Remote jog handle with colour displayAxis travels and feed rates • Spindle nose to table: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Max cutting feed rate: 12.7 m/minWorktable • Table size: 1626 × 914 mmSpindle • Taper: 40 taper • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tappingTool changer • Side-mounted tool changer, 40 positions • Tool-to-tool: 2.8 s • Chip-to-chip: 3.6 sCoolant and chip management • Through-spindle coolant (TSC): 20 bar, 22 L/min • Programmable coolant nozzle • Coolant system with pull-out tankProbing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface with internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead (3-axis interpolation) • 4AXD fourth-axis preparation (connections and wiring; rotary table not included) • APC-READY pallet changer preparation (additional functions, macro support and wiring; pallet changer not included)Machine features • Ball screw thermal compensation • Fully enclosed machining area (sliding front doors, hinged side windows) • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting Additional equipment Dwsdpfx Aco Aig Shjyod • Screw-type chip auger • ACF additional coolant filtration unit, 25 µm • CABCOOL CNC control cabinet cooling unit • 24x through-spindle coolant-compatible toolholder pull studs

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, total height: 2,000 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Dwsdpfxsyar Thj Acyod Technical Machine Benefits • Turning diameter over bed: 762 mm • Tool turret vdi: 12 tool positions • Turning length: 860 mm Extra Information Machine still under power Dimensions Machine Depth 3300 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 68517, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, center width: 991 mm, center height: 254 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle bore: 89 mm Spindle speed: 0–3,400 rpm Center height: 254 mm Distance between centers: 991 mm Swinging diameter over bed: 533 mm Travel X-axis: 287 mm Travel Z-axis: 864 mm MACHINE DETAILS Power: 22.4 kW Drive: CNC Control system: Haas Dodpj Aidvysfx Acyewd Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,150 x 2,400 mm Weight: 5,000 kg EQUIPMENT Tool magazine: 12 positions Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes Dwjdpfxjzy Npfs Acyod MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON Dedpoz Ehxyefx Acyjwd ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment Dwsdpfx Aox D Ezfjcyod • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, overall weight: 4,000 kg, controller manufacturer: HAAS, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details. Dsdez Ha Upspfx Acyewd • Chuck size: 8.3 in / 210 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (BOT turret): 13.00 in / 330 mm • Max cutting diameter (BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 2.50 in / 64 mm • X-axis rapid rate: 945 ipm / 24.0 m/min • Z-axis rapid rate: 945 ipm / 24.0 m/min • X-axis max thrust: 4,100 lbf / 18,238 N • Z-axis max thrust: 5,100 lbf / 22,686 N • Spindle nose: A2-6 • Spindle drive system: Direct speed, belt drive • Spindle max torque: 150.0 ft-lbf @ 500 rpm / 203.0 Nm @ 500 rpm • Spindle bore: 3.50 in / 88.9 mm • Turret stations: 12 stations (VDI 40) • Boring bar rear clearance: 4.00 in / 102.0 mm • Coolant tank capacity: 55 gal / 208 L • Coolant pump: 1 HP / 0.75 kW variable-flow (45 L/min @ 2 bar) • Air requirement: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Air pressure minimum: 80 psi / 5.5 bar • Air line / coupler size: 3/8 in • Low voltage electrical: 220 VAC (3 phase), 40 A full load • High voltage electrical: 440 VAC (3 phase), 20 A full load (internal non-isolated transformer 380–480V included) • Shipping dimensions: 143 in x 90 in x 92 in / 362 cm x 229 cm x 234 cm • Control system: Haas NextGen Control with touchscreen interface, 1 GB memory, Ethernet, Wi‑Fi, HaasConnect Remote Monitoring, and Haas Drop • Included machine features/options: Automatic Tool Presetter; Programmable Hydraulic Tailstock (MT4); Rigid Tapping; M130 Media Display; Safe Run; Power Failure Detection Module; Visual Part Programming System Additional equipment • Belt-type chip conveyor • Chip strainer filter kit (200 micron) Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Djdpfx Acez N Spljyewd Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A Dwsdpfx Aezvq Dvscyjd - Full-load current: 40 A - CNC control: FANUC Features - 12-position tool turret - VDI-40 tool holder - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Dwjdpjvwz T Ujfx Acyod

Condition: excellent (used), Year of construction: 2022, operating hours: 1,173 h, functionality: fully functional, machine/vehicle number: 1190817, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Haas VF-2SSYT + TRT160 + URC-12 Fanuc robot cell Dwodpo Aiii Tefx Acyod SMTC-30-40T-HS | WIPS-R | CT | 12K-40T-IN | AUGER NGC | 1GB | ETHERNET | WIFI | EPFDM | HAAS CONNECT | TOUCH SCREEN 4AXD | 5AXD | DWO/TCPC 55GAL | VARIABLE FLOW CLNT | P-COOL | TSC1K | ACF CHIP STRAINER | OIL-SKIMMER | COOLANT REFILL | MIST CONDENSER HSM

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Dwodpfxoy Hvp Io Acyjd

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation. Dedpfx Acjzwxz Eeyswd

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Dwodpfx Asx U D Etecyed Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment Dwedpfjzhwlqjx Acyjd • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 29,800 W, overall weight: 11,000 kg, number of axes: 3, This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details. • Swing over bed: 1,016 mm • Swing over cross slide: 635 mm • Max. bar capacity: 101.6 mm • C-axis: Full-featured C-axis • Tool presetter: Yes • Spindle nose: A2-8 • Spindle bore: approx. 116.8 mm • Gearbox: 2-speed • Chuck: Kitagawa B-15, 3-jaw • Vector drive: 40/30 HP closed-loop vector drive • Electrical enclosure: NEMA Type 1 (indoor use only) • Voltage: 360/480 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A Dwjdpfx Acoz Ryqmeyjd • Largest load: 70 A • Short-circuit interrupting capacity: 10,000 A • Machine status: Dismantled, not under power; seller can load on truck with crane for approx. €800 Additional equipment • Iscar Fast Feed Tools tooling/solutions (as indicated by stickers) • Work light • Coolant tank and chip tray assembly • Foot pedal control • Status beacon light Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, controller manufacturer: Haas, total height: 2,500 mm, total length: 3,500 mm, total width: 2,800 mm, table width: 450 mm, table length: 1,200 mm, overall weight: 6,000 kg, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, A Haas VF3 CNC vertical machining center is available. X/Y/Z axis travels: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, maximum table load: 1500kg, rapid traverse rate: 25m/min, feed rate: 16m/min, number of tool positions: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. On-site inspection is possible, and the machine can be powered on. Dwedezu Dfdopfx Acyjd

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dodpfezu Nphox Acyswd Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HAAS, This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10" chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information. Dwodpfx Acjx H Uzveysd • Tailstock • 12 x VDI40 • Toolsetter • Conveyor