Used Electrode Furnace for sale (1,187)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 Dsdszu Nvzjpfx Agnewb - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Dwjdpfx Ajxwn R Negnsb Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: good (used), REF: MM6180 Dwedpfsw Rn Euox Agneb Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: excellent (used), Year of construction: 1999, For sale: a high-temperature Nabertherm HT-16/17 laboratory furnace, designed for operation at temperatures up to 1750°C. The furnace was used very little and infrequently, so despite its age, it is in very good technical and visual condition. The furnace chamber is clean and well-maintained, and the heating elements and insulation are in very good condition. The unit is fully functional and heats up correctly. This is a robust, professional high-temperature furnace from the renowned German manufacturer, Nabertherm. Technical data: • Manufacturer: Nabertherm • Model: HT-16/17 • Controller: C42 • Maximum temperature: 1750°C Djdezzd Tbopfx Agnjwb • Chamber dimensions: approx. 200 × 300 × 260 mm (W × D × H) • Power: approx. 12 kW • Weight: approx. 270 kg • Condition: used, very good

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight Dwsdozx S Emepfx Agnob External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen Dodpfx Aszvfdqjgnowb

Condition: ready for operation (used), Nabertherm N 120 / 85 HA Muffle furnace, convection chamber furnace, hardening furnace, furnace Max. temperature: 850 °C 13 kW Space requirement: 1400mm x 1000mm x 1500mm (W x D x H) Internal dimensions: 480mm x 710mm x 480mm (W x D x H) Diagonal: 950mm You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Dwsdpfxszxn Azj Agneb For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Dwsdpozuabzsfx Agnjb Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 1,400 h, power: 113 kW (153.64 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, inner dimension length: 8,040 mm, inner dimension width: 1,020 mm, inner dimension height: 120 mm, total length: 8,890 mm, total width: 2,005 mm, total height: 2,065 mm, number of chambers: 1, number of shelf rows: 3, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. Dsdpfxjyvqt Ho Agnjwb This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light Dwodpfx Aszbr U Uegnjb -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2008, machine/vehicle number: 3079241-0010, functionality: fully functional, power: 175 kW (237.93 HP), input voltage: 400 V, input current: 253 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 21,000 kg, number of chambers: 2, control type: PLC-controlled, Aichelin Dwjdpfx Aox Tup Hognob VKEs 3-60/65/110 Multi-chamber furnace Connected load: 175 kW Max. temperature: 1100°C Max. load: 650 kg Total weight: 21 t Furnace atmosphere: N2, methanol, NH3, air, natural gas, propane With loading table

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Djdpfx Agozfif Rsnewb Aluminum capacity: 60 kg, melting time: 30 min. Bronze capacity: 200 kg, melting time: 60 min.

Condition: used, Year of construction: 2009, Curing Furnace Model: Electric Djdjzry Ipjpfx Agnewb Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Documentation available: No - CE certificate present: No - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Dsdpfx Aezqclhognewb

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Dwjdpfx Agszf Upnsneb Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Supplier industry Special Features Very high batch capacity of up to 10 tons Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 04493, functionality: fully functional, temperature: 1,100 °C, inner dimension length: 2,000 mm, inner dimension width: 480 mm, inner dimension height: 300 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Djdpezyf Tasfx Agnewb Used in accordance with applicable guidelines and maintenance recommendations in a large German corporation. High-performance high-temperature furnace for industrial heat treatment and manufacturing processes. TECHNICAL DETAILS Maximum temperature: 1,100 °C Heating chamber (L × W × H): 2,000 × 480 × 300 mm MACHINE DETAILS Electrical connection: 380 V Fuse rating: 125 A Power: 35 kW Dimensions (L × W × H): 2,500 × 1,000 × 1,700 mm Connection: III EQUIPMENT Mounted on a chassis with rollers CE marking Note: EXW – Buyer is responsible for organizing disassembly and loading.

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Dwodpszh Uyrjfx Agnob Output for 5 mm glass: approx. 16-18 cycles/hour Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 3 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 300 °C, total length: 2,140 mm, total width: 1,640 mm, total height: 2,200 mm, overall weight: 1,600 kg, control type: NC control, actuation type: electric, fuel type: hybrid, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Rotating Gas-Fired Oven, 800x1000: Dimensions: 1640x2140x2200mm -Tray dimensions: 800x1000mm -Bread capacity (400gr loaves): 90 loaves on 15 levels -Baguette capacity: 144 baguettes on 18 levels -Burner power: 90 Kw -Electrical consumption: 3.5 Kw / 11A Dwodpjzrwckofx Agnjb -120 mm thick hinges -Electric and programmable valve -100 mm thick insulation -Stainless steel baking chamber -Door with 2-point locking -Halogen lighting -Fast and secure loading system (guide and automatic tray locking) -Double-glazed, low-emissivity, ventilated, and easy-to-clean glass

Condition: ready for operation (used), Nabertherm N60 / 45HA Muffle Furnace Max. temperature: 450°C Usable volume: 60 liters Internal dimensions: 350mm x 500mm x 350mm (W x D x H) Description taken from original listing. You are welcome to come and inspect the furnace. Dsdozqz Nfjpfx Agnowb We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Heraeus MR 260 Annealing Furnace Internal dimensions: 260mm x 500mm x 160mm (W x D x H) Space required: 1100mm x 700mm x 1560mm (L x W x H) Weight: 150 kg Rated temperature: 1000°C Dedpfezu Natex Agnewb You are welcome to visit us for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Dedpjwykz Sofx Agnjwb Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. Dwjdpfozq Ax Usx Agneb The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009703, functionality: fully functional, Completely overhauled, delivery time 3-4 weeks Chamber oven for solvent-containing materials, compliant with DIN 1539 - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm Dwjdpozy Ihgefx Agnsb - Max. temperature: 250°C - Controller: JUMO Imago 500 - Approved solvent quantity at max. temperature: 250 g / 46 g - Exhaust air flow rate: 6 m³/min - Additional equipment: 1 feedthrough, e.g. for thermocouples 3 heavy-duty grid shelves - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration - Current DGUV test report Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, tempering oven, paint drying oven, solvent oven.

Condition: used, Technical Specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical specifications according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application Areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Dwodpfx Aoznv Eiegnjb Research and development Chamber dimensions (internal): W 1000 H 1000 D 800

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Dwedpjztrbwjfx Agnsb