Used Drawbar Device for sale (13,683)

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm spindle bore 21 mm taper MK 3 Blodju Twcljpfx Abbor weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Bledpfjxqxw Tsx Abber Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: ready for operation (used), Garant ST 1 Mobile Surface Roughness Tester Measuring Instrument Roughness Measurement Device Measuring range: 350µm, 180µm, 90µm (automatic switching) Further technical data can be found in the images. You are welcome to come by for an inspection. Bsdpsxv Ay Aofx Abbjlr We are happy to arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the article description may occur and are reserved.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 10-0162, PROLINER 10CS digital measuring device. Manufactured 2019. New battery and factory checks in 2024. Blodpfoxz Ed Uex Abber Software version 4 (decking). Includes trípod, 10m cable, spare battery and charger, 2 remote controls, hard travel case and soft rucksack case.

Condition: good (used), Year of construction: 1997, Measuring device for determining the amount of gas in the insulating glass Dimension: Length: 280mm Bedei Azc Aopfx Abbjlr Width: 204mm Height: 180mm Weight: 5.7kg

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Height: approx. 2.7m UK boom: approx. 2.6m Projection: approx. 1.40+1.40m = 2.8m Weight completely approx. 300kg Blodopwgrfepfx Abbjr Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing Bjdpfx Aeuvd Axobbslr - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. Bjdpfx Absxqxt Iobjlr The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Blodpfjxv Ampsx Abbsr Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Bljdpfxjw Izrce Abbor Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Bjdpsxu Iaxofx Abbelr Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Freely configurable set values Switchable between absolute and relative measurement modes

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Bodpfjxp H S Aex Abbjlr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2000, Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible. Blsdpfx Aoxuvnwobber

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling Bljdpfou Rwauex Abber - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs Bledpfoxmb Nwex Abber - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg Bjdpsu S Hywsfx Abbelr T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm *

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm Bljdpfxou Nwfuo Abbsr control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation Blodpfx Abju Nwwdobjr *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz Bljdpou Nw Ensfx Abbjr weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Bedou N Ad Njpfx Abbolr Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) *

Condition: used, Technical details: checking height: ca. 600 mm voltage: 220V / 80VA machine weight approx.: auf Anfrage kg dimension machine xH: Messständer: 0,75x0,45x1,04 m dimensions L x W x H: Messwertaufnehmer: 0,32x0,51x0,23 m Control unit module TPX Base plate/granite plate with T-slot: Size=L:650 x W:450 x H: 80mm Travelling beam travel Z = 600mm, by hand knob, and swivel 45° Measuring device, type perthometer PRK, size L:330 x W:150 x H:105mm; measuring head insert type Perthon RFHTB-250, Y-travel=60mm automatic/manual, as well as Z-travel=40mm via knurled wheel Measuring sensor, type Perthometer, digital display with printer Bjdpsu N Aw Njfx Abbjlr Equipped with accessory box with various measuring head inserts (photo comparable) *

Condition: used, Technical details: width: 655 mm depth: 500 mm height: 500 mm weight of the machine ca.: 197 kg dimension L-W-H: 420 x 655 x 500 mm model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with long holes * Bsdpfx Abeu N D Snebslr

Condition: used, Technical details: width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener Bsdpfsu N Eatsx Abbolr surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Technical details: Blodpsval Nrsfx Abber width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Technical details: Blodpfx Abswvibieber air flow rate: - m³/h suction stud diamter: 60 x 40 mm drive power: - kW turning speed: 2.800 m/min. electrics - voltage/frequency: 220/50-60 V/Hz weight: ca. 48 kg dimensions L x W x H: 600 x 580 x 600 mm total power requirement: 1,5 kW