Used Force for sale (6,215)

Condition: used, maximum load weight: 31,335 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 01/2026, loading space volume: 92 m³, Equipment: ABS, Sliding floor trailer with conical trough design, 92 m³ volume, 385/65 tires, ABS, ESP, 3x9 t SAF B9-22S Intradisc CD IO37 axles with 22.5 inch (430 x 45) disc brakes, ET 120 2040/1200; 9 t BPW SRBF Eco Air axle with 22.5 inch Eco Disc TS2 disc brakes ET 120; Wabco braking system with control box; lift axle on the first axle; automatic raising and lowering / starting aid controlled via EBS; Rectus 26KA air connection; 6x steel rims 22.5x11.75 inch ET120; Europoint 3 Hybrid lighting; 2x LED work lights mounted inside, in the upper corner of the front wall; floor: aluminum, 21-plank, 8 mm, smooth surface; hydraulic connection at front wall; radio remote control; ladder on the right of the front wall or on the front wall door; 12 pairs of lashing rings embedded in the side floor profiles in pairs; 2x round 80 mm bows (not swiveling) + 1x round 50 mm front + 1x round 50 mm rear; wear plates left/right at the rear section inside, aluminum 1250x2500x3mm; 2 rail cleaners made of plastic, attached to the carriage with a chain; plastic toolbox; roll tarp with tension belt; foldable A-board (rear side in body color white); side underrun protection with plastic plate; Rollfix. Bsdpezp Tgtjfx Ac Aswr

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg Bsdpfxehkz Hmo Ac Aewr - available immediately - Subject to prior sale.

Condition: good (used), Inert gas welding machine, inert gas device, welding rectifier -without wire feed Bodob Uhu Rspfx Ac Aowr -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm Bodpfx Ajg Sxyvoc Ajwr -Weight: 30.2 kg/box

Condition: good (used), Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. RMS -Dimensions: 1/95/H95 mm -Weight: 0.7 kg Bjdpeldk H Aofx Ac Aswr

Condition: good (used), Year of construction: 2017, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module -Manufacturer: Lenze, L-force Power Supply Module power supply module Bedpfx Aoxm S I Rec Aowr -Type: E94APNE1004 -Dimensions: 510/210/H290 mm -Weight: 13.6 kg

Condition: good (used), Year of construction: 2019, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module, servo converter, servo converter -Manufacturer: Lenze, L-force Multi Drive HighLine servo inverter -Type: E94AMHE0044 Bjdpfx Acsxm Tauj Aowr -Expansion modules: E94EYAB / E94AYM43 / E94AYFLF / E94AYCER -Number: 9x inverters available -Price: per piece -Dimensions: 460/60/H290 mm -Weight: 4.0 kg/piece

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell, tensile force bearing -Manufacturer: ASA-RT -Product: Force measuring bearing type ATB-RP030/600 -Dimensions: 80/65/H20 mm Bwodpfx Aofmm Dfjc Asr -Weight: 0.6 kg

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell Bedscdcn Hepfx Ac Ajwr -Manufacturer: Johann Rein -Type: 1Mp -Dimensions: 190/290/H130 mm -Weight: 4.5 kg

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: Bwsdpfx Acey S Rqwj Aor 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Bodpozfy Ivjfx Ac Aewr Technical Data Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Year of construction: 2010, condition: excellent (used), Tension testing device manufacturer: Prema Bedpfxjfd Encj Ac Aowr max. pressure: 100 MPa clamping diameter: 220 mm weight: 12 kg

Condition: new, HBM Piezoelectric Force Measurement Ring 1-CFW/140kN New piezoelectric force measurement ring from HBM. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HBM (Hottinger Baldwin Messtechnik) Type: 1-CFW/140kN Device type: Piezoelectric force measurement ring Measuring principle: Piezoelectric Rated force: 140 kN Available quantity: 1 piece Bjdezcg Daspfx Ac Aswr

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers. Bwedpfjyh Az Aex Ac Aor All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: used, functionality: fully functional, Main Technical Specifications Machine Model: COMDEC LV 50-40 PFT horizontal baling press Pressing force: 50 tons Horizontal hydraulic baler for cardboard, paper and industrial waste Electrical data Power supply: 380 V / 3 phase / 90 A Hydraulic motors: 2 × 22 kW hydraulic pump motors Conveyor pump motor Hydraulic system Hydraulic main cylinder: 180 / 150 × 2000 mm Hydraulic pressure control system with oil cooling and filtration Oil tank with pressure and return filters Machine dimensions Total machine length: approx. 8,394 mm Width: approx. 1,920 mm Height: approx. 3,104 mm Functional equipment Automatic wire tying system Bale length control system Hydraulic wire twisting unit Automatic bale ejection system Conveyor control cabinet and electrical automation system Noise level Bsdey Uddispfx Ac Aswr Working noise level below 70 dBA

Year of construction: 2005, condition: used, Apple engineering MM975 Mini Force Feed Depositor Bwodpfsb Ucqljx Ac Aor Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Condition: used, Electronic crane scale MWT, Type 142 Manufacturer's No.: 142571 Year of manufacture: 1993 Tension force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Bwsdpfxjg D H Rij Ac Ajr Smallest measured value: 20 kg Power supply via 12-volt battery - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare weight via remote control - Memory for measured values (weights) - Printer for measured values Very robust and high-quality steel housing Weight: approx. 200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, compressed air connection: 16 bar, total width: 500 mm, total length: 550 mm, total height: 1,000 mm, overall weight: 96 kg, input voltage: 230 V, warranty duration: 24 months, 💥 NozziTec X-Force M Dry Ice Cleaning Machines – New & Immediately Available! A - QUALITY 💥 Dry ice blaster / Cold Jet Quality Are you looking for top-quality industrial cleaning technology for your business? We offer brand new NozziTec X-Force dry ice cleaning machines. NozziTec is a leading manufacturer with more than a decade of experience in dry ice cleaning technology — machines engineered for maximum efficiency, reliability, and safety. 🛠️ Why choose NozziTec X-Force? ✅ Professional quality: Premium Polish craftsmanship featuring robust construction and high-end components; ideal for demanding industrial environments. Bwsdeyf Aaijpfx Ac Asr ✅ Durable & reliable: 24 months warranty and excellent support. ✅ Efficient & clean: Clean surfaces without water or chemicals — fast, sustainable, and environmentally friendly. ✅ Versatile application: Perfect for maintenance, production cleaning, renovations, or thorough degreasing in workshops, industry, and technical services. 📌 Optional: Full range of accessories, nozzles, blast hoses & service kits available. 💼 Ideal for, among others: 👉 Injection molds and dies 👉 Industrial machines & production lines 👉 Removal of paint, grease, oil, and fire residues 👉 Restoration and renovation of metal, stone, or wood 👉 Cleaning of electrical equipment (without moisture) 📞 Quotation, demo, or questions? Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, switch cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Bjdpfx Aexzukksc Ajwr Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features Bwedpfxjra Dddo Ac Asr large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm - Total and individual cylinder control Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, Bedpfx Acsygwp Uj Ajwr - Pressing width 1800 mm - Pressing height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg Transport available at extra cost!

Condition: good (used), Kistler 9041A Piezoelectric Force Sensor, Force Ring Fz 90 kN Item condition: Used Bwsdpfx Ask Uul Eoc Ajr R12A5K2-5-PD (BOR) More sensors - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Electrical pressure force tranducer 722DS-300kN with load button, compression plate and 10cm fixed cable with connector Measuring range: 0...300kN Max. dynamic load: up to 225kN Sensitivity: 2mV / V Total error: ᐸ± 0.15% F.S. Dimensions according to data sheet 722DS-300kN_1MN Bwsdsfm Elpopfx Ac Ajr Electrical pressure force tranducer 731S-3,6MN with current output 4-20mA and 1,5m cable with connector Year: 2019 Measuring range: 0...3,6MN Sensitivity: 1,8mV/V Total Error: ᐸ±1% v.E. Abmessungen gemäß Zeichnung 731S-3,6MN

Condition: good (used), Year of construction: 1993, machine/vehicle number: 399/093, Offer 24464 Technical data: - with ECKOLD pressure joining pliers, type MZ - Working pressure infinitely variable max. up to 500 bar Bwjdpfsuzwc Djx Ac Aer - Joining gun pressure force 25 Kn - Single cycle or continuous cycle - Infinitely variable number of cycles - Hose package power unit - tongs approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Bedpfxeubyrxs Ac Ajwr Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.