Used Crash Barriers for sale (876)

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, Shoe soles are only roughly cleaned w􀇕th a dry curly hyg􀇕ene mop. For hand d􀇕s􀇕nfect􀇕on, two hands are s􀇕multaneously 􀇕nserted 􀇕nto two separate chambers on the front of the mach􀇕ne, and the solut􀇕on 􀇕s sprayed as soon as the hands are detected by the sensors. There are Red/Green LED warn􀇕ng l􀇕ghts that 􀇕nd􀇕cate that the process has been completed and completed. After the person's hand d􀇕s􀇕nfect􀇕on process, he/she 􀇕s g􀇕ven perm􀇕ss􀇕on to pass through the turnst􀇕le. Dry curly mop for clean􀇕ng shoe soles and d􀇕s􀇕nfect􀇕on of hands are carr􀇕ed out together. IT IS MANUFACTURED FROM 304 CR STAINLESS MATERIAL. A HYGIENE MAT IS AVAILABLE. The Hyg􀇕ene Mat can be eas􀇕ly replaced 􀇕f des􀇕red. It prov􀇕des hyg􀇕ene qu􀇕ckly and e􀇖􀇕c􀇕ently 􀇕n any locat􀇕on needed 􀇕n the fac􀇕l􀇕ty. It 􀇕s eas􀇕ly portable and can be 􀇕nstalled anywhere. A mandatory hand d􀇕s􀇕nfect􀇕on 􀇕s prov􀇕ded for two hands s􀇕multaneously, and the hand d􀇕s􀇕nfect􀇕on t􀇕me can be adjusted. It does not allow one-handed passage. Ijdozg A Emspfx Adqjtk There 􀇕s an adjustable turnst􀇕le lock accord􀇕ng to ex􀇕t d􀇕rect􀇕on and preference, and the turnst􀇕le durat􀇕on can be adjusted. Approx􀇕mate d􀇕mens􀇕ons 86.5 cm (length) x 60 CM (w􀇕dth) x140 CM (he􀇕ght) 304 CR Sta􀇕nless Steel ra􀇕l􀇕ng 􀇕s ava􀇕lable. FREE PASSAGE WHEN THERE IS NO ELECTRICITY. There are he􀇕ght adjustable legs. There 􀇕s a sta􀇕nless carry􀇕ng plate for d􀇕s􀇕nfectant can􀇕sters on one s􀇕de of the dev􀇕ce. IT OPERATES WITH 220 V ELECTRICITY

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead Itedpfxjyr E Ezo Adqok - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 47 mm manual fence adjustment to size main motor power 4 kW cast iron body Itjdpfx Aexdw Rfedqok safety light barriers power supply 380V

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Iedpfx Adsy Tliwsqetk Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting machine TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Operating hours: 59821 hours Laser beam on: 36350 hours Standard equipment: Machine - Enclosed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Working area lighting - Positioning laser diode - Spray device - PierceLine Itodpfx Ajza Daaodqek - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the internet Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with certified viewing window door on the right - Sliding roof + Nozzle changer

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces Ijdpfxezuzt Ej Adqjtk - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Ijdpfx Adsv Hpnleqetk New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 Ijdpsuak Nlsfx Adqjtk 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Itjdox Urrhjpfx Adqjk Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) Ijdpfxowugczo Adqstk 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Iodpfsw A Rv Ijx Adqotk Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge Iodpfx Adoxaa Dgjqetk * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. Itodpfx Adjw H Rc Nsqjk - Straight line gluing - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Condition: excellent (used), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z-axis: 1.25 microns Precision in X and Y-axis: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Iedjzd Tugspfx Adqjtk Sensor for detecting filament end Print recovery system Liquid cooling Double-tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale from location!) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2021, machine/vehicle number: 168600, Reference No. 26029 Technical Data: - Max. cutting width: 2080 mm - Max. cutting capacity at 45 Kp/mm²: 6 mm - Throat depth: 150 mm - Automatic cutting angle adjustment: 0.3 – 2° - Automatic cutting gap adjustment Itjdpfx Adeywhuwjqok - Number of hold-downs: 10 pcs - Strokes per minute: up to 22 1/min - Front angle gauge approx.: - 2 front support arms approx.: - Motorized backgauge with positioning control up to 1000 mm - Rear area safety device with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot switch - Drive: 400 V / 11 kW - Space requirement approx.: W 3150 x H 2150 x D 2300 mm - Weight approx.: 4.8 t

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers Ijdpfxsy Tn D Do Adqjtk - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Year of construction: 2009, condition: used, 3-axis machining center for aluminum or PVC profiles for top-side processing Max. Travel distance X-axis: 2,450 mm Max. travel Y-axis: 350 mm Itedpfx Aozrhd Eedqok Max. travel Z-axis: 280 mm Windows control with 2 USB connections Speed up to 18,000 rpm. Minimal quantity spray device 4 pneumatic material clamps Light barrier

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, stroke length: 650 mm, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Iodpfsv E Rd Eex Adqjtk Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-260018, FICEP Flex FRC 1201 Notching Machine The Ficep FRC 1201 notching machine is part of the modern Ficep Flex series of notching machines. This modern CNC-controlled notching machine is designed for the rapid thermal cutting and notching of H, U, L, flat, and square tubes. The steel profile is positioned in the machine at the cutting location via a roller conveyor using a pulling tong carriage. A robotic arm equipped with the cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD plasma power source, suitable for material thicknesses up to 32 mm, is used. Thicker materials or phase cuts larger than 32 mm are cut using the oxy-fuel cutting unit. Conveyor System: On the infeed side, in front of the Ficep Flex FRC notching system, there is a chain-driven cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a sturdy roller conveyor using a clamp-type measuring cart. The system is designed for 12-meter-long profiles and therefore features 12-meter-long roller conveyors on both the inlet and outlet sides, each with a roller track width of 1,300 mm. To remove the finished components on the outlet side, four chain-driven cross conveyors, each 6,450 mm long, are located downstream of the notching station. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC control system from Mitrol. This reliable CNC control system, manufactured by Ficep’s in-house supplier Mitrol, features Pegaso software, including remote maintenance capabilities and a data transfer interface. Torit DCE Filter Unit The filter unit for dust extraction is a Donaldson Torit DCE. Safety: via fence and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Ijdpfxjzmbgvs Adqetk Weight: 7,000 kg Weight of cutting unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching machine is in very good condition.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion Isdpfxoy Edfzo Adqotk • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar

Condition: used, Year of construction: 2022, gebraucht 2022 8254 prompt, Zwischenverkauf v Türkei 22240 € 1 30 to 1250 mm X und Y Achse 150 mm 1010 mm 255 mm 265 mm hydraulisch 210 mm/s 10 mm/s Itjdpfx Adowirqyjqek 3 kW 1760 mm 1375 mm 2135 mm 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5511141, cutting width (max.): 550 mm, Cutting machine EBA 551-06 LT, working width 55 cm, with light barriers, air table, program control, rear table cover, year of manufacture 2011, machine number 5511141, in good condition, immediately available. If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment. Itedpfezkcgljx Adqjk

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets Iodexfg A Tspfx Adqotk - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 Itedpoyackwefx Adqek 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Itsdpfx Aezmrhksdqsk Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h