Used Force for sale (5,926)

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Drive system: Conventional - Press force [ton]: 63 - Throat depth [mm]: 140 - Motor power: 7.0kW - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) - Transport weight [kg]: 5600kg Ncjdpfx Adsw Hzvmo Een - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, Equipment: safety light barrier, CNC ESA, 3 axes Y1 Y2 X and manual R, manual table crowning, table for crushed bend, DSP LASER, year 2020 Nodpfxoyanl He Ad Eecn

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Nsdpfx Aoiit Erod Ejcn Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: used, Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h total power requirement 2x 4.0 kW voltage 400 V weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment Njdpfx Adsxabz Tj Eecn * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Njdoyfphaopfx Ad Ejcn Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2012, Amada EM3610NTK electric punch, 45 Station Turret with 4 Auto indexing units 2012 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1525 x 2500mm Ncjdpfjyh Dt Tox Ad Ejn 1525 x 5000mm 4.5mm mild steel 160Kg max sheet weight mm 58 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) 128 m/min WEIGHT 24.5 KGS

Condition: used, Year of construction: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm control Siemens Sinumerik 840 D quill stroke 800 mm max. workpiece weight 20000 kg tool taper ISO 50 BIG PLUS DIN 69871 max. torque at the spindle 2346 Nm spindle diameter 160 mm total power requirement 65 kW weight of the machine ca. 50000 t dimensions of the machine ca. 12,8 x 11,8 x 5,7 m Work table - Clamping surface 2500 x 2000 mm - Table height above floor 800 mm Feed speed - x-axis 0.5 to 10000 mm/min - y-axis 0.5 to 10000 mm/min - Z-axis 0.5 to 10,000 mm/min - Rapid traverse (X/Y/Z) 25 / 25 / 25 m/min - Max. feed force (X/Y/Z) 28,000 / 27,000 / 28,000 N Spindle speeds in 1/min - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3000 rpm Tool magazine: - 306 slots divided as follows: Number of slots max. length 700 mm: 54 Number of slots max. length 450 mm: 54 Number of slots max. length 300 mm: 63 Number of slots max. length 200 mm: 135 - Tool weight max. 35 kg - Tool diameter with free auxiliary slots max. 325 mm - Tool diameter without free secondary spaces max. 105 mm Accessories - Approx. 30 nos. SK 50 tool holders - 1 measuring probe - Coolant system/paper belt filter & chip conveyor - Cooler - Oil mist extraction Ncodow Sfkkopfx Ad Eon - Fixators - Documentation

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Ncjdoukitxjpfx Ad Een Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Njdpfx Adjvylile Eocn Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 Ncedpfsymn Egox Ad Een The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Nedpfx Aoymnv Eod Ejcn Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation Ncedoymm Erspfx Ad Ejn - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, Amada GS11 840 Guillotine Shear with Amada Control, 4000mm Max Cut Length, 8mm Mild Steel Max Cut, Max Force 271kn, Max Stroke 190mm, Auto Back Stop. S/No. C100 219 (2013). Country of Origin: France Ncedpfxsyid Iae Ad Ejn Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Bystronic Xpert 150 Brake Press with Bystronic CNC Control, 4100mm Bed, Max Force 1500kw, Max Stroke 215mm, Auto Back Stop 3 Axis, Bystronic Fast Bend Laser System. S/No. 11530057 (2011) Machine Weight 11,800kg. Country of Origin: Germany Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Nedpfxoyid Efs Ad Escn

Condition: used, Amada HFE M2 5020 Brake Press with Amada CNC Control & Hand Remote, 2100mm Bed, Amada Quick Change Tooling System, Max Force 500kw, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 5020 D100529 (2012) Machine Weight 4,700kg. Country of Origin: France Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Njdpfxsyid A Rs Ad Eocn

Condition: used, Amada HFE M2 1704 Brake Press, 4100mm Bed with Amada CNC Control & Hand Remote, Amada Quick Change Tooling System, Max Force 1700kn, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 1704 K100879 (2015), Machine Weight 13,800kg. Country of Origin: France Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Nodpfx Ajyidz Tjd Ejcn

Condition: used, Bystronic Beyeler Xpert 250 Brake Press with Bystonic CNC Control, 5100mm Bed, Hydraulic Tool Clamping, Max Force 2500kw, Max Stroke 265mm, Auto Back Stroke 265mm, Auto Backstop 3 Axis, Fiessler Electronik Sensor System. S/No. 8710001 (2008), Machine Weight 26,000kg. Country of Origin: Germany Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ncjdpjyidx Eefx Ad Een

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Njdpfx Adjwnhd Hs Escn Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ncodpfx Adjw Ryxms Ejn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2012, Electric winch, cable winch, lifting winch, construction winch -Tensile force 1 layer: 365 kg -Tensile force 2nd layer: 332.5 kg Ncedsdbyhnepfx Ad Eon -Tensile force 3rd layer: 300 kg -Rope speed 1 layer: 10 m/min -Rope speed 2nd layer: 11.25 m/min -Rope speed 3rd layer: 12.5 m/min -Wire rope: 10 mm -Max. rope length: 43 m -Power of geared motor: 1.4 kW at 1395 rpm -Features: electrically driven, with limit switch, without control unit -Dimensions: 900/650/H440 mm -Weight: 137 kg

Condition: used, Year of construction: 1976, total length: 2,200 mm, total width: 1,200 mm, total height: 2,060 mm, Weight: 2.000 kg - Year: 1976 - Documentation available: No - CE certificate present: No - Serial number: 6720 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2050 - Column gap [mm]: 1600 - Backgauge depth [mm]: 700 - Crowning system: None - Punch holder: Fixed - Tools included: Yes - Transport dimensions: 2200mm x 1200mm x 2060mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ncsdpfxjylvhge Ad Esn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nodpjyatkbofx Ad Eecn Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. Nodpfoyl T U Dsx Ad Ejcn (Subject to changes and errors in technical data and specifications!)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 16,381 h, Used AMADA press brake Nedpjykyuzefx Ad Ejcn Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: used, Year of construction: 2008, x-travel 2500 mm y-travel 2500 mm z-travel 1700 mm control Siemens Sinumerik 840 D Nodew N S E Njpfx Ad Eecn max. workpiece weight 6000 kg spindle diameter 130 mm quill stroke 700 mm tool taper ISO 50 DIN 69871 - AD max. torque at the spindle 1847 Nm total power requirement 65 kW weight of the machine ca. 45 t dimensions of the machine ca. 10,9 x 9,3 x 5,7 m Work table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mm Feed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpm Equipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -Technical documentation