Used Eccentric for sale (917)

Condition: used, Year of construction: 1976, Press force 2,500 kN Throat depth 450 mm Adjustable stroke 20 - 140 mm Max. ram adjustment 100 mm Cpodpfx Aeyg Efdegzsw Stroke rate 20 to 60 per min Machine weight approx. 19,000 kg Press overhauled in 1996 Further data and photos upon request

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Cpedpfx Aoyg Ecpegzew Machine weight approx. 5,100 kg Further data and images available on request

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Further data and images available on request Codeyg Ebxopfx Agzepw

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Cedpfx Agjyath Tozopw Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Cedpfx Aeyiflmegzspw

Condition: new, pressure 10 t throat 160 mm stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min bore 25,0 mm - Werkzeug compressed air max. 6,0 bar Cpedpfoxaad Hex Agzow dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug Cedpfsxabrrex Agzopw compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar Cpsdsxabvkjpfx Agzjw dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Eccentric Press - Single Column Manufacturer: ZTS Kosice Model: LEK 160 Year of manufacture: 1991 Capacity: 1600 kN = 160 tons Throat depth (vertical distance from ram axis to the front face of the frame in the working area): 355 mm Shut height (distance between table and ram surfaces in bottom dead center): 455 mm Adjustable stroke: 25 - 160 mm Working stroke: 5.3 mm Ram adjustment: 100 mm Max. strokes per minute: 50 SPM Usable strokes per minute: 32 SPM Table clamping surface: 1000 x 740 mm Table plate size: 980 x 710 mm Ram size: 710 x 425 mm Table plate thickness: 100 mm Table opening: D 290 x H 8 mm Cedpfxoygh Ihs Agzepw Ram clamping opening: d 50 HB x 85 mm Motor power: 11 kW Voltage: 380 / 220 V Frequency: 50 Hz Working air pressure: 0.6 Pa Overall dimensions (L x W x H): 1380 x 2400 x 3350 mm Weight: 13,000 kg

Condition: ready for operation (used), Press force: 10000kN, ram stroke: 350mm, stroke rate: 28rpm, overtravel: 102mm, overtravel time: 0.2s, safety distance: 330mm. On-site inspection is possible. Codpfxowm Nnde Agzjpw

Year of construction: 1992, condition: ready for operation (used), An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement. Codpex Aum Isfx Agzspw

Year of construction: 1973, condition: ready for operation (used), Press force: 1250kN, ram stroke: 20mm-120mm, stroke rate: 50/min, overtravel: 54mm, overtravel time: 0.2s, safety distance: 320mm. On-site inspection is possible. Cpodpfx Agjwm Nnkozew

Condition: ready for operation (used), Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible. Cpjdpfx Aovr Edyegzew

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Manufacturer: KOSICE Model: LE 160 C Year of manufacture: 1990 Machine No.: 2291458 Condition: Good / operational Cedpfeyghx Tjx Agzopw Table clamping surface: 1000 x 720 mm Weight: approx. 10,800 kg Width (including control cabinet): 1,500 mm Throat depth: 355 mm Pressing force: 160 tons Stroke rate: 50 / min continuous operation Stroke rate: 30 / min single operation Motor power: 11 kW Ram adjustment: 0 – 100 mm Stroke adjustment: 20 – 120 mm Ram clamping surface: 750 x 380 mm Max. distance ram – table: 450 mm Pass-through hole in table: 480 x 300 mm Air clutch: 6 bar External dimensions: Depth: 2,360 mm Height: 2,850 mm Including: Press safety control Starkstrom Gummersbach Electric auxiliary brake Desch Additional table plate: 900 x 580 mm Two-hand control panel Foot switch Central lubrication Intermediate table Latest safety inspection (UVV): 2024

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Cpjdpswir U Eofx Agzow Ram plate thickness 100mm Table plate 1250 x 700mm Table plate thickness 180mm Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Year of construction: 1999, condition: good (used), Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering Csdpfsxy I Hpex Agzjpw -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm Codpfsi Agynsx Agzjpw -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: used, Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown Cpjdpfx Asd Nzg Rjgzew

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Cpsdpfox U Eiaox Agzew Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: v.c1854/GO/2009, Dimensions: W 1400 x D 1790 x H 2550 mm Weight: 5850 kg Compressed air: 5-6 bar Air connection: G 1/2" Air consumption: 0.009 m³/stroke Electric Motor Power: 3.5 / 7 kW Speeds: 725/1450 rpm Electrical Specifications Mains voltage: 380 V / 50 Hz Cedpfx Agjyml N Njzspw Control voltage: 24 V / 50 Hz Lighting: 24 V / 50 Hz Working Area Rated press force: 63 tons Stroke rate – continuous operation L/S: 65/130 strokes/min Usable single stroke rate L/S: 32/- strokes/min Max. sheet thickness (continuous operation): 2.5 – 3.5 mm, single stroke: 7/- mm Clearance from ram center to machine frame: 315 mm Ram Adjustable stroke: 10–105 mm Ram adjustment: 70 mm Clamping area (W x D): 450 x 275 mm Clamping shank: hole Ø / depth: 45/100 mm Table Clamping area: W 800 x D 630 mm Through-hole Ø: 250 mm Distance between T-slots: 400 mm Intermediate Plates Clamping area: W 800 x D 610 mm Thickness: 85 mm Through-hole Ø: 110 mm 4 diagonal slots, X-configuration, 60° T-slots, slot width: 22 mm

Condition: good (used), Year of construction: 1978, Pressing force 45 t Cpodpfjx Rvbxox Agzsw

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t Cpedeykb Ebspfx Agzjw

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm Cpodpfxoykb D Rs Agzow total power requirement 3 PS

Condition: used, Year of construction: 2004, pressure 25 t Cpedpfsykb D Dex Agzjw throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW weight of the machine ca. 2,8 t

Condition: used, Year of construction: 1996, pressure 45 t throat 230 mm Cpodsykb Dwjpfx Agzew stroke 0 - 160 mm no. of strokes 120 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,95 t