Used Force for sale (5,927)

Condition: good (used), Year of construction: 1993, machine/vehicle number: 399/093, Offer 24464 Nodpfxouzwc Ds Ad Escn Technical data: - with ECKOLD pressure joining pliers, type MZ - Working pressure infinitely variable max. up to 500 bar - Joining gun pressure force 25 Kn - Single cycle or continuous cycle - Infinitely variable number of cycles - Hose package power unit - tongs approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Ncjdpfx Adjxzulno Ejn Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Ncedpfjxzukkex Ad Esn Max. number of shelves: 16 External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Technical information Nedpotzixpofx Ad Ejcn Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Travels - X axis (bed): 16,000 mm - Y-axis (vertical): 2,100 mm o Option Y = 3.100 mm - Z-axis (headstock): 1,200 (1,500) mm Control - CNC control: Siemens Sinumerik 840 C o Option control modification Heidenhain iTNC 530 o Option control modification Heidenhain TNC 640 o Option control modification Siemens Sinumerik 840 SL Feed rate - X-, Y- and Z- axis stepless from: 2 - 12.000 mm/min Universal milling head in orthogonal design - swivel range milling head: 340 x 1 degree - swivel range milling head: 180 x 1 degree - tool holder: SK 50 DIN 69871 - Speed: 2.800 rpm Clamping plate - T-slots: 28 H7 - T-slot distance: 250 mm, - clamping area: 18.000 mm x 1.500 mm Ncsdjnvd Tnjpfx Ad Eon Chip conveyor (2 pieces) - Ejection height above floor: 1,250 mm CNC insert rotary tables (4 pieces) - clamping surface diameter 1.250 mm Coolant system - Paper belt filter system o tank capacity: 30.000 l General overhaul 2016 • 1996 - Year of manufacture • 2016 General overhaul at MBM About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization _____ _____ used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metal working - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - cnc milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used metal milling machine used - used cnc milling - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: excellent (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 3,200 rpm, rotational speed (max.): 3,200 rpm, pivoting range: 360 °, year of last overhaul: 2022, coolant supply: 16 bar, ejection height: 1,250 mm, tank capacity: 800 l, Technical Specifications Travel Paths • X-axis (bed): 8,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (headstock horizontal): 1,600 mm Control System • CNC control: Heidenhain iTNC 530 Nodpewfdaljfx Ad Escn Feed Rate • Y- and Z-axis continuously adjustable from: 2 – 24,000 mm/min • X-axis continuously adjustable from: 2 – 20,000 mm/min Universal milling head with orthogonal design • Milling head swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm Chip Conveyor • Ejection height above floor: 1,250 mm • Feed length: 8,000 mm mm • Feed width: 350 mm Coolant system • Paper belt filter system o Tank capacity: 800 l o Pump capacity on the machine: 16 bar o Approx. 32 l/min Year of manufacture: 2005 • 2016: General overhaul of the headstock unit • 2022: General overhaul of the milling head About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large-part machining - large-part machining - CNC large-part machining - milling - SHW - UF6 - UF 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm - Cooling bridge after the oven - Infeed belt: 200 cm - Outfeed belt: 150 cm Ncedpex Nwinofx Ad Een The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 12,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,800 mm, nominal power (apparent): 63 kVA, controller manufacturer: Heidenhain, controller model: TCN 530, table width: 4,000 mm, table length: 4,000 mm, table load: 100,000 kg, Equipment: chip conveyor, X/ Axis 12,200 mm, Y/ Axis 4,200 mm Z/ Axis 1,800 mm, A/ Axis 180° C/ Axis 360°, W/ Axis 3,600 mm, B/ Axis 360°/001° T: 100 tons 4,000 mm x 4,000 mm / Skoda "Digital can be added" Nodpfxjymklvo Ad Escn Engine Power: 63 kW Speed Range: 22-5,000 rpm CNC Control Unit: Heidenhain I TCN 530

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Ncedpfx Aoxh Spked Ejn

Condition: new, Year of construction: 2024, Komatsu PC300 Reinforced General Purpose Bucket Njdpsvkpkhefx Ad Eocn Edge Length: 1550mm Capacity: 1.85m3

Condition: excellent (used), Zwick/Roell Ncodoymmg Nopfx Ad Ejn Model: 500N zwicki Zwick/Roell Material Testing Machine 500N Year of manufacture: 2016 | Xforce P / testXpert II For sale is a high-quality material testing machine from Zwick/Roell, model 500N. This system is ideally suited for tensile, compression, and material tests in the lower force range, and is typically used in laboratories, quality assurance, research & development, as well as in the plastics and packaging industries. The machine is equipped with an Xforce P load cell (20 N) and is operated via the proven testXpert II software (version 3.71). The software enables professional data analysis, including graphical representation and test reports. Applications: - Tensile tests on plastics, films, textiles - Compression tests - Tear and peel tests - Quality control and material development Technical specifications: - Maximum force: 500 N (0.5 kN) - Load cell: Xforce P, 20 N - Year of manufacture: 2016 - Power supply: 100–240 V, 50/60 Hz - Made in Germany - Incl. PC, monitor, keyboard - Stable laboratory table with drawer unit Weight: - Testing machine (without table & PC): approx. 70 – 90 kg - With laboratory table: additional approx. 40 – 60 kg - Complete system with PC & monitor: total approx. 120 – 150 kg Condition: used Scope of delivery: (see pictures) (Subject to change and errors in the technical data, details are provided without guarantee!) If you have further questions, we are happy to answer them by phone.

Condition: good (used), Big bag traverse, lifting sling, adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, cross traverse, H-traverse Njdox Ngp Ropfx Ad Eecn -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm -Empty weight: 315 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool Njdpsyb R Nwofx Ad Escn -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm Njdoyb R Ndopfx Ad Eecn -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg Nedpfx Adeyb R Akj Escn

Condition: good (used), Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg Ncodpeyay Elefx Ad Eon

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg Njdpoyanqvjfx Ad Escn

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Nsdpfx Adeymb Uno Ejcn Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Condition: new, Year of construction: 2025, – Capacity 36 mm – Automatic and manual mode – 3 programmable bending movements – Foot pedal operation Ncedpjydhl Iofx Ad Eon – Hardened bending tools – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2008, functionality: fully functional, total width: 7,000 mm, total length: 950 mm, total height: 1,850 mm, overall weight: 970 kg, 1 Hambi mesh cutting machine TV 60V, working width 6.00 m, year of manufacture 2008, max. 12 mm single rod or 8 mm double rod, cutting time forward/backward approx. 25/20 sec. Connected load 3 kW. Ncedpfx Adevxtc De Esn

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption Nsdjxabntopfx Ad Eocn - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: electric, Equipment: electrical contact length stop, emergency stop, foot remote control, Rebar bending machine Peddinghaus Spezial 55. Completely overhauled machine with tooling. Ncjdpsydfwusfx Ad Esn

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517334H00059, Year of construction: 2017, operating hours: 14,429 h, load capacity: 5,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,970 mm, power: 55 kW (74.78 HP), gearing type: hydrostat, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 60 mm, overall weight: 7,858 kg, empty load weight: 7,858 kg, total height: 2,970 mm, color: silver, Equipment: CE marking, cabin, lighting, sideshift, trailer coupling, Used forklift in operational condition Lifting capacity: 5,000kg Lift height: 4,300mm Power: 55kW Overall length: xx mm Width: xx mm Height: 2,970mm Own weight: 7,858kg Njdpfx Adewtyubs Eocn Fork length: 2,400mm Fork width: 150mm Fork thickness: 60mm Minimum fork spacing: 570mm (measured externally with forks closed) Maximum fork spacing: 2,020mm (measured externally with forks opened) Mast type: Triplex Side shifter: yes Cabin: yes Road lighting: yes Year of manufacture: 2017 Operating hours: 14,429h Condition: used, ready for operation The forklift can be controlled with great precision and sensitivity. Immediately available from stock! Includes: cabin, lighting, hydraulic side shifter, hydraulically adjustable forks, heating and ventilation for the cabin, CE certificate The forklift can also be rented. Delivery and pick-up within Germany possible with our own truck. Please submit your inquiry or simply call us. We are a family-owned company from Sauerland, official Mima importer, and your contact for service and maintenance of forklifts.

Condition: reconditioned (used), functionality: fully functional, URBAN POWER SCREWDRIVER with automatic SCREW FEEDER Technical data: Air connection: 7 bar Length: 1,400 mm Ncedox U An Topfx Ad Eon Width: 700 mm Height: 1,800 mm Weight: 100 kg Machine overhauled

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine 8/10/12/14 mm Nedpfxsw Trpcs Ad Eecn