Used Electrostatic Precipitator for sale (127)

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Podo Aba Rgjpfx Akisgu Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: Pedsh Aku Topfx Akiegu • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions • High operating reliability

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, manufactured in 2018, hot water system, output 550 kW, underfeed firing with a moving grate, including pneumatic cleaning, including infeed auger with backfire protection, including multi-cyclone separator mounted directly on the heat exchanger, including ash removal with an auger, including control system, the system is fully functional! Including electrostatic precipitator, brand Meister, matched to the system, including ash removal for the electrostatic precipitator, including control system for the electrostatic precipitator, including flue gas fan. The system is being sold due to connection to a district heating network. Dismantling can be included as part of the offer. Pjdpfx Asvgf Ibskijgu

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Pgjdpfxezdupls Akieu 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Pjdpfx Aoyg H Erokisgu 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Pedpfx Akeyg H Dhoijgu 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); Podpfxewcp I Aj Akiogu - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic dust extraction system Intake on the right The intake nozzle can be screwed on as needed; currently, there is none, as it was previously mounted directly on the housing wall. Podpfszqttcjx Akisgu In very good, fully functional condition, and naturally completely cleaned. Available for immediate delivery.

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter Pjdpfjlb Iv Esx Akisgu -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is an Oerlikon Nonwoven ecuTEC+ electrostatic charging machine, designed for the electrostatic charging of filter media. The machine is intended for integration into a production line and processes material webs with a width of up to 1,700 mm. The material is guided through the machine by a system of deflection rollers and electrostatically charged using charging bars. The system is equipped with an HMI control panel and can operate in constant-current or constant-voltage mode. The machine has seen very little use and is being offered due to changes in the production setup. Manufacturer: Oerlikon Nonwoven / Oerlikon Neumag Model: ecuTEC+ Pgedpfx Akjzumiroiju Year: 2020 Application: electrostatic charging of filter media Maximum material width: 1,700 mm HMI operator panel Adjustable charging system Constant-current / constant-voltage operating modes Designed for integration into an industrial production line CE documentation available According to the manufacturer's documentation, the material is guided through the machine via seven deflection rollers and electrostatic charging takes place at four charging positions. The system includes the machine frame with safety guarding, deflection roller/charging section, electrical cabinets with control electronics and high-voltage generators, and touchscreen control panel. Condition: Used, very low operating use. The machine is currently dismantled/disconnected from the production line. Detailed technical documentation is available. A comprehensive PDF specification/manual can be provided to interested buyers upon request. Inspection can be arranged by appointment. Further information, photos and documentation are available on request.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Podpeflk Awofx Akisgu Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Pgjdpfx Ajfz U Nbekiou 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), We offer a ready for use hamos EKS 1031 electrostatic separator for plastics. This machine is designed for efficient separation of mixed plastic materials using electrostatic technology. Ideal for recycling and industrial processing applications. Condition: ready for use Voltage: 400 V Frequency: 50 Hz Type: EKS 1031-0 The machine is in good working condition. Inspection possible. Pgjdpfx Akoyv Hzaeisu Location: Lithuania For more information, please contact us.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Main Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product Type: Main precipitation vessel / process vessel Nominal Volume: 1,500 liters Total Volume: 1,785 liters Empty Weight: approx. 866 kg Product-contact Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: Stainless steel Operating Pressure (Vessel): –1 / +3 bar Test Pressure (Vessel): 5.4 bar Operating Pressure (Jacket): as per design Temperature Range: –10 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Individual inspection Approval by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel underwent a complete documented FAT at the BRINOX plant. Tests performed included: • Delta ferrite test of weld seams (conforming, no deviations) • Surface roughness check (Ra internal ≤ 0.8 µm, conforming) • Visual inspection of all product-contact surfaces • Pressure test as per specification • Documentation review • GMP deviation management (only non-critical points, fully resolved) • Measuring instruments with valid calibration certificates DESIGN • Double jacket for heating/cooling • Horizontal design • High-grade pharmaceutical finish • Fully constructed from 316L stainless steel in product-contact areas • Mirror-polished internal surface • GMP-compliant, documented weld seams • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Prepared for instrumentation (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange base • Lifting lugs and transportation version • Project-specific build for CSL Behring (Project SPHINX) CONDITION • Never in productive use • Direct from project surplus • Absolutely as-new interior • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Welding documentation (WPS/WPQR) • Delta ferrite test protocols • Roughness measurement protocols • Calibration certificates for measuring instruments • GMP deviation protocols • Fully signed FAT protocols • Operating and maintenance manuals All documentation is complete and well-structured. Pgedpfx Asykn Iiskiou • Pharmaceutical active substance processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processes • Biotechnology • GMP production facilities • Ultra-pure media SPECIAL REMARKS This is a high-quality BRINOX process vessel in true pharmaceutical project quality, built for CSL Behring, with full PED Module G individual inspection, FAT 2020 documentation, and comprehensive GMP documentation. Not a standard tank, but certified project quality for sterile applications. Immediately available.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: Podsyrg Ahjpfx Akiogu • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: good (used), Year of construction: 2003, operating hours: 73,297 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 3,000 kg, overall weight: 40,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 64,901 h, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, Tool holder SK 50 Pallet changer Belt filter system for coolant with pumps IFE electrostatic filter for oil mist extraction Pgodpfo Af U Thex Akisu Chip conveyor Electronic handwheel Platform made of grating with stairs Measuring probe The machine is sold with a completely overhauled SK50 spindle. Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and proper assembly – all from a single source. Billing is based on individual terms and conditions and payment periods. Contact us for your personal offer.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. The machine is available upon agreement. Further information is available upon request. Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. Pjdpfjzzxbtsx Akisgu The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) Podpfxjfz U Tis Akiegu For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Pgodovrfv Aepfx Akiju Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components Pjdpfx Akoy Ug Ecjijgu 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: used, Year of construction: 2011, operating hours: 2,200 h, functionality: fully functional, power: 7.5 kW (10.20 HP), year of last overhaul: 2026, We offer this used Schneeberger Norma CFG 7.5 kW tool grinding machine, manufactured in 2011, for sale. OPERATING HOURS: 2200! Automatic programmable central lubrication system Pneumatic hoses completely renewed 4/2026 Standard version PLUS: - Hydraulic quick tool clamping system - Grinding wheel spindle HSK 50 - Quinto-Basic-SW woodworking tools - Coolant filter unit 330l; 6.3 bar - CO² fire protection system Special accessories: - Manufactured in 2013 - Workpiece loader MIL incl. quick-change tool holder for profile cutters and shank tools - 1 piece of pallet for profile cutters - profile thickness: 2mm; plate width up to 150mm Machine Specifications – NORMA CFG (Schneeberger Invoice No. 88088, dated 21.12.2011) Pgedpfx Akozqu Tdoisu MAIN MACHINE M-55039-0031 – CNC Tool Grinding Machine "NORMA CFG" Power: 7.5 kW Machine No.: 21'692 Voltage: 400V / 3-phase / 50Hz EQUIPMENT & OPTIONS M-51019-0021 – Automatic programmable central lubrication M-50019-0022 – Precision 3D touch probe PSM 118 M-82090-0003 – Network connection M-56009-1993 – Remote maintenance software, 2 years free M-50009-0191 – Dressing roller on mounting arbor M-530890098B – Hydraulic quick tool clamping, ISO 50 M-10030-0115 – Expansion collet chuck ISO 50, D=20 M-10030-0116 – Expansion collet chuck ISO 50, D=32 M-56039-0044B – Plate mount, hydraulic, horizontal M-50020-0211B – Intermediate layer 40 M-50020-0003B – Intermediate layer, standard M-56009-0643 (x6) – Grinding wheel mount HSK50, 20/70x85 M-45000-0000 – Quinto base software M-45000-0010 – Quinto standard tools M-45001-0210 – Quinto software eGrind viewer M-45000-7030 – Quinto software dxQ, woodworking inserts M-45001-0010 – Quinto easyPROFILE M-45000-1010 – Quinto software, woodworking tools M-50009-0190A – Flow monitor M-50019-0049 (x6) – Complete plate with coolant pipes M-55039-0059 – Coolant filter unit, 330 L, 6.3 bar M-50009-0036 – CO2 fire suppression system M-55039-0086 – Electrostatic extraction/suction unit M-600000-051 – Training in Roggwil/Weissach, 3 days M-600000-052 – Installation and follow-up training, 3 days in Gütersloh M-20000-0032 – Truck packaging M-20000-0050 – Transport incl. transport insurance (not unloaded), DAP DE-Gütersloh If you have any questions or need further information, please feel free to send us a message.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete clamping system, with two modified clamps for Ø14 and Ø16 • Automated pallets with diameters of Ø3, Ø4, Ø6, Ø10, Ø12 • Various grinding wheels for roughing and finishing, some new, for both carbide and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) Pjdpfxozcvako Akisgu • New workpiece rotation belt (replacement due in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter changes and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since the maintenance -separate sale can be considered- • Machine price: €25,000 - Filtration system price: €10,000

Condition: excellent (used), Year of construction: 2014, 2014 Schneeberger Sirius HPM 6-Axis Tool Grinding Machine With Fanuc Series 31I-Model A5 CNC Control Gear Tooth Production Steptec GFQ 170E Swivel Spindle Workhead. Travel: 'X' Axis = 420mm, 'Y' Axis = 310mm, 'Z' Axis = 340mm. 'A' Axis (Rotation) = 2,400°/S. ISO40, Centre Height 150mm. Swivel Axis 'B' = 90°, Swivel Axis 'C' = 180°. (1) Hitema Stand Alone Air Cooled Liquid Chiller Type ENR.018/CX.SST.WP.HW.RV.DD.GALV (340kg, 2020). (1) Hyfra Pedia Sigma 13-S Stand Alone Water Cooling Chiller (200kg, 2014). VAS 7041, 400 Litre Stand Alone Filtration System (800mm x 1,300mm x 600mm, 400kg). Sirius S/No. 21828. Quantity of Assorted Arbors, Collets, Grinding Attachments & Associated Tooling to Suit. Probe, Machine Light & Signal Tower. New Battery Fitted 2025. Kraft Bauer Fire Extinguishing System. Elbaron Ronia 100 DV Electrostatic Air Cleaner/Mist Collector. Cosmotec EVE10082207000 7035 Air Conditioner (2013). Power Supply 415 Volt, 3 Phase. Full Catalogues & Manuals Available. Weight of Machine Approx 8,100kg. Dimensions of Machine Approx 1,700mm x 2,270mm x 2,215mm. Note: Client will arrange for the machine to be disconnected and drain the oil (if required) and move to the Exit for collection. During viewing, Client is willing to demonstrate the machine capabilities. Pgsdpjz E R T Hefx Akiou

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg Psdpez T Nc Djfx Akiogu + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: excellent (used), PRO XP85 MANUAL ELECTROSTATIC SPRAY GUN GRACO REF. L85T10 - Brand: GRACO - Reference: L85T10 -PRO XP85, Standard, BOQ. 1.5MM., 85KV. -Industry in general, metal, wood -Does not include hose, avaliable under demand - Second-hand product that has passed a very rigorous tuning Pgsdoivt Riopfx Akieu - 1 year warranty. It is in like-new condition - VAT not included