Used Extruded for sale (397)

Condition: excellent (used), CEAST Gkedevx Sxdjpfx Afied Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1990, condition: good (used), This haul-off saw, manufactured by Battenfeld Extrusionstechnik GmbH, is stored in the machine store of Plastima Used Machinery. The machine was made in the year 1990. Gkedpfx Afotpnbusijd Brand: Battenfeld Extrusionstechnik GmbH Model: SAW MODELL SU630P Year of construction: 1990 Voltage: 380 V Power: 6,25 kW Pipe diameter max: 110 mm to 630 mm

Year of construction: 1998, operating hours: 4,500 h, condition: ready for operation (used), General Data Measurements width 5000 mm Measurements depth 20000 mm Measurements height 3400 mm Gsdpfx Afsv Tq Tceijkd Additional Equipment Non-contact thickness measurement for automatic TD profile measurement with double-sided corona treatment (max 12000W) Optical inspection system, including a marking system for detecting faults, incident and transmitted light system Includes components for cooling, screen changing, feed block, slot die, cutting, edge banding, drying, dosing, transferring, and antistatic control. This Battenfeld BA 60 film extruder was manufactured in 1998. A reliable choice for your film extrusion needs, it represents a solid addition to any production line. Contact us for more information. Application Types Extrusion

Condition: good (used), Year of construction: 2011, Metalbud Nowicki MH-75 SAS Multi-Needle Injector Gksdpjw Eb S Eofx Afiod Metalbud Nowicki supply a range of injectors with a SAS SYSTEM  Produces greater control of injection process.  SAS SYSTEM Meat Injectors are intended to implement the most complex processes of injection.The Metalbud Nowicki MH-75 SAS Multi Needle Injector is suitable for meat muscles and elements of red meat with bone or boneless, poultry and parts of white meat with bone or boneless. SAS SYSTEM advantages  High rate of repeatability throughout the operational process. Low injection rates up to 10%, as well as high injection rates up to 120%, small deviation of injection level from 0.5 to 2% high production rates in kg/h Maximum speed of injection is up to 60 cycles per minute. Injection of raw meats with different thickness without extruding brine. Allows pre-programming of injection moment, i.e. determining the layer of raw meats which will be injected and the drive of transporter is synchronised with the drive of injection head which enables many combinations of injection patterns. Multi-step filtration system Easy disassembly of injection head. Manufacturer: Metalbud Nowicki Model:MH-75 SAS Year:2011 Number of needles:75 Number of heads:1 Belt Width:370 mm Max. speed of injection:60 cycles/minute Max. output:3.000 kg/h Volume of injection:5/100% Machine Dimensions LxWxH:2.650x1.900x2.100 mm Machine Weight:1.000 kg.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: F96172.1, power: 57 kW (77.50 HP), input voltage: 400 V, Equipment: documentation/manual, I am selling a Paul Muller ELK 60-28 D extruder. We produced PVC material on the extruder. The chamber and screw are in very good condition. The machine did not show any problems during production; production was consistently within a 0.2mm tolerance. The machine is currently disconnected and stored in an air-conditioned warehouse. Gsdpfxsxm Sbks Afijkd

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Hourly output 250-400 kg depending on the product Gsdpfx Ajv U Nnusfiskd

Condition: excellent (used), Desktop Metal 3D Printer Complete System Gksdpfxjk Hz Nqj Afiod Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control Gkedpfxewaxuaj Afisd • Output on PVC around 700 kg/hour

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Gjdpfxeurvzrs Afiskd Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Gkodpfx Afebqt Arsisd For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Gjdpownpbgefx Afijkd Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: good (used), Year of construction: 1994, 105 mm screw, l/d: 40 Made for PE granulation Year 1994 With active degassing unit Including BD-Plast screen changer Gkjdpfov S Hr Ejx Afiod Water ring granulation

Year of construction: 2017, condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Gkedpfx Asvcynuefiod

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Gkodpfxjvvldue Afiod Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Gjdovuzqzjpfx Afiekd Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. Gkodpjvcyk Nsfx Afijd The extruder was used for powder coatings

Condition: good (used), WEBER tube extrusion line including: Gkjdpfx Afevryhyeiod WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 1996, condition: used, WP ZSK 83 Extruder The Extruder is available in Mai 2014.Inculded are two electrical cabinets and one operator panel, a motor fan and a volumetric Accurate feeder. Two complete spare screw shafts are also for sale ( not included , one set screw shaft are in the machine. The Extruder is fixed on a steel frame ( gear box, barrels ). The main motor is fixed at a separate steel construction and conected with belts to the Lenze gear box. The Extruder is from 1979, the electrical cabinet is from 1996 with 56000h. Gksdpfxob Hmrne Afiod The Lenze gear box is from 2011 and also the duo gear box. A few barrels are also from 2011. The cooling belt is not included in the price.

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Gksdsvri Ddepfx Afisd Options • Including haul-off • Including cooling bath

Year of construction: 2005, condition: good (used), Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Gsdpfxeui Ixio Afijkd Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Gkjdpfx Afjvcqccsied

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Gkodpfx Afsvl Hzgeied Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine comes from 2008 and is in great condition. Brand: Kuhne GmbH Model: K 60E - 33D Gedou Etygspfx Afijkd Type Screw: single screw Year of construction: 2008 Screw diameter Ø: 600mm L/D ratio: 33 cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. Gsdpfx Ajq Tr T Rofiskd – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm Gsdpfjq Tr Tbox Afijkd - Ratio: 20 L/D