Used Crash Barriers for sale (853)

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 500 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 400 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 Dodpfxeib H D Es Ag Doup 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank The scope of delivery includes 01x crash barrier, used Total length: approx. 2,575 mm Clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of each: Duedpfx Agehpuths Dop 02x frame profile, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x Post, second-hand Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 80 x 10 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Duedpfoib H Dtjx Ag Djp Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 400 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 300 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: good (used), The scope of delivery includes: 01x crash barrier, second choice Material color: yellow / black / galvanized Total height: approx. 400 mm Total depth: approx. 180 mm Clear width: approx. 2,000 mm Consisting of each: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile dimensions: CS: approx. 300 x 80 x 25 x 15 mm Dodpfxetq Ebde Ag Doup Material thickness: approx. 2 mm Length: approx. 2,000 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: approx. 400 mm Side length: approx. 170 x 170 mm Material thickness: approx. 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied completely delivered pre-assembled. Remark: Other lengths are available on request. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x crash barrier, used f. Double rack rows Total length: approx. 2,500 mm Total height: approx. 400 mm Total depth: approx. 305 mm Consisting of each: 02x L collision protection corners, used Material color: orange Total height: approx. 400 mm Total depth: approx. 305 mm Total width: approx. 265 mm Material thickness: approx. 4.00 mm 01x U-rails, used Material color: orange Duedpfxevawqbe Ag Dep Total length: 2,480 mm U-profile: 100 x 50 mm Oblong hole: 40 x 15 mm Material thickness: approx. 6.00 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Djdpfx Aoyk Uuijg Djup Size: 3x1.5m Working area Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia Price: 155 000€

Condition: good (used), BLB GmbH – Supplier of new and used warehouse technology. We provide racking systems, industrial trucks, accessories, and further warehouse equipment. Dedpfx Ajxqpddog Deup This listing includes the following: Used pallet racking Manufacturer: Bito Type: P25 Frame condition: used / pre-assembled Beam condition: used Quantities: Approx. 88 frames – height 4,500 mm / depth 1,100 mm / max. bay load 13,000 kg / galvanized Approx. 320 beams – length 3,600 mm / capacity 3,500 kg with evenly distributed load, painted green Including locking pins Larger or smaller quantities possible! Please inquire about your required quantities. Additional accessories available at extra cost: Floor anchors Column protectors Crash barriers Wire mesh decking Price is gross including 19% VAT. An invoice showing VAT will be issued. Collection by the customer is welcome / Free loading / Nationwide shipping can be organized / Please inquire about shipping costs. Sale of used items without warranty or guarantee. Errors and prior sale of used goods expressly reserved.

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding Duedsp I E Taepfx Ag Dsp 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Impact protection Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: new, Year of construction: 2024, sheet thickness steel (max.): 4 mm, working width: 600 mm, coil weight: 6,000 kg, Rollforming Line for production of * Guard Rails, Highway Road Barrier, Crash Barrier Profiles RAY-A, C, RAY-B, OMEGA, SIGMA, 3M, 3 WAVE * Solar profiles C and U. Automatic width adjusted line for thicknesses between 1 - 4 mm. * Cable Tray and Ladder Profiles also other standard and customized profiles .. Consists of: DECOILER Motorized Hydraulic Expansion 6 Ton Capacity COIL CAR 6 Ton Capacity SERVO FEEDER Dsdstq R Uyepfx Ag Dsup ENCODER FEEDER HIGH-SPEED H FRAME PRESS (160 stroke/min.) HIGH-SPEED PERFORATION PERFORATION TOOL LOOP AND SENSORS ROLL FORM TURK HEAD SHEAR MOTORIZED CONVEYOR AUTOMATED JOINING UNIT Material 0.8 mm CR Steel. BOSPORAS Technologies Machinery provides a complete turnkey metal roll forming solution with high quality and competitive prices. The lines that we are experienced: GUARD RAIL PRODUCTION LINES C, U, Z AND SOLAR PANEL PROFILE PRODUCTION LINE LOGISTIC WAREHOUSE TRAVERSE PRODUCTION LINE CABLE TRAY PRODUCTION LINE MARKET SHELVING PRODUCTION LINE SUSPENDED METAL CEILING PRODUCTION LINE SOLAR FRAMING AND RACKING PRODUCTION LIGHTING FIXTURE BODY AND LID PRODUCTION LINE PANEL RADIATOR TOP AND SIDE COVER PRODUCTION LINE METAL GRID AND PLANKS PRODUCTION LINE METAL DOOR AND DOOR FRAME PRODUCTION LINE PVC WINDOW GYPSUM BOARD PROFILE PRODUCTION LINE AGRICULTURE AND ANIMAL HUSBANDRY PRACTICES AGRICULTURAL VEHICLE APPLICATIONS PAINTING PLANT PANEL PRODUCTION LINE AUTOMOTIVE INDUSTRY APPLICATIONS COIL PUNCHING APPLICATION HOUSEHOLD APPLIANCES INDUSTRY APPLICATIONS and other customized roll-forming machinery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the equipment within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS X-axis travel: approx. 1500 mm Y-axis travel: approx. 4500 mm Z-axis travel: approx. 600 mm Laser power: 3.2 kW Table dimensions: 3500 x 2000 mm MACHINE DETAILS Lifting device model: TRUMPF LOADMASTER Number of suction units on lifting device: 12 Lifting device features: Light barrier system Djdpfoylalvjx Ag Deup Dimensions & Weight Dimensions (L x W x H): 12000 x 7000 x 2400 mm Machine weight: 15 t EQUIPMENT Shuttle table Additional laser head Accessories Note: The laser cutting system can be transported on trucks up to 3000 mm in width, so no special permit is required.

Condition: good (used), functionality: fully functional, Year of construction: 1999, CNC electric press brake from Safan Model: SMK 2050 40 Capacity: 2050 x 40 tons TS1 CNC control Y1, Y2, X and R axes Pneumatic flat table Light barrier Dedpfx Agjytbxyj Doup Year of manufacture: 1999

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air) • Light barrier • Programmable • Jogger – RAB2 • Lift – L600-3 • Three extra spare knives • In production • Available: 05/2026 Duodpfx Aoytb A Seg Dsp

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Dedpfx Agsyhd I He Dsup Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm

Condition: used, Nieużywana i nigdy nie zainstalowana linia do napełniania fiolek produkcji Steriline, wyprodukowana w 2021 roku, o wydajności do 24 000 sztuk fiolek na godzinę. Linia została zaprojektowana do pracy w systemie zamkniętym oRABS (Open Restricted Access Barrier System) i obecnie jest w stanie napełniać fiolki o rozmiarach 6R (5 ml) i 2R (2 ml) zamykanych korkami do liofilizacyj / iniekcji lub aluminiowymi kapslami. (Producent może dostarczyć części wymienne do fiolek i korków o innym rozmiarze.) W skład linii wchodzą urządzenia wymienione poniżej: Główne urządzenia wchodzące w skład linii: - Rotacyjna maszyna myjąca RC-V8 - Tunel depirogenacyjny ST9-CCS - Ładowarka tacek / TL2 - 4 Urządzenia LAF (laminarny przepływ powietrza) - Napełniarka fiolek VFM400 + oRABS - Przenośnik taśmowy SWB1 + oRABS - System rozdzielania dodatniego PDS + oRABS - Zamykarka fiolek VCM400 + oRABS - Przenośnik taśmowy SWB2 - Przenośnik taśmowy LBT - Przenośnik taśmowy SWB3 - Stół obrotowy RT Dodatkowe urządzenia wchodzące w skład linii: - 2 Autoklawy Fedegari FOF4/9 - System oczyszczania wody Veolia Waters Orion 6000 E WPU - Wytwornica pary czystej Steris Finn Aqua - Wielostopniowy destylator wody Steris Finn Aqua - Kompresor powietrza Atlas Copco ZT37VSD WP - Zbiornik magazynowy wody WFI o pojemności 15 000 litrów - Zbiornik magazynowy wody WPU o pojemności 6000 litrów - Główna szafa sterownicza - 2 wytwornice pary Certuss - 2 Ekonomizery Permak i pompy - System dystrybucji wody WPU i WFI (urządzenia systemu dystrybucji: rury, zawory, pompy itp.) - Panele i sufity do pomieszczeń czystych Dujdeyhc Sqjpfx Ag Djp - Agregat chłodniczy Daikin Pełne specyfikacje projektu dostępne wraz z instalacją.

Condition: used, Year of construction: 1974, Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) Labelling Machine – Enos Euro C5000 (2019) Capacity: Up to 5,000 containers/h (depending on label and format) Formats: Bottles, cans, other cylindrical containers Application: Labelling Configuration: Manual side-barrier adjustment (tool-free) Scope of Delivery  Isobaric Filling Machine | Schilpp | Contibloc 20/5 | 1974 | 20 filling valves, 5 crown capping heads Labelling Machine | Enos Euro | C5000 | 2019 | Manual side-barrier adjustment   Dsdpfsyr Nr Ssx Ag Djup

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment Dusdpfx Aoyrhvvsg Djp - SP 9 control unit - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 12 mm rear stop 1000 mm cutting angle 0,5 - 3,0 ° down holder 18 Stk no. of strokes 7 - 14 Hub/min oil volume 350 l total power requirement 22,5 kW dimensions of the machine ca. 4200 x 2000 x 2250 mm weight 8500 kg Equipment: - Haco SP 8 control unit - electro-hydraulic guillotine shears - "guided by a guide rail" - electric backgauge - electric cutting gap adjustment - electric cutting angle adjustment - 1x side stop - front finger guard - rear safety device ( light barrier ) - emergency stop device Dodpfoypv Uzjx Ag Doup - 1x freely movable foot switch - operating instructions

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,270 h, travel distance X-axis: 1,505 mm, travel distance Y-axis: 3,005 mm, travel distance Z-axis: 210 mm, number of axes: 5, This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details. • 1500x3000 Table • 30HP Hyperthermal Pump • 4100 Bar Pressure • 1290 Hours • Joystick (Faulty, needs repair or removal, but functions without the option) Additional equipment • Cooling Radiator with Barrier and Hardware Dedpfx Aoytf T Iog Deup • Salt Softener Included • Consumables Included • Pump/Tank/Filter Drain for Sale

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes Djdpoytcalofx Ag Doup

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier Dujdpfx Agjynnk Ej Dop - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Djdpfsxaa Eqsx Ag Djup Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Year of construction: 2009, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB connections Speed continuously adjustable up to 22,000 RPM Duodpoyqyaqefx Ag Djp handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 light barrier ranges and 2 material stops, enabling pendulum operation A total of 8 material clamps Spindle in good condition, spindle-insertion force: 12 kN Weight: approx. 2,000 kg

Condition: ready for operation (used), Year of construction: 2020, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, overall weight: 23,500 kg, total height: 3,470 mm, This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Additional equipment • Control Console: Double footswitch console Machine Benefits Technical Machine Benefits • Machine in excellent condition, with very low working hours – practically like new • Some tools are included in the offer • Stroke axes: Y1–Y2 cnc controlled • Backgauge x range: 1000 mm • Backgauge fingers: 2 pcs • Stroke length: 330 mm Extra Information Tools Upper Tool Weight: 700 kg Lower Tool Weight: 1200 kg Clamping System: Heavy duty top clamping system Tooling System: European clamping system with 85° sectioned punch and 4-V die Crowning: CNC crowning on bottom table Front Support Arms: 2 pcs on linear rail Safety: Electrically interlocked side guards, light barriers Dimensions Dusdox D Nu Aopfx Ag Dep Machine Depth 4100 mm Technical Specification Bending Length 3100 mm

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Pipe diameter 14, 16, 18, 20 mm Duodpfxsx I S N Ho Ag Dsp • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Laser cooling unit (water-air) Excitation via Pump diodes Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: Dsdpfjx D Hg Asx Ag Dsup TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability