Used Arburg 270 M for sale (310)

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Prjdpjxrf Nrjfx Akioc

Condition: ready for operation (used), Year of construction: 2024, operating hours: 766 h, clamping force: 400 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details. Psdpfxsz Eq S Ns Akierc - Max. Specific Injection Pressure: 2738 bar- Max. Swept Volume: 28 cm³- Mould Height: 160 - 475 mm- Distance Between Tie Bars: 280 x 280 mm- Centering Diameter (Ejector/Nozzle): 110 mm / 125 mm- Operating Hours (Pump): 766 hrs- Core Pull: 1- Heating Control Circuits: 3 electrical heating control circuits for mould heating, max. 2 kW/230 V- Cooling Circuits: Programmable machine-related cooling circuits, cooling water distribution with 3 free circuits (DN 13)- Nozzle Specifications: Open nozzle 18 mm with M 24x1.5 internal thread, flat nozzle tip, nozzle heating band- Control System: SELOGICA direct control with 15-inch (38.1 cm) touchscreen user interface- Connectivity & Interfaces: Basic Connectivity (CPU Ethernet port, IIoT Gateway), EUROMAP 67 robot interface (50-pin), EUROMAP 65 chip card operating authorization, CompactFlash & USB interface, Printer interface (serial USB), Interface for colouring/dosing unit

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Psdpjz Iqpyefx Akierc Price: On request

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 230 cm³, injection pressure: 2,500 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Prsdpfx Akjynbcnsiec delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Podpfxsz Iqrus Akierc Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Prodpsyt R S Asfx Akiec delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Prsdpeyiz U Tjfx Akisc Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. In excellent condition! Podpfx Akjzrvhljisrc Price for both machines: only €14,000.

Condition: used, Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Pedpfx Akoz Iqvaeierc Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, operating hours: 63,700 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 270S400-70 Baujahr: 2009 Pjdpfx Akexq R D Ejijrc Schließkraft: 40 Tonnen Holmabstand 270 x 270 mm Schnecken DN: 18 mm Dosiervolumen: 23 ccm³ Spritzteilgewicht 21 g/PS Steuerung: SELGOCIA Ausstattung: -Schnittstelle Roboter -Vertikale Einspritzung Betriebsstunden: ca. 63.700 Hours

Condition: excellent (used), Year of construction: 2015, Arburg 270C 400-70 Year of manufacture: 11.2015 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Pjdoz Iqwqopfx Akiorc Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/width/height: 3.18x1.43x1.98 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m Psdpfoz Eax Esx Akisrc total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Prodpfx Akezvm Azoisc - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW Pjdpfx Akexl Hpgoierc

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Podpfx Aoz Iqvmekiorc Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Prsdsx Rvciepfx Akioc Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available Psdsywzv Iepfx Akierc A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Psdpfx Akoyk Tlaoierc Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: repair required (used), Year of construction: 2019, operating hours: 14,967 h, functionality: not functional, machine/vehicle number: 750090, total height: 1,885 mm, total width: 800 mm, total length: 1,240 mm, We are offering this Arburg freeformer 200-3X machine for processing thermosetting plastics, year of manufacture 2019, which requires repair. Description of fault: Extrusion unit 1 is functioning correctly. Extrusion unit 2 is defective (the Arburg service technician suspects a problem with the piezo element or piezo driver). The machine had problems starting up. However, after repeated restarts, it is now functional. Manufacturer: Arburg Model: freeformer 200-3X with dual material preparation Year of manufacture: 2019 Condition: in need of repair Category ID: 1208 Type ID: 1354 Machine type: Machine for thermosetting plastics Machine number: 750090 Air heat exchanger for active machine temperature control Build chamber heating up to 120°C and temperature control for plasticization up to 300°C Equipment for inline material drying for material preparation 1 and 2 Predpfxs Adprlo Akioc Data preparation software (slicer) incl. license If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition Prjdpfxjzx Etwe Akioc

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Podpfx Akovl Skgsierc Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Prjdoxqfi Ajpfx Akijc Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Condition: used, Year of construction: 2001, operating hours: 78,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 250-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2001 Operating hours: 78,000 h Screw Ø: 18 mm Clamping force: 250 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer Predou Hqhqjpfx Akioc On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2005, clamping force: 400 kN, This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details. Podpfxjzh Ey Ae Akisrc - Model: ALLROUNDER 270 C 400 - 100- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor Rated Current: 59 A- Heating Rated Current: 31 A- Total Rated Current: 90 A- Total Connected Load: 54 kW- Control System: Selogica Control Panel- Additional Equipment: Integrated part discharge conveyor belt- Space Requirement / Footprint: 3.2 qm- Total Power Requirement: 15 kW- Lubricating Oil Type: Hyspin SP32 (Hazard class A2)- Oil Capacity: 160 l- Standards Compliance: CE Marked- Equipment: Integrated conveyor belt, control panel terminal- Optional: A cooling system and a second machine are available for an additional charge.- Until now, both machines have been running on the same cooling system.

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Pjdpfxjzp R Izs Akijrc terms of payment: 100% prior to delivery