Used Drawbar Device for sale (12,492)

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Ffedpfx Agov I Tdgs Dew # 7044

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Fsdpfxsxqxt Is Ag Defw Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Ffodpfexqxw Tjx Ag Dew Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: used, length 1000 mm width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m Fodpfx Agsh Ig Tpe Dofw used angle plate in good condition with several bores for clamping.

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW weight of the machine ca. t Fedpfx Asu Sbfdeg Dsfw dimensions of the machine ca. m

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Fsdpjwydbxsfx Ag Dsfw Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: as good as new (ex-display), The KHT H 3010 CNC + sheet holding device is a state-of-the-art guillotine shear from KNUTH, designed for precise and powerful cutting within the category of Guillotine Shears and the product group of Hydraulic Guillotine Shears. Built with a highly rigid frame and guided cutter bar, it minimizes twisting in the workpiece, ensuring optimal cutting accuracy while reducing rework. The user-friendly Cybelec Touch 8 control system operates via a touchscreen, allowing you to input the length, thickness, and strength of the plate material to automatically adjust kerf, cutting angle, and length for optimal results. This robust machine accommodates materials up to 10 mm thick, making it suitable for stainless steel sheets, while features like hydraulically regulated hold-downs guarantee steady fixation of materials during the cutting process. Safety is prioritized with advanced features like a light barrier and foot pedal emergency switch, adhering to the latest CE regulations. To expand the functionality of this Hydraulic Guillotine Shear, the innovative plate hold-up feature supports the plate during positioning for high precision. For further information, you can request a quote or order online. Ffedsq I Nb Topfx Ag Dew

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Fjdsxal Haepfx Ag Djfw Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Haas Laser HL 1203D Optical configuration: 22-31-21-BX Laser class 4 1500 W 1064 nm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! Fsdpfoxam Ryox Ag Defw International shipping costs on request!

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), High-pressure cleaning device, high-pressure rinsing device, high-pressure rinsing device with suction device on hot-dip galvanized and painted high quality steel frames with forklift lugs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction power - Petrol engines: for suction Honda GX390 8,8kW and for cleaning - Honda GX690 17,9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction power - Diesel engines: for vacuuming Yanmar L100 8,0kW and for cleaning Kohler KDW 1003 18,9kW high pressure pump 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium HIGH PRESSURE HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 50 m ½" High pressure hose Hose: 50 m ½" High pressure hose (Included) LOW PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 35 m ¾" Low pressure hose Hose: 35 m ¾" Low pressure hose (Included) FUEL TANK: Capacity: approx. 13 l WATER FILTER: Fedjfdkb Eopfx Ag Dsfw With washable cartridge and drain valve Filtration degree: 50 mesh IN THE SCOPE OF DELIVERY: Multifunction radio remote control IMET; - On / Off Motor; - On / Off bypass; - Electrical speed control +/-; - Emergency stop button; Battery charger for radio remote control; 300 o. 500 l water tank made of polyethylene; OPTIONAL ON REQUEST: 60 m ½" High pressure hose; Pulsation/booster pump; ACCESSORIES ON REQUEST: Kit STORZ for the connection to the water hyd

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally Fodpfx Aoyhq A Dsg Dofw - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Hydraulic machine vice, high-pressure clamp KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Ffedpfx Aed Amwieg Djw Guideway height: 140 mm - 2 clamping ranges adjustable via locking pin - Swivel base plate Dimensions (L x W x H): 900 x 400 x 210 mm Net weight: 125 kg Good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Fjdpfx Aspy Uzyjg Defw Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: new, functionality: fully functional, New device Enmair Electro-pneumatic sprue picker ER available immediately from stock ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Swivel angle to the right / left, as required Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. Fsdjr A D Itopfx Ag Djfw User interface: English, Dutch

Condition: like new (used), functionality: fully functional, For use on milling machines with easy mounting on the machine table. Adjustable mitre stop 30 - 150°. Sliding carriage moves smoothly on ball bearings. Base plate length 1000 mm. Slide travel 710 mm. Slide plate size 295 x 255 mm. Overall height approx. 56 mm. Fodjymlivjpfx Ag Djfw

Condition: like new (used), Tower Clamping System TS 125 Magnum Jaw width: 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Height: 780 mm Clamping stroke per clamping slide: 64 mm Clamping force: 40 kN Price: €7,850.00 + VAT Position 2 4 pcs. hydraulic vices Jaw width: 125 mm Ffjdpfjic Rnusx Ag Dew Length: 400 mm Price per unit: €850.00 + VAT Price for 4 units: €3,000.00 + VAT Position 6 Preci Tool NC, type 125 Jaw width: 125 mm Length: 430 mm Only 1 fixed jaw Price: on request Position 8 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Price: €850.00 + VAT Position 9 HILMA machine vice mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 550 mm Price: €900.00 + VAT Position 10 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 380 mm Price: €650.00 + VAT Position 11 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Price: €850.00 + VAT Position 12 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 620 mm Price: €1,050.00 + VAT Position 26 HILMA machine vice (Trade Fair Version) Jaw width: 125 mm Length: 430 mm Price: on request Position 28 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 570 mm Price: €700.00 + VAT Position 32 Angle plate Clamping surface: 160 x 420 mm Price: €150.00 + VAT Position 33 Angle plate with HILMA vice Jaw width: 125 mm and force measuring cell Price: €450.00 + VAT

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Fedpfx Aewccnpeg Dofw Further information available upon request.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Fodpfxjyfz Ule Ag Defw Repeatability: 0.01 mm MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: good (used), Body lifting and alignment device Belt conveyor table with lifting and alignment device Fedpfx Asvdcmvog Dofw Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m Fedpsvf Riujfx Ag Defw For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Ffedjvibc Hepfx Ag Dow Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91569581, Year of construction: 2013, load capacity: 1,000 kg, lifting height: 2,500 mm, construction height: 1,800 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,330 kg, Equipment: UVV, Jungheinrich ERC 210 Electric High-Lift Stacker with Rotator and Remote Control Year of manufacture: 2013 Battery capacity: 375 Ah at 24 Volts Load capacity: 1,000 kg Lift height: 2,500 mm with folded operator platform; approx. 1,050 mm with unfolded platform Overall height: 1,800 mm Fork length: 1,150 mm Weight: approx. 1,330 kg including battery The machine can also be operated with the operator platform folded and, via remote control, the hydraulics can be operated—lifting, lowering, and rotating. From the neutral position, the forks can be rotated 24 degrees in either direction. Operation is also possible without the remote control. The unit is in excellent working condition and immediately ready for use. Includes battery charger. Affordable delivery by specialized transport company available. Check out our other listings as well. We always have a wide selection of high-lift and low-lift trucks and forklifts in stock. Fjdpsyi E U Rsfx Ag Dsfw Do you need spare parts for your forklift, high-lift truck, etc.? Just contact us.

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece Ffsdpfx Aob A Ivzeg Djw

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Payload: 1,000,080 kg Extendable body: Yes Technical condition: very good Optical condition: very good GOLDHOFER THP/MT/ST 28 HYDRAULIC AXLE WITH 1X GOOSENECK, 2X POWER PACK, 2X DRAWBAR + DRAWBAR HEADS THP/MT/ST MODULES: 2x 2-axle module 2x 4-axle module 2x 5-axle module 1x 6-axle module 1 heavy duty gooseneck with hydraulic power pack 2x drawbar control kits Central lubrication system BPW hydraulic pendulum axle 8 tyres per axle line Fodpfew D E Tdex Ag Dofw Remaining tyre tread approx. 50% Size 215/75 R 17.5 Year of module manufacture: 2009 to 2012 The complete axle set has new German TÜV inspection / APK / MOT Permissible total weight: 1008 tons at low speeds Follow us on Instagram: geurtsTrucks We speak German We speak English We speak Spanish

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Fjdpfx Aoyqr Sxog Dofw