Used Ehps for sale (29)

Condition: repair required (used), functionality: not functional, Year of construction: 1993, oil tank capacity: 390 l, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, pressing force: 150 t, table length: 3,550 mm, type of input current: three-phase, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: Lredpfx Absz E U Dpsysu The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: used, functionality: fully functional, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, pressing force: 250 t, table length: 4,050 mm, type of input current: three-phase, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Ljdpfx Asy D Sy Robyjru Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Year of manufacture: 1971 Weight: 10.000 kg - Year: 1971 - Serial number: 20956 - Drive system: Teach-in - Control system brand: Unimec - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Crowning system: None - Punch holder: Standard - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Lrsdjybdknopfx Abysu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Year of manufacture: 2004 Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lrodpeyvt Dzefx Abyeu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,600 mm, total width: 1,800 mm, total height: 2,780 mm, Year of manufacture: 1989 Colour: Beige Weight: 13.000 kg - Year: 1989 - Serial number: 121068 - Drive system: CNC - Control system brand: Delem - Control system type: DA-24e - Power [kW]: 15.0 Ljdez Rzqhopfx Abyoru - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 200 - Max. working width [mm]: 3100 - Column gap [mm]: 2650 - Backgauge depth [mm]: 800 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4600mm x 1800mm x 2780mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem DA 65W, bending force (max.): 230 t, working width: 4,300 mm, stroke length: 350 mm, distance between stands: 3,700 mm, operating speed: 10 mm/s, number of axes: 5, travel distance X-axis: 1,000 mm, overall weight: 22,500 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, power: 25 kW (33.99 HP), Press brake Lsdpjyvh S Tsfx Abyeru DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 12871, controller manufacturer: DELEM, controller model: EA 22, oil tank capacity: 120 l, overall weight: 10,000 kg, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake - including foot switch and the bending tool located on the machine Lrodpfsz I N D Nox Abyeu FCA D-35614 Aßlar - loaded onto a truck

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Ljdpfx Aez N Exgebyeru Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: good (used), Year of construction: 2005, control type: CNC control, controller manufacturer: Delem DA65, bending force (max.): 175 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, number of axes: 5, overall weight: 11,500 kg, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, power: 15 kW (20.39 HP), Max. bending length: 3100mm Ledpfx Ajyvz H Robyjru Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Lrsdpfxozkvk De Abyju

Condition: good (used), functionality: fully functional, Year of construction: 1995, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Lsdpfx Abezd S Theyoru Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from Darley. Type: EHP LS 50 15 12 CL Capacity: 1550 x 50 tons New Delem DA69T control system Ledez S H Easpfx Abyeru Y1, Y2, X, R, Z1, and Z2 CNC controlled Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Ledpfx Ajtqmvzobysru Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Lrjdpo Adzr Rofx Abyeu Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: excellent (used), Year of construction: 2008, Well-maintained used press brake by Darley Type EHP LS 230 43 37 Capacity 4300 x 230 tons New Delem DA69T control system Y1, Y2, X, R, Z1 and Z2 CNC controlled Hydraulic Wila New Standard top clamp Lredpfxsz S H Hdj Abyju Pneumatic Wila 13mm bottom clamp

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. Lrjdpfx Abox N Ibhjyeu In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, mileage: 398,700 km, power: 240 kW (326.31 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Mercedes Antos 2533 6x2 Heil Fronlader * Heil EHP 213134 * Waage * Drucker * Radstand ca. 4,20 m * Euro 6 * Automatik Getriebe * Federung: Blatt/Luft/Luft * ABS * Liftachse * Lenkachse * Rundumlicht * Staubox * Rückfahrcamera * el. FH el. Spiegel, Spiegelheizung * Luftsitz * Differenzialsperre Lrsdpeyulnnsfx Abyeu * Bluetooth * Radio * Reifen 315/70R22,5 ca. 40-40-40% * deutsches Fahrzeug * 1 Hand * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Lsdpfx Ajgz S S Ssbyoru Accessories/Equipment: - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers

Condition: used, mileage: 282,600 km, power: 240 kW (326.31 HP), first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Mercedes Antos 2533 6x2 Frontlader * Heil EHP 1787 * Waage Digi Sens + Drucker * Funkfernbedienung * hydr. Gabelverstellung * Radstand ca. 4,40 m * Euro 6 * Automatic Getriebe * Klima * Federung: Blatt- Luft- Luft * Liftachse * Lenkachse * Ad- Blue * Staubox * Rückfahrcamera * Differenzialsperre * Multifunktionslenkrad * Radio - Bluetooth - CD * el. FH + el. Spiegel * Spiegelheizung * Reifen 315/70R22,5 ca. 60-30-40% * 1. Hand * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, Lredpfev Itcvox Abyeu * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp * ·

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm Ledpob Rk Ekefx Abyoru - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Condition: new, maximum load weight: 29,820 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,765 mm, loading space volume: 30 m³, total length: 8,855 mm, total width: 2,550 mm, total height: 3,345 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper body with 30 m³ load volume HP tipper body, half-pipe tipper 2 units, identical – immediately available Overlapping hinged tailgate with grain slide New vehicle, immediately available! Unladen weight approx. 6,180 kg Equipment: - Fifth wheel height 1250 mm - SAF disc axles Intradisc CD - Axle lift, 1st axle - Control line for lift axle - Automatic tipping lowering - JOST geared landing gears, full load capacity - Braking system WABCO - Aluminum air reservoir - Semi-circular Hardox tipper body HB450 - Floor 4 mm / Side wall 3 mm - Overlapping hinged tailgate with lateral tension lock - Grain slide in the center + additional rotary locks - Double pendulum bearing and replaceable rubber seal - Roll-over tarpaulin with quick-release fastener - Operating platform on the frame - Hydraulic cylinder Hyva 250 bar - Tires 385/65 R22.5 Hankook TH31 - Steel rims Lsdpfx Aj Afa Sfobyeru - Rear lights, full LED Aspöck - 2x LED reversing lights - Toolbox - Water tank - Shovel and broom over the fender - Aluminum ladder - Paint RAL 7021, dark gray, tipper body + frame Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or purchase contract are binding. Please contact our sales team for detailed equipment and prices.

Year of construction: 2025, condition: new, New FERBERG mobile loading ramp from the manufacturer The FERBERG mobile ramp from the manufacturer is used in warehouses for loading and unloading containers and vehicles using forklifts, carts, etc. The loading dock ramp is a bridge between ground level and freight transport. Provides direct access for the loader to the vehicle body. Warranty 18 months. Having a CE Standard. Delivery throughout the country. Flexible system of discounts. Lrsdpoqxrhcofx Abysu Specifications: - Load capacity of mobile ramp – 8000, 12000, 16000 kg; - Total length – 9400, 11900, 13400 mm; - Carriageway width – 2000, 2500 mm; - Working height – 900-1750 mm; - Carriageway surface – zinc-coated anti-skid grating; - Height adjustment – using a hydraulic pump; - A special tow pole is used to move the truck loading ramp; - Color – grey. Complete set: - Mobile ramp – 1 pс; - Hand pump (made in Italy) – 1 pc; - Tow pole for transporting the ramp with a forklift – 1 pc; - Solid wheels – 2 pсs; - Rubber wheel chocks – 2 pсs; - Chains with carbine hooks – 2 pcs. Additional options: SL – Safety legs adjustable in height HR – Protective removable handrails TC – Tent cover CLR – Another color EHP – Electric (220V) hydraulic power station with a control panel EHBP – Electric (12V) hydraulic station with a battery pack Find out more on our website. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm Lrjdpfx Abouhf Tzsyou throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders Lredegxnkcjpfx Abyju -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm Lrjdpfx Abo Dqaqjyju electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm