Used Haas Mini Mill for sale (221)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Giodpfxswkrq Ae Ai Nou Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm Gedpfszbh U Dex Ai Neiu • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant Giedpfx Aowzyd Eei Nou system, Rigid Tapping, Tooling & Manuals Control: HAAS Spec: Travel X406 Y305 Z254 mm | 8000RPM | BT40 Accessories: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: good (used), Year of construction: 2007, Haas Minimill Gisdpfeza D I Djx Ai Neu Year 2007 BT 40 RPM 6,000

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1110809, HAAS Mini Mill 2 CNC Machining Center – Year of Manufacture 2014 For sale: a HAAS Mini Mill 2 CNC vertical machining center from 2014. This compact and versatile machine is suitable for precision machining of small to medium-sized workpieces and is widely used in machine building, component manufacturing, and general machining. Technical specifications: Manufacturer: Haas Model: Mini Mill 2 Year of Manufacture: 2014 Control: Haas CNC Control Travel (X/Y/Z): approx. 406 x 356 x 508 mm Tool changer: 10-position Taper: CT40 Coolant system included Special features: The machine was taken out of production approximately three years ago and has not been used since. It was fully operational before being decommissioned. The control system has the latest available Haas software update. The machine is offered complete, including standard equipment and tooling. Condition: The machine is in good optical and technical condition. Due to the period of inactivity, an inspection and functional test are recommended before putting it back into service. Godpfjzai T Sox Ai Neiu Applications: Ideal for milling, drilling, tapping, and general CNC machining of steel, aluminum, plastics, and other materials. Availability: The machine is available immediately. Inspection by appointment is possible. Please contact us for additional information, photos, or a price quote.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 4,006 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HAAS Mini Mill was manufactured in 2015. It features a maximum spindle speed of 6,000 rpm and a factory-raised Z-axis providing additional clearance for 4th axis applications. The machine has an X-axis travel of 406 mm, Y-axis travel of 305 mm, and Z-axis travel of 456 mm. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Table size: approx. 914 × 305 mm • Machine options/features: • 4th axis drive/preparation • Rigid tapping Gisdpfx Aey Tamwei Nju • Upgraded coolant pump • Factory raised Z-axis by +100 mm (additional clearance for 4th-axis applications) Additional equipment • Haas HRT160 simultaneous 4th axis (rotary table) • 4x LANG MakroGrip 77 vises • 4-axis fixture/cradle for the 4 vises Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, 20 Station ATC, Gjdpjyw R Hpofx Ai Neiu coolant.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Gsdpfxox Afpgs Ai Noiu Enclosed guarding Manual

Year of construction: 2007, condition: ready for operation (used), Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 10000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible. Gijdpfsu T Rg Dox Ai Neu

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): Gsdeyhfltepfx Ai Neiu • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Gijdpjy Idpxjfx Ai Nou

Condition: excellent (used), Year of construction: 2012, Haas Minimill Year of manufacture: 2012 Taper: BT 40 Spindle speed: 10,000 rpm Video available! Gsdpfx Aiey Smyuj Nsiu

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, Giedpfx Aieyt Hbgo Nju 20Hp spindle motor, Spindle Speed 6000rpm, HAAS Control, 20 Station ATC, Coolant

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). Godpfx Aijzc Ih Ts Noiu With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Gsdpfjzc Id Uex Ai Njiu With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Gisdpfxszc Idho Ai Nju

Condition: like new (used), Year of construction: 2018, Swing over bed 641mm, 229mm max. machining diameter, 356mm cutting length, 6000rpm spindle, 44mm bar capacity, 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, Gedpfxjy U Hpbs Ai Nsiu C axis & Milling, HAAS control, 3 jaw chuck, coolant, Tool Setter,

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, Giedpfsy Tkabsx Ai Nou 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1087278, SPECIFICATION Table size 1321mm x 457mm X axis traverse 1270mm Y axis traverse 508mm Z axis traverse 635mm Spindle BT40 Spindle speeds 0-12000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 40 + 1 tools Approx. weight 6033kgs MACHINE EQUIPPED WITH: - HRT 210 4th axis Through spindle coolant Swarf auger Lighting Guarding Manual Gjdozbhn Rspfx Ai Noiu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Giedpfx Aijyrrx Ue Neu Lighting Enclosed guarding

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, total height: 2,870 mm, total width: 2,489 mm, table load: 794 kg, overall weight: 5,443 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, product length (max.): 3,734 mm, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2017. It features impressive travels of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes a robust table size of 1,321 x 457 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1,321 x 457 mm • Spindle drive: Inline direct-drive • Tool changer: 30+1 side-mount • Max tool diameter (full / adjacent empty): 64 / 127 mm • Max tool length: 279 mm • Rapid traverses (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Cutting feedrate: 21.2 m/min • Coolant system: Flood coolant • Through-spindle coolant (TSC): Yes • Coolant tank capacity: 208 l Godpfxjzc I I Hs Ai Njiu

Condition: used, Haas TM2 CNC Toolroom Milling Machine, Table Size 270x1460mm, CAT 40 Tooling with 10 pcs of tooling, Machine Vice and collets, Travels, X-1016mm, Y-406, Z-406mm, Year 2007, Serial No 1061737 Gjdpfx Ajx Rcbroi Nsiu Specifications: X: 40" Y: 16" Z: 16" Power: 7.5 hp RPM: 4,000 RPM # ATC: 10 Taper: CAT-40 Table-W: 10.5" Table-L: 57.75"

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg Godoypv T Rjpfx Ai Nsiu

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS VF-3SS was manufactured in 2015. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,219 x 457 mm and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details. Gisdpjzcxihjfx Ai Nou • Table Dimensions: 1,219 × 457 mm • Number of T-Slots: 5 • Spindle Taper: CT40 • Maximum Torque: 122 Nm @ 2,000 rpm • Maximum Rapid Traverse (X/Y/Z): 35.6 m/min • Tool Changer Capacity: 24 positions • High-Speed Machining: Included • Memory Capacity: 1 MB • Display: 15" LCD monitor • Interface Ports: USB, Ethernet • Tapping: Rigid tapping • Number of Axes: 5 (3 linear axes + Haas TR160Y dual-axis rotary table) Additional equipment • 4th-Axis Drive and Wiring: Included • 5th-Axis Drive and Wiring: Included • Rotary Table: Haas TR160Y dual-axis tilting rotary table • Through-Spindle Coolant (TSC): 21 bar • Programmable Coolant Nozzle: Included • Auto Air Blast: Included • Lubrication System: Minimum Quantity Lubrication (MQL) system • Coolant Tank Oil Skimmer: Included • Chip Conveyor: Screw-type chip auger

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40 Gisdezcnzmopfx Ai Neu