Used Crash Barriers for sale (859)

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) Iiedjxpximepfx Amieb - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Ijdpfxswzyh Rj Amioib Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: Iijdpfx Ameu R S Nwoiob - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2002, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) Iisdpfjy Hhwdox Amisb • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: used, Used roll container with three insertable barriers, measuring 800x720x1620 mm. The three insertable barriers ensure that the load is securely confined. When the containers are not in use, the roll containers can be stored in a practical and compact manner. Isdpoy Hpt Tjfx Amieib By removing the insertable barriers from the plastic bases, it is possible

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 41,569 h, machine/vehicle number: 77510200, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC 3i, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser source model: C4000, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, On behalf of an authorized party, we are offering the following used item for sale by bid: Amada CO² Laser Cutting Machine Model FO-3015 NT II RI Laser Machine FO-3015 II RI Model: FOM2RI3015-C4 Operating hours: 41,569 h Laser specifications: 4,000 W CO2 Laser / Flying Optics Working area (X x Y): 3,070 x 1,550 mm Controller: AMNC 3i (21.5" screen size) Serial No.: 77510200 Year of manufacture: 2013 Including transformer TG513 Serial No. 987 Including cooler-extraction combination Ijdpfx Asy Iwixemisib PC5011FOm24kw Serial No. 7196850001 LST3015 RI pallet changer for FOM23015RI LSTRI3015-CL Serial numbers: (30153398) Full demineralization unit type B5 Serial No. 31164908 with cartridge and conductivity meter Other condition notes: Last maintenance by Fanuc: 05.01.2023 at 38,095 h - Replacement of O-rings on the laser tube - Replacement of internal mirrors Turbo blower replaced at 24,000 h - Next replacement due at 48,000 h RI unit pneumatic valves partially leaking, inspection required Including various light barriers and a safety fence for the loading and unloading area Price is ex works/collection. The item is located in Erftstadt and must be collected by the buyer at that location. This offer refers exclusively to the described item. Other items possibly shown in the pictures may be part of a different offer. Errors subject to change. Inventory number: 2893-82

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) Iiodpfx Amjy S Aakoiob (Prices may change with significant exchange rate fluctuations)

Condition: used, mileage: 48,050 km, power: 100 kW (135.96 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,198 mm, total width: 2,070 mm, total height: 2,744 mm, loading space length: 3,100 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Internal vehicle no.: 9334X ----Why autonext GmbH? Ijdpsw T Tuyjfx Amijib One of the largest commercial vehicle showrooms in Germany Always over 400 vehicles immediately available at Largest selection – Best price More than 1000 satisfied customers per year – Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition 1 owner, German vehicle, non-smoker vehicle Full service history, serviced exclusively at Opel Brake system front and rear like new All-weather tires front and rear like new Body configuration: L3H3 Super High Roof Glass transporter Reversing camera Navigation system Rear parking sensors Air conditioning Upon request, we can retrofit a tow bar for only €599. If possible, also a towing capacity upgrade up to 3.5t. ---- Special equipment: * Cargo Pro package * Rear entry step * Wooden floor in cargo compartment * Wood interior paneling in load/passenger area: high * Rear wing doors (270° opening angle) * LED cargo area lighting * Cool & Sound package * Audio Navigation System Navi 50 IntelliLink Pro (DAB+) * Air conditioning * Interior pollen filter * Light Package 1 * Fog lights * Automatic headlight activation * Rain sensor for wipers * All-weather / all-season tires * Rear parking aid incl. reversing camera * Tire repair kit * Cabin seating: double passenger bench Standard equipment: Visibility package, automatic headlight activation, rain sensor for wipers, driver’s airbag, anti-lock braking system (ABS), drive type: front-wheel drive, exterior mirrors electrically adjustable and heated, single tires on 2nd axle / rear axle, driver assistance system: crosswind assist, electric windows front, 185 A alternator, 6-speed gearbox, interior pollen filter, body/build: large-capacity panel van standard, variant: vehicle length L3, variant: maxi roof (H3), fuel tank: 80 L, solid cargo barrier (no window), adjustable steering column (steering wheel), headlamp range adjustment, maxi roof H3, GVWR 3.5t, facelift/model update, engine 2.3 L – 100 kW BiTurbo CDTI, wheelbase 4332 mm, medium wheelbase, low emissions as per Euro 6d-TEMP standard, sliding door right in load/passenger compartment, side marker lights, cabin seating: driver’s seat with armrest, LED daytime running lights, central locking with selective remote, GVWR 3.5t. ----New main inspection / emissions test on request. ----Warranty & "TÜV Professional Check" naturally available! We are happy to take your vehicle in trade! We can also create a tailored financing or leasing offer for you! No down payment, possible to redeem at any time, with special repayment options. Please address your wishes to our sales team – we’re happy to advise you. ----Arrange a test drive and let the quality of our vehicles convince you. Appointment hours: Mon-Fri 08:30 – 18:00, Sat 09:30 – 13:30 ----Also find us at We look forward to your visit! ----Subject to error and change. The equipment featured online is not part of the contract and must be verified on site.

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel Iodpjx D E Huofx Amieib • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm Iijdpfovcbf Iox Amieb - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 20,000 W, Description BAISON H13 (12 meters) (20 kW) H-BEAM AND PLATES HEAVY DUTY FIBER LASER CUTTING MACHINE GANTRY TYPE WITH ±90° BEVEL HEAD This machine is also for plates, H, U profiles and different shape + inclined cutting. Technical specifications Laser Power 20.000 W (Raycus) Max. work area (L*W*H) 12.000* strait 2.000* bevel 1.200*600 mm Min. work area(W*H) 150*150 mm Max. Speed 40m/min Max Acceleration 0.4 G X-axis (straight cuts) 2.000 mm X-axis (bevel cuts) 1.200 mm Y-axis 15.000 mm Z-axis 1.000 mm Positioning Accuracy (X/Y) ±0.1 mm/m Repeated Positioning Accuracy (X/Y) ±0.1 mm Power Data 94kw / 151A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 20.741*4.373*3.576 mm Machine Weight 8.450kg (Excludes platform) ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 20 kW Special Bevel head ±90° system for cutting H-beams and plates – BOCI Controller system – FSCUT 9200-P Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – JT Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Electronic Components – SCHNEIDER / PHOENIX Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit CE mark with safety light barriers - Machines for cutting H-beams profiles and plates - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) Iisdjvcb Aaopfx Amiob - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Ijdpfxjvcbw Do Amioib Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Iedpfxsvcbrhs Amijib Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 1994, with light barriers Iijdpjy Anf Tjfx Amijb short term available

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity 1000 x 3.5 mm - electric foot switch - side stop left 600 mm, two supports each 600 mm - central lubrication Iiedpfx Amsy St Hzjieb - Ortlinghaus brake-clutch combination - pneumatic tilting roller table or lifting with plastic rollers - rear stop area protected by light barrier - operating instructions

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ Iodpfx Aoy D Npcjmisib • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Iisdpfx Amjy D Nmnsijb Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: ready for operation (used), Year of construction: 2010, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support Ijdpfxex D I H De Amisib • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, Year of construction: 2001, Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s. Capacity: 40000 bo/h Pneum. working pressure: 10 bar Power: 11 kW Current: 25 A Voltage: 230/400V, 24V control voltage Frequency: 50 Hz Length: 2900 mm Width: 1260 mm Height: 2000 mm Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps Operation / Control: Simatic S7 Iedpfx Asxbqg Uomioib Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet

Condition: used, Year of construction: 2012, Pallet film wrapper Additional title: Pallet film wrapper Max. capacity: 55 pal/h at max. 1600 mm height (standard height 2300 mm) Rotation speed max.: 20 rpm Power: 4 kW Current: 7,5 A Voltage: 400 V Frequency: 50 Hz Weight: 1500 kg Formats: Pallets with 1200 x 800 mm (max. 1200 x 1200 mm, min. 600 x 800 mm) Running direction: right -> left Operation / Control: On-site control box Material: Black steel painted Position: free-standing Iiedpew Tar Sjfx Amieb Base construction: Frame construction bolted to the floor Features: Satellite winder with integrated cover sheet dispenser, Powerstretch film pre-stretching system "S:C:S:P", clamping system "Genesis", protective grille and muting system, safety barriers, pneumatic hold-down device, 2 roller conveyors in the winding area

Year of construction: 2017, condition: used, Empty bottle inspector for monitoring empty glass bottles. The machine uses cameras, high frequency, and infrared to inspect the following criteria: - Contour, height, color - Side wall - Residual lye detection - Mouth - Thread - Residual liquid detection - Bottom inspection - Glass shards and film detection - Sealing surface inspection Bottles that do not meet the specifications are ejected via pushers. Iiodsyr Ifkopfx Amisb Additional title: Straight-running machine in modular design Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Water: 3-5 bar Compressed air: 6-10 bar, 1/2" connection Length: 2980 mm Formats: 1,0 l; 0,5 l; 0,2 l Running direction: right -> left Operation / Control: Simatic S7-300 Position: standing on feet Base construction: straight-running Features: camera, side wall modules, test bottle detection, high-frequency and infrared inspection, side opening inspection, thread inspection, sealing surface inspection, light barrier, pushers at inlet and outlet, diversion control, operating panel

Condition: used, Electronic scanning for checking the lid deflection. A special sensor is fitted above the flow of bottles or cans in free flow and measurement begins after the trigger light barrier has been passed. The sensor is continuously scanned according to the measuring cycle. Faulty caps are detected and ejected on the basis of the cap deflection. Additional title: with discharge Performance: 90000 objects/h Max. speed conveyor: 1,72 m/s Ambient temperature: 60 °C Power: 25 W Current: 230V AC Operation / Control: Control unit with keypad and digital display Features: Light barrier, scanning sensor, discharge BBull Soft-Push Iodpew Tmpkefx Amijib

Year of construction: 2022, condition: used, Packaging machine for packing PET bottles in plastic crates. The machine is set up in a T-layout. The packing curve and cycle times are freely programmable. The machine packs 0.5 l and 1.0 l PET bottles in crates containing 20 or 9 bottles respectively. Retrofitting to other formats is possible. Additional title: Gripper head packer for packing PET bottles into beverage crates Max. capacity: 24000 bo/h referring to 0.5 l bottles Cycle time: 400 cycles/h Number of packing heads 0.5 l: 3 pcs. Number of packing heads 1.0 l: 5 pcs. Iisdpfx Asxykv Tjmijb Power: 13,7 kVA Voltage: 400 V Frequency: 50 Hz Compressed air: 4.5 m³/h, 6 bar, 3/8" connection Weight: 2900 kg Formats: 0.5 l and 1.0 l PET bottles; 20-bottle crates for 0.5 l (in a 4x5 arrangement); 9-bottle crates for 1.0 l (in a 3x3 arrangement) Running direction: Longitudinal run for 20-litre crates; transverse run for 9-litre crates Operation / Control: Simatic S7 Material: Base frame, attachments, control cabinet and conveyors made of stainless steel 1.4301 (AISI 304) Position: T-formation Base construction: on base frame with height-adjustable dome feet Features: Gripper head carriers, gripper heads, light barriers, bottle table, bottle guide plates, bottle completeness check, vibrators, frequency-controlled bottle transport, machine safety doors, touch panel with user guidance, control cabinet

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Iisdpfx Amoxy Tmnjieb

Condition: refurbished (used), Year of construction: 1995, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, installation height: 500 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Iiodpfx Ameu Hyx Ssijb Installation height 500 mm stroke: 300 mm Table: W x D 440 x 320 mm Machine will be overhauled: - new control - new light barrier - revision of the hydraulics