Eccentric Press - Single Column

AMBOLD PEEV 25.3

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Kedscgmf Rspfx Ag Ujll Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor Klodpsfg E Hpofx Ag Ujl are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm Kjdpfx Asf N Nlvog Uoll • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Ksdpskvnumsfx Ag Uell Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake Kledpfx Agofv H Dkj Uel system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm Kedjcxxx Hopfx Ag Ujll table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: excellent (used), functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale With tooling and J shape lower tool Klsdpfowbhipjx Ag Uol

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Kodpfeqqkx Nox Ag Ujll Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). Kedpfx Asi Emapjg Uell The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 Kljdpfoundg Uox Ag Usl ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg