Used Beam Saw for sale (11,487)

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Machine/vehicle number: CH 03/32/32 PLUS, Cutting length (max.): 3,200 mm, Cutting height with scoring (max.): 50 mm, Cutting height (max.): 50 mm, Cutting width (max.): 3,200 mm, Total length: 6,500 mm, Total height: 1,950 mm, Total width: 5,100 mm, Homag Optimat CH03 Plus Cuts 3200mm x 3200mm x 50mm Thick Foot print approx 5.1m Wide, 6.5m Deep, 2m High. Being the ‘Plus’ model it has the grippers/clamps to take in sheets for cutting unlike other models of same age. 3 x front air floatation tables Comes with all guards etc Very neat and tidy machine, always got what it needed. We are the second owner from new. Previously used for cutting corrugated plastic for signage company. Has had an easy life. Only cutting chipboard since 2022. A lot of money recently spent to ensure accuracy of cutting square. All is now perfect, comes with spare blades and ready to work. Machine was still in everyday use up until May 2024, with no issues. Change of circumstances forces sale. Original Engineer decommissioned machine, and is available to recommission machine anywhere in Ireland if required Cg8Ftehrh0 Asking price: € 6,950 + VAT Open to reasonable offers for quick sale due to storage

Condition: good (used), Functionality: fully functional, Cutting length (max.): 3,200 mm, Cutting width (max.): 3,200 mm, SCM Sigma 65 Beam Saw. 3,2m x 3.2m. Main Saw & Scoring Saw. Used for strip cutting engineered flooring panels. Photos available on WhatsApp. Ca2Nf9Uv3S Price: Ex.works, Burrowbridge, Somerset.

Year of construction: 2007, Condition: used, Used machine Year of construction 2007 well maintained condition Equipment and technical data: Cutting length mm 4,400 Program slide travel mm 4,300 Number of collets 6 Feed rate max m/min 70 Feed stepless Yes Zvchp8Fq Saw blade projection mm 82 Saw blade diameter max mm 350 Main motor kW 11 Scoring unit Yes with 3 air cushion tables 1800 mm Label printer Yes Optimization Yes HOLZ-HER angle pressing device Yes with 2-stage groove height adjustment with angle cutting device Control and software: - HOLZ-HER CUTCONTROL 2 - HOLZ-HER EASY-PLAN CE mark Yes Availability: approx. end of October/beginning of November Location: Munich

Condition: like new (used), Year of construction: 2013, -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly Bgkegtds -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, Year of construction: 2005, Beam saw SCM Gabbiani Galaxy 85 Dpebhf Year of construction 2005 Serial number: GA1/002481 Software: WinCut Optimization program: Cutty Cutting dimensions: 3200x3200mm Max cutting height: 85mm Saw blade 350mm Speed of carriage 60-135 m/min 400V Weight 3100kg

Condition: used, Machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Dpjd8V Main saw blade projection: 135 mm

Condition: good (used), Year of construction: 2011, Operating hours: 24 h, Functionality: fully functional, Machine/vehicle number: 6279/11, Feed length X-axis: 4,300 mm, Feed length Y-axis: 4,300 mm, Feed length Z-axis: 80 mm, Feed rate X-axis: 100,000 mm/min, Feed rate Y-axis: 100,000 mm/min, Power: 9 kW (12.24 HP), Year of last overhaul: 2024, Automatic beam saw Felder automatic 75 year of production 2011 cutting size 4300x4300mm Bm9Zqsf2Ywu ARDIS optimisation barcode printer

Year of construction: 2000, Condition: good (used), Pressure beam for circular saw for clamping panels or veneers E2Owuoe for 3 m sliding carriage

Year of construction: 1994, Condition: used, Pressure beam for Martin sliding table saw T 72 A year of construction 1994 Cq2Rvoykhu suitable for pneumatic clamping of veneers or thin boards for 3 m sliding carriage Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2004, Functionality: unexamined, Machine/vehicle number: 5696, Cutting length (max.): 4,200 mm, Overall weight: 5,000 kg, Compressed air connection: 6 bar, Saw blade bore: 30 mm, Equipment: Scorer, Mayer pressure beam saw type PS8 from 2004. Delivered in 2004 by our company and recently traded in (March 2024) when we delivered a brand new Mayer machine. Used in interior work. Complete with scoring saw diameter 127mm. Side-pressure roller 8 pneumatic clamps The PC computer has been changed in recent years for a modern and powerful version with Windows 10/11PRO. This makes the machine very suitable for modern workshop networking/setup already open for modern devices incl. USB C Printer was also renewed to modern Zebra type - see photos. Paohrkprdt MAYER PC5400 software with label printing approval KEB controller for saw height and feed (combined) renewed in 2022. Complete protective fence/hoods available! Available immediately, dismantled from the Barneveld location. EXW Barneveld - free loading into your truck

Condition: used, Year of construction: 2000, Beam saw BIESSE SELCO Selco EBL 110 Year of manufacture 2000 Cutting capacity 4450 x 4300 mm Main saw motor 15kW 110 mm saw height Scoring saw motor 2kW 200 mm scorer B9So3Qoefb Installation dimensions 7110x7900mm

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Bjm20Xqtqf0 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Year of construction: 2023, Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: AE00003779, GABB IANI ST115 HIGH PERFORMANCE HORIZONTAL BEAM SAW WITH PLATFORM 102030 European safety regulations (CE norms) for Gabbiani PT/ST 1 R02209 gabbiani st 115 (45) 1 OF0457 MAESTRO ACTIVE Human-Machine interface software (HMI) 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 990061 PC ENGLISH LANGUAGE 1 590153 Electric cabinet with air conditioning device 1 580457 Fixed air floating table with fence 2500x600 mm with rollers and enlarged fan 1 580458 Mobile air floating table 2500x600 mm with rollers and enlarged fan 3 590146 Double automatic side alignment device 1 590211 Different pressures on clamps and pressure beam 1 301230 Start/Stop cycle pedal 1 590180 Prismatic guides with recirculating ball screws for version 45 1 G20045 20 Hp (15 kW) - 50Hz main blade motor with star-delta start 1 450500 Carriage with independent raising of main sawblade and scoring blade 1 G00169 Optimised blade/pressure beam stroke with selflearning + rod lock (not with "HI-TRONIC") 1 590195 Automatic measures of panel size 1 450206 Execution of grooves with manual height setting of main blade 1 590217 Grooves execution, sawblades carriage (feed/return) 1 590017 Extra clamp each 4 590237 Rear table with wheels, squaring side 1 590198 Platform with powered feed rollers for bilateral (right/left) loading 4300/4500x2200mm with rollers, 400 mm centre-to-centre distance 1 590199 Additional rollers, 200mm centre-to-centre distance 1 590200 Rear opening to allow the fork lift passage 1 590268 Side roller conveyor module 2 205008 Uninterrupted power supply unit for PC 1 590044 Compact label printer - Labels printing with bar code 1 590261 Cut editor 1 590263 Maestro Cut Manager 1 Bolpeok9Mnp 590264 Maestro pattern import 1 590097 Maestro optiwise - Advanced - no. 1 license 1 590274 Maestro connect: 1-year subscription service (kit Gateway "plug&play" included) 1 083317 WOOD BLOCKS 1 109991 Machine language: ENGLISH 1 Item number: GABBIANI ST115 Configuration: R014601 Certification model type: SM02 Serial number: AE00003779

Year of construction: 2007, Condition: used, Used machine Year of construction 2007 Version fence left, cutting length 3250mm, cutting width 3850mm, cutting height 85mm Saw blade diameter: main saw 350mm, scoring saw 180 mm ø Pneumatic pressure beam, adjustable pressure force Compressed air requirement 32 L/min / 6 bar per cutting cycle Switchable clamp pressure, from the control panel for sensitive panel materials. panel materials. Automatic cutting length limitation (sawing unit recognizes the end of the workpiece) Residual cutting device, clamps retract into recessed pressure beam. Width stop with precise rack and pinion drive 6 workpiece clamps in floating design, compensate for material tension. Dppfpp Cutcontrol 2 control unit with 15 TFT display, Windows 2000 operating system Floppy disk and DVD drive Control functions direct cuts or via optimized orders CP-OUT data import module (interface: customer-side) Production data acquisition for the necessary maintenance of the machine. EASY-Plan optimization software Graphical user interface with real-time display Parts list data: Element number, item number, piece, length, width Material data: Material length / material width / material thickness Number of pieces available Rotatability (grain) Material designation Type number Trimming Unlimited input of parts list data OPTI-PRO software Module for data transfer:Import of parts lists from user programs (carpentry package) and as CSV file Main saw: 11 kW, scoring saw: 2.2 kW Grooving device with 2 groove height settings Angle pressure device, left 2 air cushion tables with blower Equipment: Automatic central lubrication Feeding rollers on the support table Cutting unit Postforming unit (incl. scoring unit) Angle cutting unit Automatic scoring saw adjustment Sizing and trimming unit with 3 automatic stop positions CUTCONTROL 2 control unit with 15" TFT display with touch screen operation Manual control unit for remote control of the machine Label printer TLP 2742 Postforming circular saw blade ø 250 mm Availability: approx. November 2024 Storage location: Hesse

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Bezyalt0H9 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Year of construction: 2011, Condition: used, Used machine Year of construction: 2011 4572 operating hours Equipment and technical data: Cutting length: 4400 mm Cutting width: 4300 mm Bpzlamlj Collets: 5 pcs. Double finger collets: 2 pcs. Machine table completely air-set incl. postforming unit Feed: infinitely variable up to max. 100 m/min. Saw blade projection: 82 mm Saw blade diameter max.: 350 mm Main motor: 11 kW Scoring unit adjustment: motorized Incl. grooving device Incl. label printer Incl. cutting optimization Incl. angle press device controlled Incl. 1 pcs. Angled support table 2400 mm air-guided Incl. 3 pcs. support table 1800 mm air-pressed incl. 4 ball-bearing mounted castors on the side incl. 3 lateral rollers with ball bearings Incl. cut-out device incl. manual control unit incl. central lubrication incl. angle cutting device Weight approx. 6500 mm Location: Belgium Availability: by arrangement

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Jtxd28Gy Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Year of construction: 2022, Condition: new, Exhibition machine Year of construction 2022 Equipment and technical data: cutting length 3100 mm Air-cooled machine table Design stop side left Modular design of the basic machine for perfect adaptation to your space and cutting requirements Sawing cycle away from the fence, great time saving with more than 25 % more cycle speed Air-cooled machine table plates Width stop Positioning speed before 25 m/min according to CE (extension direction) Width stop return 60 m/min (feed direction) Steel pressure beam fixes the panels in the desired position. The pressure beam is stable and torsion-free Infinitely adjustable pressure force Residual cutting device in the pressure beam Width stop cutting width 3100 mm Welded steel construction - absolutely stable and torsion-free guided on a linear guide. Positioning via direct drive on rack and pinion drive on both sides rack and pinion drive (king shaft) Measurements are taken without contact via a magnetic tape system the opening dimension of the collets is max. 70 mm Sliding door on the right (standard without surcharge) A double sliding door provides access to the rear of the machine. The sliding door moves on precise linear guides. There is space for up to 6 Euro pallets in the rear machine area under the roller conveyors. The perfect access for maintenance and cleaning work in the rear area of the pressure beam saw Angled air cushion table and fence 1800 mm Table size 1800 x 600 mm, permanently mounted. For protecting the panel surface and easy handling when moving and turning the materials 2 support air cushion tables 1800 x 600 mm 3 loading rollers at the front Saw carriage with steel-reinforced toothed belt drive, guided on surface-hardened linear guides The unique smooth running of the saw carriage is achieved by the double-sided suspension. The light sensor mounted on the unit has two impressive features: firstly, it detects the end of the flap and optimizes the travel paths, and secondly, it measures the panel length and transmits this measurement to the width stop; this creates advantages for automatic trimming and series cuts Main saw motor 7.5 kW Saw projection max. 68 mm Saw carriage feed speed from 0 - 60 m/min electronically controlled, infinitely variable via the control panel Return speed 70 m/min - very short idle times Scoring motor 2.2 kW Automatic cutting length limiter with blow-off device for cleaning the cutting length sensor Single Press pneumatic, program-controlled angle pressing device infinitely variable up to 1200 mm Workpiece clamps - floating suspension fully equipped with 7 pieces Visible Cut Line - the exact cutting line is displayed here with a laser beam Bko87Iyezjg CUTCONTROL 2 central control unit Multitouch 21.5" full HD screen 16:9 format Wireless keyboard and mouse Control panel & multi-touch screen can be swiveled ECO-MODE time-controlled switch-off of the drive and control components for energy saving incl. evaluation of energy efficiency Manual control unit for remote control and easy operation of the machine Label printer and software for

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 3250 Useful stroke of the pushing system (mm) 3300 Bsklstv7He Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Year of construction: 2024, Condition: new, New machine Year of construction: 2024 Saw unit can be tilted up to 46 Pressure beam, incl: LED lighting with 3 different action colors: - WHITE: Machine in idle position - RED: Pressure beam is lowering or emergency stop function - BLUE: Saw unit is moving Telescopic fence extendable up to 3,400 mm with 2 digital displays, for setting all 3 folding fences 4 parallel motorized width stops on 2,000 mm wide support table wide support table, dimensional adjustment up to 1,300 mm Automatic fence tilting variable support table 800 x 200 mm scoring system by means of main saw blade in synchronization Automatic workpiece length detection for minimum travel distances Mobile and height-adjustable control panel, incl: - Touchscreen control panel with cutting plan generation - Saw blade stand - Template holder - Emergency stop button, start button, grooving/scoring selector switch Sawing/scoring/sawing, rotary switch for feed speed - Switch for laser (optional) - USB socket Technical data: Cutting length: 3,200 mm Max. Saw blade projection: 100 mm at 90°, 72 mm at 45° Saw blade: diameter 300 350 mm, bore 30 mm Saw blade rotation: 4,000 rpm Motor: 5 kW (= 7.5 HP) Feed speed: 0 40 m/min. Total length: approx. 4,270 mm Weight: from approx. 1,150 to 1,550 kg (depending on equipment) Required air pressure: 7 bar Suction nozzle: 1 x 100 mm, 1 x 120 mm Accessories / equipment: Cutting line laser Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start-up Mitre fence +/- 50° tiltable with length compensation including 2 folding fences Pre-load Location: Hochheim Availability: Short term D7Tyldg

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Yvk3Cc Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Year of construction: 1995, Condition: used, Used machine Year of construction 1995 cutting length 3800 mm Cutting width 4050 mm Saw blade projection 105 mm Cutting height approx. 90 mm Main saw blade diameter 400 mm Bore diameter 75 mm motor 9 kW Scoring saw blade diameter 160 mm Bore 45 mm motor 1,1 kW Saw carriage 5-60 m/min Feed pusher 0.4/20 m/min Pusher return 20 m/min Compressed air 5-6 bar Crw7U9X7Dt Consumption 20-30 l/min Weight 4700 kg Machine only suitable for rough cutting Price applies to takeover ex location at the time of dismantling Availability: short term Location: Röllbach

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Xtoljmm2 Rear pusher With No. 8 clamps / grippers Max. cutting width (mm) 4250 Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 95 Max clamps opening (mm) 90 Scoring Unit (max. diameter saw) mm 300 Main Sawing Unit (max. diameter saw / power) mm 350 - Kw 15 Adjustable speed of the saw carriage (m/min) 5 - 120 No. 3 Front supporting tables with Air blowing system Total power (Kw) 21

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Bhicvcjg Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 Bh2W0Mtwwv YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000