Used Force Cart for sale (7,119)

Condition: used, Year of construction: 2018, operating hours: 278 h, functionality: fully functional, type of input current: AC, total width: 1,015 mm, total length: 2,250 mm, total height: 1,210 mm, overall weight: 935 kg, input voltage: 400 V, We offer this used DILO SF6 service cart L170R01+Storage Tank, type Version L170R1BBB0B0 (B176R), year of manufacture 2018. Technical description (seller Lund University/Accelerator Laboratory Equipment) SF₆ liquefier and a separate 1000l storage tank for liquid SF₆. The equipment is mounted on wheels and is intended for handling SF₆ in gaseous and liquid form. The stated operating time for the liquefying compressor itself is 278 hours, referring to the time during which the machine has actively been liquefying SF₆. The pumps used for vacuum pumping/recovery of SF₆ have a higher total usage time, but the exact value is not known. Total cycle time may vary depending on tank size and process conditions. For a large SF₆ tank, a complete cycle may take approximately 12–24 hours, while a smaller tank may be handled within a couple of hours. This description is based on information supplied by the seller. The storage tank is specified for a maximum filling of 1,000 litres, corresponding to approximately 980 kg, and is included, possibly together with 224 kg of SF₆ in gaseous and liquid form:INCLUDED. Iodpfsz E H Dhsx Akpotn Item and key data Equipment SF₆-liquefier and storage tank for liquid SF₆; all equipment on wheels. Producer DILO Armaturen und Anlagen GmbH, Germany Version L170R1BBB0B0 (B176R) MAT 1037463 Year 2018 Reference price EUR 88,019.19 (2017 new price, as stated in the supplied information). RESERVE PRICE: 45000 EUR. Lower bids will not be accepted. (Plant is very little used at University) The item will be sold to the highest bidder, provided that the reserve price has been reached and all other sales conditions are fulfilled. The buyer is responsible for and pays for all transport from Lund University’s handover location. Costs for loading, packing, transport, insurance and other related measures are borne by the buyer unless otherwise expressly stated. Bidders are advised to assess the condition, functionality and suitability of the equipment themselves before submitting a bid. The equipment is offered in its existing condition based on the information available. At the buyer’s request, Lund University may assist with a test run/demonstration at the buyer’s site. The buyer shall cover all costs associated with the university’s participation, including travel and hotel costs. The sale may also includes 224 kg of liquid and gaseous SF₆. The buyer is responsible for ensuring that handling, transport, receipt, storage and use comply with all applicable requirements and regulations, certificates and so on, in force.

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Itsdpfx Akszmyfdspon Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Itodpfoyvutwjx Akpjn Model F-100-5 Never installed Qty 2 available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Itedpfez Irbqox Akpon Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing Itedoybtnvspfx Akpen - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading Itedpfx Aszlcyuskpsn - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation Ijdpfx Ajyb Tw Rokpotn The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: excellent (used), Year of construction: 2018, Soco T55 Random Carton Case / Carton Sealer / Box Taper With top and bottom tape heads With outfeed gravity roller conveyor 400 V, 3 Ph, 10 A Iodehlp E Hspfx Akpotn Plastic rollers, roller width: 600 mm Height adjustable legs Dimensions: 980 mm x 800 mm Conveyor dimensions 500mm long

Condition: new, Year of construction: 2026, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts Itedegq Nx Uspfx Akpjn • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Itjdpfez Izcwjx Akpsn Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces Itjdpfx Akjzi Ex Ujpen X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Itjdpozi Hchsfx Akpon Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Itedez Rvftopfx Akpon 5391 LR Nuland

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Itedpfx Akjz Rvfyspen Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2004, condition: good (used), Golf car CLUBCAR PRECEDENT, 2-seater golf cart, 2004, with charger, blue. A video can be sent via WhatsApp. We have a continuous supply; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). Itedozz Sbgepfx Akpon You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs Itedpfsz Rvywox Akpjn ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Iodpfx Ajz S Hwvskpotn Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.

Condition: used, Year of construction: 2024, Fluke DSX 8000 in good condition. Itsdpfxjz I Sxpj Akpjn

Condition: repair required (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - For parts or repair - some spares with the machine and basic wiring details. READY TO SHIP WORLDWIDE Itodpfx Akexyyz Eepon Export documentation and shipping available

Condition: like new (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: E-008281, There is 1 transport trolley for sale. Iedpfezqu S Tsx Akpstn Price per unit. Load capacity: 500 kg.

Condition: used, Thermo Scientific Itjdpoziy D Eefx Akpjn   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2014, operating hours: 4,215 h, functionality: fully functional, machine/vehicle number: W09505260E0K51856, power: 90 kW (122.37 HP), first registration: 06/2014, overall weight: 6,000 kg, fuel type: diesel, color: traffic orange, axle configuration: 2 axles, operation weight: 3,500 kg, maximum load weight: 2,500 kg, empty load weight: 3,500 kg, tire size: 315/55R16MPT120K, next inspection (TÜV): 06/2026, fuel: diesel, wheelbase: 2,715 mm, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, suspension: hydraulics, loading space width: 1,700 mm, loading space length: 2,375 mm, loading space height: 90 mm, Equipment: additional headlights, all wheel drive, car registration, fog lights, hydraulics, immobilizer system, low noise, parking heater, trailer coupling, Motor cart - Kiefer-Bokimobil HY 1252 B, year of manufacture 2014. Comes with both German and Austrian papers. Price: €37,000 + 20% VAT. Immediately available. Isdpfxjxu Nn Re Akpstn

Condition: excellent (used), Soco System Carton / Case Sealer With top and bottom tape heads Model: T-100 380 V, 3 Ph Itedpfxehlp E Aj Akpsn Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: Elite P27965, This Kliklok Certiwrap Elite was bought to wrap snack pots at high speed. It is in nearly new condition as it has not been used a great deal. Iedoz E N Hrjpfx Akpstn

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, For sale is a fully automatic carton erector, Knecht AS-500, manufactured in 2013, with two carton magazines and a hot-melt bottom sealing system. The system is sold complete, including the control unit. The system was used in a packaging line for car rims. It removes the carton blanks from the magazines using vacuum suction cups, erects them, and seals the bottom with four hot-melt beads per inner flap. If one magazine is empty, the system automatically switches to the second magazine. Equipment and technical data according to the order documentation: - Two pallet magazines with motorized lifting mechanisms and erecting frames - Loading of the magazines with pallets using a hand pallet truck - Processing of cartons according to FEFCO 0201 - Hot-melt system from UES with a four-module application head - Length and position of the glue beads adjustable via the control panel - Carton transport with servo motors - Vacuum pump from Schmalz - Control system: ELAU C-400 - Operation: Touch panel MP 277 - Performance: 8 cartons per minute - Carton length: 400–650 mm - Carton width: 400–650 mm - Carton height: 150–500 mm - Working height: 750–800 mm - Electrical connection: 400 V, 50 Hz - Electrical power consumption: 12 kW - Compressed air: 6 bar; consumption: 2.5 liters per carton Isdpez Suvysfx Akpotn - Format changeover: partially automatic, partially manual - Changeover time: approx. 2 minutes, excluding emptying and refilling of the magazines The used system has been regularly maintained and is in very good condition. It is being sold due to a business closure and was in operation until it was dismantled. In its dismantled state, a functional test is no longer possible. An inspection at the location in 36381 Schlüchtern is possible by arrangement. The system can be loaded onto a truck on site. A video of the packaging line and detailed system documentation are available upon request. A Knecht VS-500 carton closer is offered separately.